Jump to content
SAU Community

Recommended Posts

Mate, I hope you do get something extra for having a Nismo ECU :blink: . You'd have to be annoyed at paying money for nothing more than you could get by cutting a wire.

Surely Nismo don't just disable that input and sell it for $800 or whatever?? That would be a huge scam if that was the case lol.

I can tell you this....If I put the Standard ECU or Impul on my car with the turbo I have on it its a Fat Black laggy POS.....4,800rpm before boost starts to climb. With the Nismo it was full boost by about 4,200rpm before the tune.....after the tune full boost by 3,200RPM and Cihan pulled some timing out because it was too reactive.

Kickdown has also been played with!

oh and I can do more than 171.5km/h. :P

I'll lay London to a brick that if a Nismo came up on IM you guy's would be all over it!.....it's the best plug and play mod you can get!...snipping the wire just let's you do burnout's!....well maybe not for Aaron :P

Edited by Jetwreck

I can tell you this....If I put the Standard ECU or Impul on my car with the turbo I have on it its a Fat Black laggy POS.....4,800rpm before boost starts to climb. With the Nismo it was full boost by about 4,200rpm before the tune.....after the tune full boost by 3,200RPM and Cihan pulled some timing out because it was too reactive.

Kickdown has also been played with!

oh and I can do more than 171.5km/h. :P

I'll lay London to a brick that if a Nismo came up on IM you guy's would be all over it!.....it's the best plug and play mod you can get!...snipping the wire just let's you do burnout's!....well maybe not for Aaron

i dont think it would still let anyone with a highflow do burnouts(stock ecu that is). without a high stall its only a little bit better...

i think my next challenge is to disable the attessa with a switch, and still be able to keep ABS.. the plug under the dash puts the 4WD light on, but i think it reacts the same and pushing the "synchro" switch.

which leads me to believe there is clearly more to the ECU than a throttle opening..

i dont think it would still let anyone with a highflow do burnouts(stock ecu that is). without a high stall its only a little bit better...

i think my next challenge is to disable the attessa with a switch, and still be able to keep ABS.. the plug under the dash puts the 4WD light on, but i think it reacts the same and pushing the "synchro" switch.

which leads me to believe there is clearly more to the ECU than a throttle opening..

You need awesome installed!thumbsup.gif

i dont think it would still let anyone with a highflow do burnouts(stock ecu that is). without a high stall its only a little bit better...

i think my next challenge is to disable the attessa with a switch, and still be able to keep ABS.. the plug under the dash puts the 4WD light on, but i think it reacts the same and pushing the "synchro" switch.

which leads me to believe there is clearly more to the ECU than a throttle opening..

One of my test launches yesterday (with brake switch disconnected) caused the 4WD light to come on :whistling:, but this mod doesn't mean instant burnouts.

Our ECU's are very much like women; I don't think any of us guys really understand how they work, but we know what we'd like them to do better, LOL

One of my test launches yesterday (with brake switch disconnected) caused the 4WD light to come on :whistling:, but this mod doesn't mean instant burnouts.

Our ECU's are very much like women; I don't think any of us guys really understand how they work, but we know what we'd like them to do better, LOL

LOL

yeh theres a plug attached to the OBD port, this is 'meant' to disable the 4WD. unplugging it certainly turns the 4WD light on, but it felt more so of 50/50 distro as i couldnt spin the wheels up at all and it was wet. but it definitely pulled as if the roads were dry..

i want more of a 0/100 lol

LOL

yeh theres a plug attached to the OBD port, this is 'meant' to disable the 4WD. unplugging it certainly turns the 4WD light on, but it felt more so of 50/50 distro as i couldnt spin the wheels up at all and it was wet. but it definitely pulled as if the roads were dry..

i want more of a 0/100 lol

why don't you try one of these then....use to have one on our old R32 GTR....worked very well.

http://www.ebay.com....=item19c5b4b24f

sent off a question asking them if it works for the M35.

Would like to see what our cars would run on the Dyno just in RWD!!!

Edited by Jetwreck

it would be something I could consider..

but i wouldnt know where to start with wiring it in succesfully I cant seem to find a diagram for our attessa wiring system..

but isnt that more for being able to split torque to the front when you want instead of when needed.

it says that normal mode is just 'stock'

it would be something I could consider..

but i wouldnt know where to start with wiring it in succesfully I cant seem to find a diagram for our attessa wiring system..

but isnt that more for being able to split torque to the front when you want instead of when needed.

it says that normal mode is just 'stock'

FFS!....isn't that what you want.....man your sizzled :P

It does for me. :)

Haha, yeah I know for a few of you guys it does. I was meaning for the majority of us with minimal mods, but you knew that & were just showing off ! LOL

why don't you try one of these then....use to have one on our old R32 GTR....worked very well.

http://www.ebay.com....=item19c5b4b24f

sent off a question asking them if it works for the M35.

Would like to see what our cars would run on the Dyno just in RWD!!!

I enquired about this one a while ago & it's never been used in a M35 yet. I can't see why it wouldn't work with our cars, but.....

OK, found the message:

"As far as I know no one is using one on an M35. If you want to take some photos of the G-sensors and connector under the center console I can certainly tell you if it is likely to work and I would be willing to refund your unit if it turned out not to be suitable after trying.

Regards Justin"

I really wanted more front wheel torque for those wet days when you want to get where you're going quicker & with less RWD "fun".:happy:

Edited by Commsman

I enquired about this one a while ago & it's never been used in a M35 yet. I can't see why it wouldn't work with our cars, but.....

OK, found the message:

"As far as I know no one is using one on an M35. If you want to take some photos of the G-sensors and connector under the center console I can certainly tell you if it is likely to work and I would be willing to refund your unit if it turned out not to be suitable after trying.

Regards Justin"

I really wanted more front wheel torque for those wet days when you want to get where you're going quicker & with less RWD "fun".:happy:

dont you have a synchro button?

dont you have a synchro button?

Yes I do :yes: But so what?

You're going to tell me that using syncro will engage proper 4WD, right?... Well when I do that it feels like I'm driving a 4WD with the front hubs locked. You know, harder to turn in tight spaces etc. What I want is partial or progressive front wheel torque, without the "lock up" feel.:huh:

LOL

yeh theres a plug attached to the OBD port, this is 'meant' to disable the 4WD. unplugging it certainly turns the 4WD light on, but it felt more so of 50/50 distro as i couldnt spin the wheels up at all and it was wet. but it definitely pulled as if the roads were dry..

i want more of a 0/100 lol

did you unplug it and pump the break pedal 5 times?

Yes I do :yes: But so what?

You're going to tell me that using syncro will engage proper 4WD, right?... Well when I do that it feels like I'm driving a 4WD with the front hubs locked. You know, harder to turn in tight spaces etc. What I want is partial or progressive front wheel torque, without the "lock up" feel.:huh:

lol yehhhhmellow.gif

i liked it, mine doesnt feel to jittery

did you unplug it and pump the break pedal 5 times?

yeh it doesnt do anything.. but i figured out full time RWD read the attesa thread.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...