Jump to content
SAU Community

Recommended Posts

definately not a holinger, or a sequential, cost way to much money. They are weaker than Straight cut dog box, because they are helical cut dog engagment,

but yes the next option would be a liberty, but at the moment I want to keep it like a streeter for a bit longer haha

All other things being equal helical gears are significantly stronger...

That last pic looks like it almost has the front wheels off the ground

..what a car :)

The way the car was launching it felt like the wheels where coming off the ground :) the suspension is working exceptionally well and cannot complain with 1.35 and 1.36 60foot times, I think with a little bit more launch HP I could get it down to a 1.25-1.30 maybe.

i can never get enough of this white ghost :) - surely u have a nickname for this car?

good video compilation

Havent got a nickname yet, maybe people will have to give me ideas...

OS giken Samwage plate turned up yesterday, just gota get the new parts for the gearbox and its ready to go back together :)

Good stuff!

Where did you get it from and what price did you get it for? (PM if you like). It's a heavy fooker!

Give me a yell if you guys need a hand with anything. I'm stuck on my project... Waiting on the motor to get here.

I don't think you would handle the pressure in our shed, a lot of F this, F that, your a Fing Fhead, tools get thrown, people storm out, 2 many chiefs and not enough Indians, a lot of head butting going on.

I always offer to help you out, Callan... I think. :S

That doesn't bother me, man. I'm a Splicer/Fabricator. Sounds like a normal day at work. Haha.

Nah I just wait till your hungover/tired before i want you to do anything haha :P

Good stuff!

Where did you get it from and what price did you get it for? (PM if you like). It's a heavy fooker!

Umm bought it from some fella off SAU, 2nd hand for $600. It's definitely a lot stronger than standard.

  • 2 weeks later...

Hi Guys,

My titanium tubing, round bar and V band rings have arrived. Just need to buy a cold saw and start fabricating my exhaust :)

4 Inch exhaust tubing

154293_4910511367727_548563515_n.jpg

2 Inch tubing for screamer pipe

576522_4910513967792_1870002915_n.jpg

14198_4910515367827_1597064001_n.jpg\

titanium 8mm round bar for exhaust stays, 25mm round bar to turn out exhaust fittings for AFR and EGT's, and a bundle of TIG wire.

398181_4910515727836_563998228_n.jpg

561792_4910516487855_213278054_n.jpg

Titanium 4" V band exhaust ring ( worth a shit load )

156606_4910517127871_1537168308_n.jpg

44mm Tial Wastegate V band ring, keep for drift car screamer pipe.

404214_4910517447879_1834705976_n.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...