Jump to content
SAU Community

Recommended Posts

Just introducing myself and saying a big hello to everyone!! :D

I only just recently became the proud owner of a '93 R33 GTS-T...after having written off my last car. Long story but it gave me the excuse to finally buy a car i really wanted!! :(

Its needs a good bit of work to get her to where i want it...pretty standard as is. But in very good condition inside and out. So i will probably be on here a bit calling out for help!! :rofl:

Looking forward to getting to know some of you guys and gals, and perhaps meeting you in the near future.

Cheers! :cheers:

Link to comment
https://www.sau.com.au/forums/topic/26997-hi-guys/
Share on other sites

Gods_Gift,

Glad to see you made it, the guys and gals in here are a good bunch of peeps and can help you out with just about any question you have with liners. Drop over for coffee again if you want. Good to see that you have finally got your hands on a GREAT car hehehe ENJOY. See ya at the show.

:band:

Link to comment
https://www.sau.com.au/forums/topic/26997-hi-guys/#findComment-569474
Share on other sites

Hey gods gift,

nice of you to introduce

dont be a stranger at the stand

it will be annoying like when we go on cruises and ppl stand with their mate and pretend like the other 4000000 skylines parked in the carpark dont exist

anyways i will meet you there. and people i am so pissed i cant have my line parked outside *sniff*. maybe Tim will park it there for me.

lata

RiaZ

Link to comment
https://www.sau.com.au/forums/topic/26997-hi-guys/#findComment-569527
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...