Jump to content
SAU Community

Recommended Posts

hi guys i need your help with this 1...im planning to do a vinyl trim on my door insert....just wondering what is the best way to take that grey fabric off...dunno the proper name for it lol....do i just force it out coz i dont see no clippines or screw... thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/277144-r34-gt-door-insert-trim/
Share on other sites

yeah i did took off the door insert of the car...no clips no screw....i had to rip the cotton fabric off...lol..kinda scary at first but all good now...i'll post some pics tmorrow once i finish the second door....cheers...

i took my door trim off yesterday. I see what you mean by no clips, its just tucked into a grove in the trim. How did you get it in the grove? did you use a screw driver or something similar?

...Yeah flat head screw driver..n when i bought my heatgun it cam with 10 pieces of tools...tools for shaping the vinyl into grove.....HEATGUN is the best tools to use coz you can manipulate the fabric when its warn n easy tucked in....TAKE YOUR TIME... pic will be on tomorow coz i got a shittt cam...its not a pro job but im pleased with it...show me pics of yours too...cheers///\\]

theres a DIY leather retrim kit on ebay. i think it covers this part of the car too. they might give instructions on how to remove/install etc. just search leather or something similar under the car section

  • 2 months later...

Rather than starting a new thread i figure ill dig up this old one, does anyone know, how to properly re-trim the R34 door inserts/trim piece

Going on the above, the old material needs to just be ripped out basically and the new stuff tucked into the trim piece.

That said, how would you get the new vinyl/material, to stick to the curves of the door plastic? glue perhaps?

i re trimmed my doors in white.. fabric as stated above just rips out (some glue holding it on) and then i used vinyl flooring adhesive LOL and works a trick, never had problems and you just brush it on so doesnt get everywhere you don't want it to

just did mine this weekend on my GTT, in black suede with metalized embroidered logo for shows

fronts will be carbon fiber bottoms and panels, suede inserts.... factory top bits , customized to hold 4 speakers in each door, in a sealed box

bit odd how nissan didnt make that part come off but instead glued the cloth in the groove??? most other cars are stuck on with screws or melted on plugs etc.

yeah i'm lazy and left em on.. it's a five min process really.. just rip off the original fabric.. use it to trace around on your new fabric (best is to trace on the back so no border is left, i used white so everything shows at front) then just apply the glue and stick away..

i used a small brush to carefully apply the glue in the fold and then a flat head screwdriver to insert new material down the fold.. then a cloth for any excess that may have come out from over zelous application of the glue :P

Thanks for the answers guys,

Sapphire - care to share some pics :D

sure but no laughing..lol post them up later today

hint the glue and old stuff comes right off without drama, just soak it in wax and grease remover first. better then screw driver scraping.

and wont damage the plastic if rinsed off after with water then dried , after your done put on some new interior protector to get rid of the dull look after using above methods.

use with care disclaimer. Becareful wax and grease cleaner can kill some plastics and cloth. but in most cases wont on door trims and seats.

and will dry your skin out till it cracks and bleeds. so use latex gloves .

PS take the panels off to do them right. !!!

yeah i'm lazy and left em on.. it's a five min process really.. just rip off the original fabric.. use it to trace around on your new fabric (best is to trace on the back so no border is left, i used white so everything shows at front) then just apply the glue and stick away..

i used a small brush to carefully apply the glue in the fold and then a flat head screwdriver to insert new material down the fold.. then a cloth for any excess that may have come out from over zelous application of the glue :D

lol, you too should post up some pics, interested to see this job you did!

sure but no laughing..lol post them up later today

hint the glue and old stuff comes right off without drama, just soak it in wax and grease remover first. better then screw driver scraping.

and wont damage the plastic if rinsed off after with water then dried , after your done put on some new interior protector to get rid of the dull look after using above methods.

use with care disclaimer. Becareful wax and grease cleaner can kill some plastics and cloth. but in most cases wont on door trims and seats.

and will dry your skin out till it cracks and bleeds. so use latex gloves .

PS take the panels off to do them right. !!!

Come to think of it, it probably would be a good idea to take the door skins off to do it so that you can pop the window controls out and get the fabric right in behind there

i'll see if i can take some pics.. no need to soak in anything.. once you lift a bit of it the rest comes straight out..

and to get behind my controls i just tucked that bit in and the controls hold that piece tight

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...