Jump to content
SAU Community

Recommended Posts

Mate, I hope you do get something extra for having a Nismo ECU :blink: . You'd have to be annoyed at paying money for nothing more than you could get by cutting a wire.

Surely Nismo don't just disable that input and sell it for $800 or whatever?? That would be a huge scam if that was the case lol.

I can tell you this....If I put the Standard ECU or Impul on my car with the turbo I have on it its a Fat Black laggy POS.....4,800rpm before boost starts to climb. With the Nismo it was full boost by about 4,200rpm before the tune.....after the tune full boost by 3,200RPM and Cihan pulled some timing out because it was too reactive.

Kickdown has also been played with!

oh and I can do more than 171.5km/h. :P

I'll lay London to a brick that if a Nismo came up on IM you guy's would be all over it!.....it's the best plug and play mod you can get!...snipping the wire just let's you do burnout's!....well maybe not for Aaron :P

Edited by Jetwreck

I can tell you this....If I put the Standard ECU or Impul on my car with the turbo I have on it its a Fat Black laggy POS.....4,800rpm before boost starts to climb. With the Nismo it was full boost by about 4,200rpm before the tune.....after the tune full boost by 3,200RPM and Cihan pulled some timing out because it was too reactive.

Kickdown has also been played with!

oh and I can do more than 171.5km/h. :P

I'll lay London to a brick that if a Nismo came up on IM you guy's would be all over it!.....it's the best plug and play mod you can get!...snipping the wire just let's you do burnout's!....well maybe not for Aaron

i dont think it would still let anyone with a highflow do burnouts(stock ecu that is). without a high stall its only a little bit better...

i think my next challenge is to disable the attessa with a switch, and still be able to keep ABS.. the plug under the dash puts the 4WD light on, but i think it reacts the same and pushing the "synchro" switch.

which leads me to believe there is clearly more to the ECU than a throttle opening..

i dont think it would still let anyone with a highflow do burnouts(stock ecu that is). without a high stall its only a little bit better...

i think my next challenge is to disable the attessa with a switch, and still be able to keep ABS.. the plug under the dash puts the 4WD light on, but i think it reacts the same and pushing the "synchro" switch.

which leads me to believe there is clearly more to the ECU than a throttle opening..

You need awesome installed!thumbsup.gif

i dont think it would still let anyone with a highflow do burnouts(stock ecu that is). without a high stall its only a little bit better...

i think my next challenge is to disable the attessa with a switch, and still be able to keep ABS.. the plug under the dash puts the 4WD light on, but i think it reacts the same and pushing the "synchro" switch.

which leads me to believe there is clearly more to the ECU than a throttle opening..

One of my test launches yesterday (with brake switch disconnected) caused the 4WD light to come on :whistling:, but this mod doesn't mean instant burnouts.

Our ECU's are very much like women; I don't think any of us guys really understand how they work, but we know what we'd like them to do better, LOL

One of my test launches yesterday (with brake switch disconnected) caused the 4WD light to come on :whistling:, but this mod doesn't mean instant burnouts.

Our ECU's are very much like women; I don't think any of us guys really understand how they work, but we know what we'd like them to do better, LOL

LOL

yeh theres a plug attached to the OBD port, this is 'meant' to disable the 4WD. unplugging it certainly turns the 4WD light on, but it felt more so of 50/50 distro as i couldnt spin the wheels up at all and it was wet. but it definitely pulled as if the roads were dry..

i want more of a 0/100 lol

LOL

yeh theres a plug attached to the OBD port, this is 'meant' to disable the 4WD. unplugging it certainly turns the 4WD light on, but it felt more so of 50/50 distro as i couldnt spin the wheels up at all and it was wet. but it definitely pulled as if the roads were dry..

i want more of a 0/100 lol

why don't you try one of these then....use to have one on our old R32 GTR....worked very well.

http://www.ebay.com....=item19c5b4b24f

sent off a question asking them if it works for the M35.

Would like to see what our cars would run on the Dyno just in RWD!!!

Edited by Jetwreck

it would be something I could consider..

but i wouldnt know where to start with wiring it in succesfully I cant seem to find a diagram for our attessa wiring system..

but isnt that more for being able to split torque to the front when you want instead of when needed.

it says that normal mode is just 'stock'

it would be something I could consider..

but i wouldnt know where to start with wiring it in succesfully I cant seem to find a diagram for our attessa wiring system..

but isnt that more for being able to split torque to the front when you want instead of when needed.

it says that normal mode is just 'stock'

FFS!....isn't that what you want.....man your sizzled :P

It does for me. :)

Haha, yeah I know for a few of you guys it does. I was meaning for the majority of us with minimal mods, but you knew that & were just showing off ! LOL

why don't you try one of these then....use to have one on our old R32 GTR....worked very well.

http://www.ebay.com....=item19c5b4b24f

sent off a question asking them if it works for the M35.

Would like to see what our cars would run on the Dyno just in RWD!!!

I enquired about this one a while ago & it's never been used in a M35 yet. I can't see why it wouldn't work with our cars, but.....

OK, found the message:

"As far as I know no one is using one on an M35. If you want to take some photos of the G-sensors and connector under the center console I can certainly tell you if it is likely to work and I would be willing to refund your unit if it turned out not to be suitable after trying.

Regards Justin"

I really wanted more front wheel torque for those wet days when you want to get where you're going quicker & with less RWD "fun".:happy:

Edited by Commsman

I enquired about this one a while ago & it's never been used in a M35 yet. I can't see why it wouldn't work with our cars, but.....

OK, found the message:

"As far as I know no one is using one on an M35. If you want to take some photos of the G-sensors and connector under the center console I can certainly tell you if it is likely to work and I would be willing to refund your unit if it turned out not to be suitable after trying.

Regards Justin"

I really wanted more front wheel torque for those wet days when you want to get where you're going quicker & with less RWD "fun".:happy:

dont you have a synchro button?

dont you have a synchro button?

Yes I do :yes: But so what?

You're going to tell me that using syncro will engage proper 4WD, right?... Well when I do that it feels like I'm driving a 4WD with the front hubs locked. You know, harder to turn in tight spaces etc. What I want is partial or progressive front wheel torque, without the "lock up" feel.:huh:

LOL

yeh theres a plug attached to the OBD port, this is 'meant' to disable the 4WD. unplugging it certainly turns the 4WD light on, but it felt more so of 50/50 distro as i couldnt spin the wheels up at all and it was wet. but it definitely pulled as if the roads were dry..

i want more of a 0/100 lol

did you unplug it and pump the break pedal 5 times?

Yes I do :yes: But so what?

You're going to tell me that using syncro will engage proper 4WD, right?... Well when I do that it feels like I'm driving a 4WD with the front hubs locked. You know, harder to turn in tight spaces etc. What I want is partial or progressive front wheel torque, without the "lock up" feel.:huh:

lol yehhhhmellow.gif

i liked it, mine doesnt feel to jittery

did you unplug it and pump the break pedal 5 times?

yeh it doesnt do anything.. but i figured out full time RWD read the attesa thread.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...