Jump to content
SAU Community

Recommended Posts

Think outside the box Toshi, the idle can be adjusted with the adjustment screw on the side of the cable throttle, im using an EA Ford one I think.

The stock ecu will go into limp mode which is 1200 revs, then the Emanage will take full standalone control = WIN. :thumbsup:

Enlarging the throttle will work to some extent but im just sick of the whole thing, I want full control of the air and attached to my foot. What's wrong with a throttle cable anyway?

I think if you change to wire throttle; idle up will not work (aircon and power steering etc) .

Also how to fix ecu feed back?

ok ill go for a drive tomorrow and see what the nismo ecu says on the informeter.

anyone got a small camera with an LED light you can stick right before the throttle body to see what it does?? :P

http://www.carsales....id=12C9CF966E63

OMG WTF cheap...tempting..................................................:ninja:

very nice.....looks like a money pit.....nice project for someone though!

ok ill go for a drive tomorrow and see what the nismo ecu says on the informeter.

anyone got a small camera with an LED light you can stick right before the throttle body to see what it does?? :P

Aldi were selling an inspection camera for $100 but I dont think you could record off it. Need a miniature bullet camera mounted in there. lol.

I think if you change to wire throttle; idle up will not work (aircon and power steering etc) .

Also how to fix ecu feed back?

By fitting my VQ30 ecu ( as apparently they do not have fly by wire although I have not been able to verify that myself). That should handle the basic functions and auto while the piggyback and ebc will take care of the turbo and engine management.

Aldi were selling an inspection camera for $100 but I dont think you could record off it. Need a miniature bullet camera mounted in there. lol.

Yeah, you can record onto one... automatically turns off after a few minutes though

I have one at my place atm :)

By fitting my VQ30 ecu ( as apparently they do not have fly by wire although I have not been able to verify that myself). That should handle the basic functions and auto while the piggyback and ebc will take care of the turbo and engine management.

Mate just sell it on Ebay or whatever......It wont work!.....I tried to give hint you a hint on that before!

It's different how? let's start with the way it plug's in.....and the list goes on....by the time you pay to get it sorted and if it works you would have been able to pay for a G-Zone and E-manage piggy back with the tune! ....the whole wire TB thing achievable with the correct aftermarket ECU doing the work.....next problem is the gearbox! this car is a f#$king mystery box!!!......you get past one problem only to find a new one!

Edited by Jetwreck

Toshi is under the impression there is some limp mode activated with the Emanage install causing my problem. If someone with a stock car and informeter could let him know that the stock car has the same issue? Apparently a reset could fix the issue acording to TEPS but im not holding my breath.

Quote:

If you can remove e-manage please try this.

ECU connector remove 10min then put back connector.

Throttle controller(aftermarket) connector remove.

Then Guideline for closed accelerator (throttle) position and rapid TAS guideline method.

Throttle controller connector put back.

Adjust throttle controller.

Then road test under 3000rpm.

If your problem will fix its throttle map problem.

As I cant remove my Emanage can somebody else please have a crack at this reset? Perhaps I need to lend my controller out to someone in Melbourne although im sure we are wasting our time. My ecu does have the engine light up though...

Does that method Scott/Toshii posted require an aftermarket throttle controller (ie device that modifies the resistance curve of the pedal)?

Oh, and I have no idea what the rapid TAS guideline method is either :P

Im not sure what call English スロットル全閉位置学習及び急速TAS学習.

I asked Jetwreck and he told me the translation to English is:

Guideline for closed accelerator (throttle) position and rapid TAS guideline method.

I saw many Japanese web site about this.

And some cars fixed throttle response.

Im searching about under 3000rpm problem on Japanese web but I can not fined it.

Japanese People install aftermarket throttle controller and they say its working very good.

So I can not ask to TEPS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...