Jump to content
SAU Community

Recommended Posts

Finally towed with my 4.8 patrol.

Must say it was super impressive. The car is big enough that the trailer had absolutely no effect on the car whatsoever, apart from the obvious lack of pace up hills.

Didn't make the car sway or in any way shape or form feel uncomfortable, brakes were good. Towed easily up to 120lm/h with little throttle.

photo1349937694.jpg

Edited by Granthem

XR6 Turbo engine and box/loom are pretty cheap. Chuck it on gas and should still be a decent enough thing economy wise...sound better too. This animal even has blinds. Is it wrong to want your first car again 18 years later?

I know mate, and I too have a soft spot for old Vals. But, that's cheap enough to buy just to enjoy it as is as a "creeper". To turn it into even a half capable tow car will be a 30k+ experience. Not just an engine/box, but everything. From brakes, to diff, to body repairs and strengthening. 60's Valiants weren't ever designed with the stresses of towing 2,000kg with a grunty modern engine pegging it down the road.

So, I maintain, stop it. (With all due respect) :)

XR6 Turbo engine and box/loom are pretty cheap. Chuck it on gas and should still be a decent enough thing economy wise...sound better too. This animal even has blinds. Is it wrong to want your first car again 18 years later?

No don't. Just don't.

I just towed with my XR6T... Too much strain on the gearbox. Don't do it.

I know mate, and I too have a soft spot for old Vals. But, that's cheap enough to buy just to enjoy it as is as a "creeper". To turn it into even a half capable tow car will be a 30k+ experience. Not just an engine/box, but everything. From brakes, to diff, to body repairs and strengthening. 60's Valiants weren't ever designed with the stresses of towing 2,000kg with a grunty modern engine pegging it down the road.

So, I maintain, stop it. (With all due respect) :)

Man, my old val had a rebuilt 245, box and diff with nothing special in the brakes department it towed 32' boats, Chev Impalas, RX3s :) I bought it off my mechanic that didnt want to tow with his Calais so this was the workhorse with mechanicals that he rebuilt. That's why it was a good buy. It certainly didnt tow like a landcruiser but it did the job :) Will have to wait and see how tidy this thing is this weekend

Back in the days of the Sahara Forrest towing a 32' boat with a Valiant may have been more acceptable. But so were flares and wicked side burns.

Upon refelction.... yeah, do it! Flares and side burns are cool, 'specially ginger side burns....

You guys bring back memories. Back in the day we used to tow our ski boat to Eppalock with a VE slant six station wagon. Prob one of the best, most honest cars I've owned/ driven. Had to put it down after smoke started pouring through the steering wheel, still got us home though towing the boat till the end.

Go the tow Val, towing is not rocket science, you just have to be aware of what is going on and adjust accordingly. Any dumbo can tow with a Landcruiser, brute force may be foolproof but it is not essential.

^^^^ I know. I once towed a 23' Sharkcat on a tri-axle trailer (no brakes whatesoever) witha AE86 twin cam Corolla Seca.

That proves that anything CAN be done, if you're careful enough (yes, I'm still breathing!), but, in today's litegeous society, you might not get away with the same level of bravado.

Truthfully, why some of you even bother wasting precious typing with "can I" type question is a total loss to me...... do what you want. Darwin will sort it ;)

'Can I' questions are seekers of approval, if someone says 'yes' then you feel a whole lot better when thinking of doing something dodgy :yes: BTW, can I....... :devil:

Edited by 260DET

Some of the 4WD hire mobs have tow bars fitted to the cars. Try someone that hires mine spec vehicles - they usually have tow bars fittes.

I think you normally pay around $120-150 a day for a mine spec vehicle (usually a Prado / Hilux or Landcruiser). Pricey, but still cheaper than having to buy one, and you travel in relatively modern comfort.

Quick google search turned up this mob.

Places like Mackay or Newcastle will have an abundance of mine spec hire places, but Brisbane might be a bit light on.

Done about 30k in the q7 now(half towing) still can confirm the armchair on wheels is awesome

Fatz, what sort of pin setup are you running on your trailer?

Think I need my reprogrammmed, it keeps telling me my tail lights on the trailer are blown, despite brake lights and indicators working...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...