Jump to content
SAU Community

Bolt Ons... I Feel Like Im Missing A Few Things.

R33LOD
 Share

Recommended Posts

SLEEPR85 Proficient

SLEEPR85

Posted
Posted
Airbox, pod, AFM, front mount, computer, high flow t28, boost controller, custom low mount manifold, full exhaust, screamer, BBS 17x11, semi slicks, fuel pump, fuel reg... what else can i bolt on to maximize the above?

What do you mean? Do you want more power? I didn't see any suspension mods, have you considered changing suspension setup to fully optimise your power delivery.....

CR34M Community Regular

CR34M

Posted
Posted

Sparkplugs, injectors, valve springs, plenum, oil cooler, tranny cooler, SURGE TANK!!!!!!!

Guess it depends how far you want to go and what power your making, the suspension is a good idea to get a good response out of the power your making and depending on what power your making a surge could help sort out niggles in the process, valve springs will help with the surging aswell i guess.

Why don't you rebuild your engine now? :(

Iron Chef Grand Master

Iron Chef

Posted
Posted
Im after more power.

Car is at a workshop right now, before i get it tuned i want to bolt on as much shit as i possibly can, then ill look at the suspension.

You, my friend, have got it backwards.

Messiah Mentor

Messiah

Posted
Posted
You, my friend, have got it backwards.

best to let him learn this for himself IC, he'll do is power mods no matter what we say... but he'll learn real fast when he takes it out cant put it to the road and smaller lesser powered cars drive right on by.

R33LOD Contributor

R33LOD

Posted
  • Author
Posted

Believe me guys i know the importance of suspension, grip, tuning but for now my main aim is power from bolt ons.

I want to basically buy it from the shop and put it on myself then get it all tuned.

Reason being is i just want to look good on the dyno sheet for now :(... ill fix the rest up a little later down the track.

Messiah Mentor

Messiah

Posted
Posted
Airbox, pod, AFM, front mount, computer, high flow t28, boost controller, custom low mount manifold, full exhaust, screamer, BBS 17x11, semi slicks, fuel pump, fuel reg... what else can i bolt on to maximize the above?

ya know looking at it i think you've got all the tack on bits done... for anything else (cams etc) you need to open things up. you could do a set of adjustable cam gears... or maybe a bigger turbo... but thats all that comes to mind... or a nice set of coil overs... you know while the cars in the shop and all.... get it over and done with.

or if u have a big budget.... rebuild ?? :(

Benzino33 Experienced

Benzino33

Posted
Posted
Ive had a suggestion from my mate at the workshop, said to f**k the AFM off and go with a MAP sensor.

How much difference will that make?

how much do u wanna spend!!?

thommo Mentor

thommo

Posted
Posted
Ive had a suggestion from my mate at the workshop, said to f**k the AFM off and go with a MAP sensor.

How much difference will that make?

change your turbo and get it tuned properly by a competent tuner if you want more power.

even better, go to a decent tuner and ask them. they will tell you what needs to be done to it, better than any advice you'll get outta this thread or from a mate in a workshop who tells you you'll get more power changing from an afm to map...

ps - you're running semi slicks but havent thought hard about suspension?? :)

R33LOD Contributor

R33LOD

Posted
  • Author
Posted

Semi slicks were second hand so i bought em for the sake of it lol :) I run RE050 tyres now, use the semis for the track which is rarely.

The car is just for street i dont want hard suspension because the hume highway, canterbury rd etc... are a f**ken pain in the ass !!!!

I did mention i have an aftermarket ECU (computer) in my first post, just didnt mention which one. And i rather not say as not to get laughed at :D

The wheels are actually 17x10.5, they dont hang out but they are basically in line with the wheel well and they miss the suspension by about 1cm, which is why i went wider instead of 18's. Ill show you pictures. Front wheels are 17x9, i forgot to mention that.

My mate at the workshop didnt say the MAP would make a huge difference but he did say its better than an AFM for later when i do start going breserk on tuning :(

Are there any other bolt ons other than throttle body, plenum, fuel rail, injectors and up the sparking package. Can i just buy all the parts, bolt em together then swap em into the car? Or is it a little more than that?

Thanks guys :P

daisu Mentor

daisu

Posted
Posted
Reason being is i just want to look good on the dyno sheet for now :D... ill fix the rest up a little later down the track.

The dyno operator can make anything look good on a sheet of paper if that's all you want........ :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      Ok guys thank you very much. GCG highflow it is then 🙂 
    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...