Jump to content
SAU Community

Recommended Posts

yup the softest setting on mine is pretty pussy, but its firm, like a new car.

i run mine around 7-8 at the rear, and about the same at the front, maybe a little softer so it doesnt rattle the entire front end off the car

It's always interesting to see the differences in peoples preferences, even when using very similar set ups. Stiff is not necessarily fast; but it can often give that impression.

I'm running 3 clicks in from full soft on the rear, and fully soft on the front. Before fitting my Sway Bars, I was running 3 clicks in from full soft on the front to get some bite on turn in, but once I had the bars on, I found the front wanted to follow every groove and was just too "darty" on turn in and had to soften it. I'm not running any Preload on my front springs as I feel it only adds to the bouncy feel (springs pushing back too hard on rebound) some people find with coilovers.

I still have stacks of bite on turn in, but the front end is much more compliant over choppy stuff and I believe it has more "feel" and is quicker in corners now. I think if you set up too stiff, you don't allow the weight transfer that is needed to get good mid corner grip and feedback. You just end up with a really sudden transition to understeer/oversteer; especially in wet conditions.

Like I said, not saying anyone is right or wrong; but I'm interested in others opinions in this regard.

Cheers, Dale.

Front 10kg/mm, rear 12kg/mm. That's the BR's, not sure about the V1's.

I'll go the BR's as there isn't much of a price difference.

Also where do you get adjustable bushes for the standard arms?

Cheers.

Front 10kg/mm, rear 12kg/mm. That's the BR's, not sure about the V1's.

I'll go the BR's as there isn't much of a price difference.

Also where do you get adjustable bushes for the standard arms?

Cheers.

I'll go the BR's as there isn't much of a price difference.

Are you getting yours thru Paul at Street to Track (www.streettotrack.com) ?

Price via him is $1,165 delivered. He won't sell the V1's, only the BR series.

I'll go the BR's as there isn't much of a price difference.

Also where do you get adjustable bushes for the standard arms?

Cheers.

http://www.superpro.com.au/find-superpro-parts-for-my-vehicle?listMake=51&listModel=334&listSeries=485&button=Search+Now

Whiteline do replacement bushes, but no adjustable one as far as I know.

Are you getting yours thru Paul at Street to Track (www.streettotrack.com) ?

Price via him is $1,165 delivered. He won't sell the V1's, only the BR series.

I was just going to go through just jap, has any one purchased through Paul?

Just got a quote from Paul, he's down to $1155 for the BC BRs. Got to love this dollar at the moment! 10 days delivery.

At that price, why would you buy V1s from Just Jap? They want $1149!

I need to do mine sooner rather than later, it just wallows awfully. Really ruins the great effect of the swaybars :(

Hi guys, been trolling through this thread for some time trying to find info on AXIS suspension.. but that aside. With all this talk of kg rates for fronts and rears.. doesn't ride quality also come down to rim size and tyres? I have 35 series tyres on 20" rims (came with the rims) with stock suspension. while being quite comfy it will still jar when hitting bumps and holes and will hop badly if taking a corner in a spirited manner :P and hitting a bump. Shouldn't there be a balance between tyre sizing and suspension tweaking? I know when I finally get my head around this car I will definitely be changing tyre sizes (maybe even rim size) and then try to balance the suspension to suit my driving. Not that there's much selection for the AXIS :(

So just in case I've missed something, is there anything adjustable available for the AXIS??

I think AXIS is the same as any other NM35, so you should be fine with the BCs.

I know what you mean with tyres, found the same thing when I bought a car with 17" 35 series. Awful ride. Hated it. I'll be putting 18s or 19s on mine, the biggest I can use while maintaining 40-45 profile.

Funny thing is my parents have an Audi they bought with 19" 35 profile tyres, and the ride is fine.

Hi guys, been trolling through this thread for some time trying to find info on AXIS suspension.. but that aside. With all this talk of kg rates for fronts and rears.. doesn't ride quality also come down to rim size and tyres? I have 35 series tyres on 20" rims (came with the rims) with stock suspension. while being quite comfy it will still jar when hitting bumps and holes and will hop badly if taking a corner in a spirited manner :P and hitting a bump. Shouldn't there be a balance between tyre sizing and suspension tweaking? I know when I finally get my head around this car I will definitely be changing tyre sizes (maybe even rim size) and then try to balance the suspension to suit my driving. Not that there's much selection for the AXIS :(

So just in case I've missed something, is there anything adjustable available for the AXIS??

IMO it does.....low profile IMO can look better(sometimes) but does mean better handling......I don't mind having a bit of a sidewall on the tyre not only to save the rim but to also stuff around with pressures to ensure the best response from your grip level in all circumstances......a bumpy road with 35 series tyres at speed can end up pretty messy and usually slower that 45 series tyres......naturally this all depends on the tyres your running!blush.gif

I think AXIS is the same as any other NM35, so you should be fine with the BCs.

I know what you mean with tyres, found the same thing when I bought a car with 17" 35 series. Awful ride. Hated it. I'll be putting 18s or 19s on mine, the biggest I can use while maintaining 40-45 profile.

Funny thing is my parents have an Audi they bought with 19" 35 profile tyres, and the ride is fine.

I thought i was in the same boat as ARX owners, being that we have HICAS and the wider track and higher stock suspension. I see the 'non ARX' note on each set of suspension and so fear the worst.

what width tyres are on the Audi? If they were like 335's or something killer like that the 35 profile would be much thicker than on our 225's and 235's

I'm actually thinking to change my rims to something smaller, maybe slightly wider and definitely thicker. I hate gutter bash so need bumper bowling tyres lol

IMO it does.....low profile IMO can look better(sometimes) but does mean better handling......I don't mind having a bit of a sidewall on the tyre not only to save the rim but to also stuff around with pressures to ensure the best response from your grip level in all circumstances......a bumpy road with 35 series tyres at speed can end up pretty messy and usually slower that 45 series tyres......naturally this all depends on the tyres your running!blush.gif

agreed on all counts. sidewall definitely helps keep power to the ground, look at street drag radials. they can hook 1000hp no problem.. and its street legal! If the Stagea wasn't 4wd I would love to put a fat tyre on the rear, both for ride and handling

I thought i was in the same boat as ARX owners, being that we have HICAS and the wider track and higher stock suspension. I see the 'non ARX' note on each set of suspension and so fear the worst.

Axis is the same as RX and RS models for suspension.

RX and RS can both have HICAS.

Axis is the same as RX and RS models for suspension.

RX and RS can both have HICAS.

Sorry mate, RX never had hicas as an option.

and AXIS has lower springs and different shocks, but yes the suspension is setup the same.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...