Jump to content
SAU Community

Recommended Posts

I was wondering why they only have a towing capacity of 3T compared to other cars with less NM that have 3.5T... We looked at an ST550 and it didnt look all that exciting! Would be nice to tow a nissan with a nissan though :P

Because they like a couple of other manufacturers realised that as you push towing capacity super high, you stress the hell out of things, and end up with chassis' cracking and other items breaking.

I have a silver d40 nav towing my silver r33, pretty cool, now nust have too black out the chrome and wheels to match the 33 for looks...

New smf clutch to go in and all should be sweet...

Haha yeah we had the cruiser and skyline theme sorted but now with the addition of the Ranger we have some work to do...

Only mods coming at this stage is a 76mm nudge bar and light bar and ARB canopy... Should be all fitted by the end of the month hopefully!

10341435_643906339019621_527455224666609

It tows so well in comparison to the cruiser i nearly forgot the trailer was there :P

  • Like 1

Just a little bit jelly. Should look good once she's all kitted up.

Oh and window tint too!

We wanted to get black wheels and a bullbar etc but all of the bars stick out too far and the wheels just look cheap and nasty.... We decided just to keep them stock until we find something and until the bank account recovers lol

Oh and window tint too!

We wanted to get black wheels and a bullbar etc but all of the bars stick out too far and the wheels just look cheap and nasty.... We decided just to keep them stock until we find something and until the bank account recovers lol

Sunraysias? They're cheap as shit.

Sunraysias? They're cheap as shit.

Yeah but they look cheap as shit on late model cars too :P They looked awesome on the cruiser but just wouldn't have the same look on the ranger imo!

Anyway, got to put the money towards the nugget 34 anyway...

  • Like 1
  • 1 month later...

Thread bump :>

Long story cut short I am in the market for a part time tow vehicle / full time daily that can handle towing my 33 GTR. With a ~700kg trailer, that will take total tow weight to around 2100kg. Looking at a dual axle trailer with electronic braking.

As I said, this will be my daily driver to get to work and stuff, so a big tanky landcruiser or patrol is not ideal (not to mention the petrol costs). I would estimate towing the GTR ~10 times a year or less for 45 minutes each way (race track and back), but would like the capacity to handle an annual trip down to Sydney for WTAC. In reality this is 8 parts daily and 2 parts tow.

Budget is.. well I originally said $15k, but have been considering things priced around $20k if they are a good solution. I do like my creature comforts, so comfy seats and a nice stereo is a big plus.

Current ideas (and examples):

Mitsubishi Pajero (2 door version): http://www.carsales.com.au/private/details/Mitsubishi-Pajero-2009/SSE-AD-2787154/

Kia Sorento: http://www.carsales.com.au/private/details/Kia-Sorento-2007/SSE-AD-2854481/

VW Toureg: http://www.carsales.com.au/private/details/Volkswagen-Touareg-2007/SSE-AD-2913717/

Anyone have thoughts/opinions/other options ?

Strik3r,

After considering various SUV type cars earlier this year, including VW, Porsche, BMW etc, I bought an FG G6E Turbo with a 2300 kg towbar for this job - cost just over $20K. We've got an R33 GTST, and like you will probably tow it 10 - 12 times a year for relatively short distances.

The FG is my daily, and is quiet & comfortable, with reasonable economy and a shit-load of power & torque. The trailer is being built now, and I know we'll have to play with car position to get the ball weight right.

I recently towed the car on a hire trailer and realised I may need some torsion bars to level the combo, but the car's power made the job very easy. The FG is no more reliable than a used Euro or Korean SUV, but parts are cheap & readily available. It wasn't my initial first choice - son talked me into it - but pretty happy so far.

  • Like 1

Strik3r,

After considering various SUV type cars earlier this year, including VW, Porsche, BMW etc, I bought an FG G6E Turbo with a 2300 kg towbar for this job - cost just over $20K. We've got an R33 GTST, and like you will probably tow it 10 - 12 times a year for relatively short distances.

The FG is my daily, and is quiet & comfortable, with reasonable economy and a shit-load of power & torque. The trailer is being built now, and I know we'll have to play with car position to get the ball weight right.

I recently towed the car on a hire trailer and realised I may need some torsion bars to level the combo, but the car's power made the job very easy. The FG is no more reliable than a used Euro or Korean SUV, but parts are cheap & readily available. It wasn't my initial first choice - son talked me into it - but pretty happy so far.

Keep that ZF6 gearbox VERY well serviced, be prepared to use 3rd on the freeway and let speed drop (Don't force it to hold speed up hills) or you WILL be up for a very expensive gearbox rebuild.

Also keep a check on diff and blade bushes to keep the rear end in check. Oh, and have fun with fuel usage...

If he only has to tow for 45 minutes the an FG turbo wouldn't be so bad. If you're really worried about economy, get one with injected gas.

I've always towed with Falcon's including a couple of turbo's and they're awesome to tow with. The only thing they lack is weight to make towing a big load a little more stable but I've never had an issue with my wagon.

The mrs on the other hand opted for a Territory to tow her horse float as it's a bit more comfortable on the freeway.

I have done a fair bit of towing with my FG g6eturbo.

Trip to Phillip Island and back I got about 14ltrs per 100. I would say that the falcon is a very good option and never had an issue with the gearbox which has done 115k so far.

Most of my trips have been about 3hours one way to Wakefield with the exception of winton and Phillip island which I think was 10hours one way.

I've always towed with Falcon's including a couple of turbo's and they're awesome to tow with. The only thing they lack is weight to make towing a big load a little more stable...

yeah, awesome.

farking falcons again! lol

  • Like 1

If I had 100 g's I'd be towing with a new land cruiser or patrol but I don't so the Falcon's do it for me.

At the moment I'm in a 5.0L AU wagon on gas so it usually costs me about $30 to get to Winton from Melbourne towing my GTR on a 500kg+ trailer.

Ranger is still towing awesome! Done around 8500kms in the 2.5mths we have owned it and about 3000 of that has been towing lol...

Fuel economy is great, power is great and comfort is spot on! Best upgrade from the old 80!

  • Like 2

I'm sorry but the falcon is a shit option.

it has a performance cars gearbox in it that hates being loaded up extensively (like when pulling up a hill)

i did a trip with empty car trailer from Wollongong to Sydney, loaded a 33GTST on, then back to Wollongong. With the trailer and car on it wont hold over 80kmh uphills (on the freeway) and it will want to boil the atf. That trip i averaged 25L/100km. And remember, half of it the trailer was empty!

its definitely different on the flat, itll get up and cruise along, but the slightest hill and youre gone and i don't know that many freeways in aus that are perfectly flat.

oh and 115k kms isn't many kays on an FG. ;)

I'm sorry but the falcon is a shit option.

it has a performance cars gearbox in it that hates being loaded up extensively (like when pulling up a hill)

i did a trip with empty car trailer from Wollongong to Sydney, loaded a 33GTST on, then back to Wollongong. With the trailer and car on it wont hold over 80kmh uphills (on the freeway) and it will want to boil the atf. That trip i averaged 25L/100km. And remember, half of it the trailer was empty!

its definitely different on the flat, itll get up and cruise along, but the slightest hill and youre gone and i don't know that many freeways in aus that are perfectly flat.

oh and 115k kms isn't many kays on an FG. ;)

Yeah I would have to say that heading up the big hill coming out of the gong is a struggle for any car.

Up mooney mooney I can sit on 100 if I really want to but I usually do about 80 to 90 up the hill.

got to love the falcon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...