Jump to content
SAU Community

Recommended Posts

I didn't know that they came standard or an option on the M35's - I know the C34's never had them

the only thing I heard about cruise control on the M35 was that Chris Rogers was installing a aftermarket system in a M35 and needed a M35 to be a test mule

I have factory cruise and the radar sits just under the front grill. It works really well even when you are following a car and it slows down in front to a stop. The computer puts my brakes on and nearly stops the car. The only thing i hate about the inteligence is that if a car pulls in front of you your car slows down and it takes a while to pick up again depending on the distance set

Nagoya Motors had a blue RS with factory cruise....

Would have been perfect if it had been fitted on my AR-X. And because of my Momo steering wheel, I cannot use Chris' solution.. Buttons won't fit...

Need cruise... if only to improve the fuel consumption..

A mate of mine is about to buy an ARX with Cruise along with just about every other conceivable option.

Will be quite cool to play with it.

It will be interesting to see how it keeps the car at highway speed as I find that the car can be a little surgy on cruise.

When you look at the grill the radar is in the centre of the grill in shield like shape getting narrow at the bottom and is a dark colour. The Nissan badge sits on top of the radar pannel.

I have seen a few of them here but they are rare.

A mate of mine is about to buy an ARX with Cruise along with just about every other conceivable option.

Will be quite cool to play with it.

It will be interesting to see how it keeps the car at highway speed as I find that the car can be a little surgy on cruise.

When you look at the grill the radar is in the centre of the grill in shield like shape getting narrow at the bottom and is a dark colour. The Nissan badge sits on top of the radar pannel.

I have seen a few of them here but they are rare.

After doing s few stints on country highways, I decided that cruise is a good thing to have, especially when my good old 350 had cruise and it was the best device to use compared to other cars i've tried. So I take it that the Stag cruise should be cool to use with that added radar at the front to sense cars ahead.

Yes I know it doesnt look too good but shit is it useful to have sometimes.

Andy, when is your mate getting his Stag? I wouldnt mind checking out his car and all the options as I'm going to buy another one from Japan asap.

eugene the factory cruise cant be installed onto one that didnt get it from factory. which sucks.........

but i agree it would be awesome to have :D

Hey Iain yes I know you cant install it, that's why I mentioned that i'm going to look for another car in Japan and sell my one.

easy. fly me down hand $900 + plane ticekt and you'll have OEM style cruise that DOES NOT surge.

the mule car I did finalised the cruise cal for my unit and it works a treat.

you didn't mention where you were but if its in a major city there's a good chance I can send you to a shop and get it fitted.

stuff getting a OEM car with it - waste of money when you have a car already that runs fine.

Yo Chris thanks for the offer. Can u give me more info on it. The aftermarket kits I've seen around I'm not too impressed with, but if yours is good and works better, I will take you up on it. I've got a lot of time off work so can come around to you down south( I think that's where you were last time here in syd)

find the user MILLOS on here. he had one doen by me yesterday. same setup that will go into yours.

in short its a driveby wire unit spec'd by me to work with these cars. it uses the OEM V35 buttons to get the controls onthe wheel and from there looks stock.

feel wise you wont notice it kick in and it works like any other cruise int hat respect.

to date I haev done 30+ of them without hassle..

if you want real feedback on them pop a question up inthe V35 area for the NEW DBW version of cruise that I do. the last one I did was VAC based and worked well but took too much stuffing around to fit properly.

as i said I'm heading down that way debug a car in blacktown so Ican do yours then in fact I can probably do it onthe back half of that day if youare keen.

Andy, when is your mate getting his Stag? I wouldnt mind checking out his car and all the options as I'm going to buy another one from Japan asap.

I think he will get it in about a week. Still the be confirmed but see if we can help a show once received.

Cheers

Andy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...