Jump to content
SAU Community

Recommended Posts

Calder October 10, 2003

NIZPRO BA XR6 TURBO LETS LOOSE with an 11.73 At 125.90 mph.

Nizpro debuted their Acid Rush BA XR6 Turbo sedan at Calder Raceway on October 10, 2003 intent on some ‘shake down’ passes, noting that Nizpro staff were specifically interested in data logging to ensure that whatever changes that may be required, could be easily implemented in the future.

Vehicle modifications consist of Nizpro’s Stage One XRT300 power-up kit (custom powder coated high-flow CNC machined inlet manifold, cast alloy thermostat housing, powder coated cast alloy rocker cover, cast alloy 100mm inlet tube, K&N pod filter, cold air-box, high-flow tube and fin intercooler with lightweight aluminium end tanks, compact dry-cell Odyssey battery and battery box), along with upgraded fuel injectors, and a MoTeC M800 ECU.

For a 4-litre Ford engine that is surprisingly close to stock internally to deliver a potent 426 kilowatts through the wheels on a DynoLogic chassis dynamometer, Nizpro had also to replace the restrictive catalytic converter (in an otherwise factory exhaust system), along with a high-flow fuel pump replacing the factory item.

245mm wide Nitto road/race tyres were also fitted to an otherwise stock vehicle (including the factory turbocharger) that weighed in at 3918 pounds at an independent weight station.

Traction proved a problem, as did the diff ratio that resulted in the Falcon hitting the factory imposed 5700rpm rev limiter by Calder’s 1100-foot mark. However the Nizpro team were quite happy with the information provided by the data logging, and also drove away happy with the knowledge that they had just set the fastest ever time for a BA Falcon Turbo with a respectable 11.73 @ 125.90 mph.

Nizpro’s Simon Gishus stated that having established a base line, and become aware of all potential problems, that he will make specific modifications to ensure the vehicle meets or at least goes close to meeting its potential at the next outing.

Using the traditional Drag Racing formula (speed over mass over distance), it showed that wheel spin and hitting the rev limit had resulted in a loss of approximately 3-4 mph off the terminal speed, with the top end charge indicative of a run perfect 10.6 second pass.

Note: Further information on Nizpro’s Acid Rush sedan, their heavily improved BA XR6 Ute, or on any of the Nizpro XR6 Turbo power up kits; Contact Nizpro on 03-9761 1522.

Link to comment
https://www.sau.com.au/forums/topic/27273-nizpro-xr6t-into-the-11s/
Share on other sites

Its good to see that that car is able to make that sort of power with that little development thus far.

Its alos interesting to note that the underated gearbox has lived and shows it potential. it will just be interesting to see just how long it will live.....

If i see an XR6T come at auctions that has been rear ended, then i can see a FORD powered 240Z sitting in my driveway.

Nizpro do good work, friends 200SX engine setup is courtesy fo them and it definitley performs.

Im assuming it was an auto... its scary the potential of some company cars

Awesome!!!

Was only a matter of time before someone put an XR6T into the 11s! Congrats to Nizpro.

Was just reading before in the latest ZOOM that they have their XR6T up to 260rwkw with way more to go.

APS have theirs up to 511hp@fly and SHV have theirs at 400kw at the flywheel..... impressive figures.

This is what separates the Japanese sports cars with the Aussie built performance cars. The Ford XR6 Turbo "Barra" project was undertaken with a very small budget in the hope to boost (no pun intended) some showroom sales against the popular Commodore SS's....

...and this shows, no money was spent on the R&D for a stronger driveline. Ford are STILL using Borg Warner hardware. A T5 manual gearbox, BTR auto's and weak BW 2 pinion diffs. It's great to see that people like Chiptorque, Nizpro, CAPA and others are making impressive numbers on both the dyno and track by defeating the ECU's abuse/protection modes, but it's a shame the weak drivelines let these cars down.

Originally posted by HSVKLR

SHV have theirs at 400kw at the flywheel..... impressive figures.

Hahaha. SHV. Shit-House Vehicles. Don't believe a word they say. Driven their purple ute and it's a pile of shit. An NA R32 GTS-t running on 3 cylinders would flog it and that's before you get to the woeful interior quality, horse-and-cart ride, non-existent brakes, etc etc

Originally posted by Sonic

An SP20. It's a daily driver for insurance purposes as a 1966 Skyline ain't the most comfy car to trundle freeways in (damn no air con, p/steer, etc). Seeing as the Skyline bit the dust, the Mazda is also doubling as weekend play-thing

LOL that the car my gfriend has!!

when u gonna own a real car?? :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...