Jump to content
SAU Community

Recommended Posts

http://www.gtplanet.net/gran-turismo-5-to-...iple-platforms/

is what the guy was quoted as saying

i hope it does.. i haven't played a gt since gt1/2, didn't like 3 or 4 much, but will like this just cos it looks so nice

even a port i can live with, not all ports are shit but atm.. theres just no good racing games on pc, grid was probably most fun i've had on a racing game and the physics in it were just demented

Link to comment
https://www.sau.com.au/forums/topic/274780-gt5-is-ready/#findComment-4658477
Share on other sites

lol pcfag.

You neglected to mention that games are often much better optimised for consoles due to having the same hardware; and thus better hardware utilisation than a PC.

Most games that I've played recently on 360 aren't too much different to their PC counterparts, though I guess this is also due to a lot of games being given a multi platform release now as well. (the other thing being that you don't get the same exclusive downloadable content on PC!)

The last good PC car game I played was NFS High Stakes.

My best mate and I played GT4 again and then the GT5 Prologue the other week, It kinda felt well... boring, apart from the fact that we could race a GTS-R vs R32 GT-R in GT4 :D

I'll be hanging out for the new NFS title which is supposedly a return to the more simulation based type of NFS.

Link to comment
https://www.sau.com.au/forums/topic/274780-gt5-is-ready/#findComment-4659286
Share on other sites

lol pcfag.

You neglected to mention that games are often much better optimised for consoles due to having the same hardware; and thus better hardware utilisation than a PC.

Most games that I've played recently on 360 aren't too much different to their PC counterparts, though I guess this is also due to a lot of games being given a multi platform release now as well.

:)

They have to be optimised, its different hardware - and limited at that.

Whilst they might use the hardware better - the single reason is that when ported to PC you'll never have them use a PC hardware properly because they are not coded as such... you kind of countered your own point.

games written for PC's rock - always have, there are just less off them these days :)

Link to comment
https://www.sau.com.au/forums/topic/274780-gt5-is-ready/#findComment-4659887
Share on other sites

Whilst direct ports from console to PC are often shite, as opposed to a game developed for multiple platforms in paralell, I'm starting to see less and less of a gap between Xbox games and PC.

A case in point - Fallout 3 ran like a dog with no legs on my Centrino Duo 6550, 2GB RAM and 8400GS. I swap out the 8400GS for an 8600GT I got for very cheap and I can now have it playable in full screen not letterboxed (!!!) but bodies still disappear when more than 10m away. Whereas I can have the exact same game experience albeit smoothly on the 360. That was my watershed moment with computer games.

I don't think I'll be bothering to upgrade again in the near future due to this fact.

I'm also someone who during the 90s and early 00's was a vehement opponent of consoles in general. PSone games struggled to keep me entertained for >5min with about 4 exceptions, and N64 etc never grabbed me. The gaming world has changed since then though.

Slightly more on topic, I'm lucky in that a mate bought a PS3 for the sole purpose of GT5, because I sure wouldnt! :P

Link to comment
https://www.sau.com.au/forums/topic/274780-gt5-is-ready/#findComment-4660578
Share on other sites

Whilst direct ports from console to PC are often shite, as opposed to a game developed for multiple platforms in paralell, I'm starting to see less and less of a gap between Xbox games and PC.

A case in point - Fallout 3 ran like a dog with no legs on my Centrino Duo 6550, 2GB RAM and 8400GS. I swap out the 8400GS for an 8600GT I got for very cheap and I can now have it playable in full screen not letterboxed (!!!) but bodies still disappear when more than 10m away. Whereas I can have the exact same game experience albeit smoothly on the 360. That was my watershed moment with computer games.

I don't think I'll be bothering to upgrade again in the near future due to this fact.

I'm also someone who during the 90s and early 00's was a vehement opponent of consoles in general. PSone games struggled to keep me entertained for >5min with about 4 exceptions, and N64 etc never grabbed me. The gaming world has changed since then though.

Slightly more on topic, I'm lucky in that a mate bought a PS3 for the sole purpose of GT5, because I sure wouldnt! :blink:

Exactly what I'll be doing :P

Link to comment
https://www.sau.com.au/forums/topic/274780-gt5-is-ready/#findComment-4660628
Share on other sites

YAY for GT5, ill be an old man before it comes out, but im used to that waiting for GT and GTA games.

ports are pretty crap atm, you need an uber PC to run GTA4 anything like the PS3 can (unless you turn down traffic and m,ake the game easier)

ive loved all the GT games, except GT4 prologue it was kinda lame. GT5 prolgue is a bit better cause of the online racing, but the full game should be asolutely mental with the number of cars and tracks, and then UPGRADES!!! yay cant wait, thanks for the reminder guys, now i can go dream about it again

Link to comment
https://www.sau.com.au/forums/topic/274780-gt5-is-ready/#findComment-4675355
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...