Jump to content
SAU Community

Recommended Posts

I'd simply repair the head and slap a good piston and rod assy out of the other engine into it after a light hone. Unless it has actually damaged the bore to a point you need to bore it? If the latter I'd just junk it and start again.

Forgies aren't worth the expence, you're not near the limit of the stock gear yet.

I can take some. It was pretty easy, on the back of the pump there is 6-10 big phillips head screws. use an impact driver to get them off, cover lifts off, gears slip out easy, put some vasoline on the new ones and slip them in. Loctite, and impact driver the cover back on.

he pressure was 110psi, as it was just running a normal N1 releaf spring. I will enlarge the oil restricers, and drop the pressure back to 65-75psi with the new engine.

Edited by sav man
  • Like 1
  • 2 months later...

Wrong heat range plugs, tip fell off and went through the engine. But after I pulled it down, it was apparent it was a time bomb. The machinest didn't seat the valves properly, and some were leaking, and the Bearings were very warn. Looks like it was a very high km engine

Wrong heat range plugs, tip fell off and went through the engine. But after I pulled it down, it was apparent it was a time bomb. The machinest didn't seat the valves properly, and some were leaking, and the Bearings were very warn. Looks like it was a very high race km NISMO engine

e85 all the way. Yep I got some of that good VHT alloy in a can, it's now super light. Why people paint their blocks black is beond me, it's 1000x easier to work on a light engine, cause you can see what your doing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...