Jump to content
SAU Community

Recommended Posts

Yeh, I used to have a set on mine too. They're not ideal. post-61153-0-51601300-1302746704_thumb.jpg 20mm spacers would help a lot.

I now have these; post-61153-0-09558200-1302746830_thumb.jpg V35 18x8, +30 offset. Much betterthumbsup.gifpost-61153-0-78944500-1302747133_thumb.jpg

Yep - I've got 350z 18 x 8 +30 on mine and they fit pretty well.

Thought I'm looking at a set of 370z 18 x 9 + 15 :pirate:

Yep - I've got 350z 18 x 8 +30 on mine and they fit pretty well.

Thought I'm looking at a set of 370z 18 x 9 + 15 :pirate:

ahhhh.....now I know why you've been trawling the Z club!!!!!

Yep - I've got 350z 18 x 8 +30 on mine and they fit pretty well.

Thought I'm looking at a set of 370z 18 x 9 + 15 :pirate:

Now that would be a nice upgrade :thumbsup:

And the Akebono brakes would be a no brainer...

Now that would be a nice upgrade :thumbsup:

And the Akebono brakes would be a no brainer...

Nah already have a set of 350z brembos...just need braided lines...

I thought about getting the Akebonos but from what I've read on a few G37/z forums they're no better then the brembos...apparently nissan switched from Brembos to save cost...

Nah already have a set of 350z brembos...just need braided lines...

I thought about getting the Akebonos but from what I've read on a few G37/z forums they're no better then the brembos...apparently nissan switched from Brembos to save cost...

Forgot you had the Brembo's pinch.gif

Yep, know what you mean; bloody big tho'...

Edited by Daleo

Hey guy's found this awesome buy on Import Monster

Going cheap......retails for $1,500 to $1,600 normally.

http://www.importmon....jpg&title=NM35

Good luck....and happy biddingthumbsup.gif

Hmm I wonder who won these...:ph34r::whistling:

BTW are these Bilsteins?

http://www.importmonster.com.au/view?url=http://page.auctions.yahoo.co.jp/jp/auction/146104507&thumb=http://f2.auctions.c.yimg.jp/img353.auctions.yahoo.co.jp/users/6/1/8/3/hgmaja-thumb-1299929472746181.jpg&title=M35%202WD

Looks like for PM35s only

Hmm I wonder who won these...:ph34r::whistling:

BTW are these Bilsteins?

http://www.importmon...title=M35%202WD

Looks like for PM35s only

C#$K....I bid on em the week before and they went $15 above my bid price......then they went back on and no bid against you at all!!!...I could have bid too...but i didn't think it would go that cheap as I went higher than you did!

good luck with em....hope you chassis cracks in half!!!!!! :P

oh great by btw!!!!thumbsup.gif

C#$K....I bid on em the week before and they went $15 above my bid price......then they went back on and no bid against you at all!!!...I could have bid too...but i didn't think it would go that cheap as I went higher than you did!

good luck with em....hope you chassis cracks in half!!!!!! :P

oh great by btw!!!!thumbsup.gif

Meh with all the issues I've got in my car I think my chassis is already cracked...

Might get a set of 12/10 made up by silkroads and ship em out st them same time lol.

  • 3 weeks later...
  • 3 weeks later...

Craig...looks like there's another set available...

http://www.importmon....jpg&title=NM35

A large batch must have fallen off a truck or something for them to go for 1/2 the regular price!

Nah....don't need em....happy with Mutant Bilstein/Nismo setup I have.

Still working on more power!ph34r.gif

They're 16/10 spring rate, are BCs 12/10 or 10/8?

It isn't on the Just Jap site and I couldn't find it on here.

Just curious how much stiffer the Silk Roads would be... Pretty ironic if they're going to be teeth rattling stiff.

Just curious how much stiffer the Silk Roads would be... Pretty ironic if they're going to be teeth rattling stiff.

I'll let you know in a month's time....:pirate:

Worse comes to worse Streeter said I could order matching springs at a lower rate, say 12kg fronts...

Edited by ironpaw
  • 3 weeks later...

Any one able to post some shots of there M35 fitted with BC's? Shots of the fitment rather than ride bight would be great, love to see how they are height adjustable in the rear being a separate spring/shock set up.

Mike.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...