Jump to content
SAU Community

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I've been keeping track of my fuel consumption on my iPhone...

Because of work I'm also making lots of short trips of about 10 min / 2 to 9Km every hour or so... ...I think I got around 600Km on a GOR cruise once and around the same going up to Swan Hill... ...But that was before I started recording my fuel...

post-31686-1243000906_thumb.png

post-31686-1243000916_thumb.png

i used to get approx 450km (30km of that after fuel light on) max. fairly stock auto. haven't had a chance to check economy recently as i've had it tuned, and still in the "honeymoon" phase :D

I don't think I've ever seen the fuel light... ...How low does the needle get before it comes on???...

I don't think I've ever seen the fuel light... ...How low does the needle get before it comes on???...

For my car, it came on when the needle is like about 1/2cm or so under the E line.

& I only know this because when I picked up my car from the panel shop, they pretty much drained all the fuel out & I was driving on empty :( .

Thanx JamesK,

i got an autoban just down the road from me, ill pop in there on the weekend and see wat they can do for me about an o2 sensor,

hopfully that might get some more ks, if not, it cant hurt getting a new one :)

Forget autobarn, save some $$$ and time and order from HERE $77 and quick delivery.

I've never been brave enough to let it get that low... :(

Dont you mean stupid enough, efi fuel pumps dont like running dry.

Replaced the oxygen sensor tonight. Got her up on the hoist and laughed at why I even bothered putting it up there when the sensor was clearly visible from the engine bay. Then I ate my words when a seemingly 2 minute job turned into 2 hours. The positioning of the sensor is so damn awkward. Near impossible to get a grip on the sensor nut with a torque-worthy tool. My open ended spanner kept slipping...shifter couldn't get a grip...socket wouldn't fit over sensor. Didn't want to thread the sensor nut so I resorted to snipping the sensor wires in order to get an angled ring spanner over the nut (forcing me to get the new sensor installed or being unable to drive home). Still had no room to get any decent leverage though. Had to remove the heat shields from turbo and exhaust - the screws of which were rusted through and threaded themselves when I tried to remove them. Drilled some of them out and vowed not to put the shields back on afterwards. I was quite literally bracing myself against the car chassis while trying to unhinge that rusted piece of crap sensor. After every swear word in 4 or 5 languages she finally cracked. Putting in the new one took the other half of the 2 minutes I had originally intended to spend on this.

/end rant.

Here's hoping my fuel economy improves because my anger management sure isn't.

Oops should of posted up earlier I have an O2 Sensor socket if anyone nearby wants to borrow it...it does make your job a crap load easier as birds may have found out that damn thing is in tight!

My sky is on average on about 11.4L which i was happy with UNTILL my car broke down and started driving my brothers spare care, 1.8L Corolla. Geezzz, fill 40 L, done 550kms and i still got one line to empty. I cant belive the difference. You save about 7 dollars per 100kms. woow

In saying that, the car has no balls nor handling nor looks nor anything else. lol just a lil engine.

ive never seen a fuel light come on ever..

didnt know there was one

There is guys, trust me I was in the same boat as you guys but it only comes on when your needle is ON E like basically the light is REFUEL NOW!...haha but in the manual it says there is 7 or so lts left in the tank and even when your start to get at that level it will still start to fade on and off until I think about 5lt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...