Jump to content
SAU Community

Recommended Posts

Some say Vspec 2 some say Aus model. I'm going to drive the car as my daily if I get one so I won't be babying it too much. Is the potential increase in value of the Aus ones worth the extra cost. Only one I've seen advertised has 180XXXkms and is $38K or so.

Do V spec 2 32's have steel turbines or am I dreaming?

Are all imports wound back? It seems ridiculous that a 1993 would only have 49000kms on the clock.

Edited by Barge Ass
Link to comment
https://www.sau.com.au/forums/topic/284162-what-r32-gtr-is-most-worthwhile/
Share on other sites

I guess V-Spec II's and ADM R32 GTR's hold there own value in their own way.

V-Spec II's hold value because there was only 1,303 (Approx) which were made and becoming a collectors item.

ADM R32 GTR's hold value due to only being a limited of 100 cars delivered to local Nissan Dealers + I usually see the ADM R32 GTR's in stock condition / unmodified, which means it can hold a bigger value.

Standard R32 GTR's, Nismo Edition's, V-Spec's and V-Spec II's all came with ceramic internals for their Turbo's.

Only the R32 GTR N1's came with steel turbines.

It is hard to tell about the Km's, best way to tell is by seeing if the Speedo is the factory 180km/h speedo as thats what all Japanese cars came out with at the time.

Also check the condition of the car in and out and the engine.

1993 model R32 GTR with 49000km's on the clock... That's about a 16 year old car which would have done an average of 3062.5 km's per year, probably driven about 255km's per month and about 63km's per week... I would say it is a weekend car.

But the condition of the car in and out and the engine will tell if it is legit or not.

Agree for a daily just get a clean example of a regular GTR.

If you get something more unique, the fact that you'll be putting on decent k's and driving it everyday will reduce it's value.

I'd also suggest to look at cars that have ahd recent engine rebuilds as you'll find a lot of people fork out for a rebuild and then can no longer afford the car. Meaning there are some awesome bargains out there.

Re k's on the clock my view is if it can be proved then believe it if not don't. My 92 has just hit 60000k's but i have a continuos service record for the car, and the condition also suggests it true.

^when are you selling again?

Go for the cleanest unit you can find, leave it stock and enjoy for what it is.

For ADM GTR's I understand that of the 100 around 30 went into racing and 70 made it on the road.

The Vspec 2's are a lovely unit but they are going up in price now, good time to get on board.

All of the above >_< I'm writing an article for HPI about it as we speak. If a "dealer" can sell a freshly imported low km car here in Australia $5K cheaper than what I could import one from Japan at basic cost price, what does that tell you?

Some say Vspec 2 some say Aus model. I'm going to drive the car as my daily if I get one so I won't be babying it too much. Is the potential increase in value of the Aus ones worth the extra cost. Only one I've seen advertised has 180XXXkms and is $38K or so.

Do V spec 2 32's have steel turbines or am I dreaming?

Are all imports wound back? It seems ridiculous that a 1993 would only have 49000kms on the clock.

This one sold just recently too. It was a fairly modified high km car too.

Whats the difference between ADM and JDM 32s which made them higher priced, other than its local?

Hey Kristian. A bit off topic but hows the rare skyline registry going?

There were 115 changes made from the Jap version to ADM car. Their higher price can be attributed to a few things but mainly its the rarity of the vehicle.

That and the whole bathurst, atcc thing.

Agree for a daily just get a clean example of a regular GTR.

If you get something more unique, the fact that you'll be putting on decent k's and driving it everyday will reduce it's value.

I'd also suggest to look at cars that have ahd recent engine rebuilds as you'll find a lot of people fork out for a rebuild and then can no longer afford the car. Meaning there are some awesome bargains out there.

Re k's on the clock my view is if it can be proved then believe it if not don't. My 92 has just hit 60000k's but i have a continuos service record for the car, and the condition also suggests it true.

exactly these days I would only pay a premium for low kms if the car has service records FROM NEW to back it up. otherwise I can almost guarantee it's bullshit. no one who has a 20 year old car that's been through say 5 owners and all those owners only drove it 50km a week would 'lose' the records for it. the only reason people lost service records is to hide a cars true kms.

these days a 32 GTR is worth anything from $15K to $60K and there is a big difference between them. All I can tell you is that the smart buyer gets what they pay for. and that includes the bloke paying the $60K....

You should be getting a fairly decent unit for that sort of coin. While the yen is not spectacular at the moment it might be time to think about importing. Check with Chef on whats available, GTR's are coming up at auction all the time.

Things to check when you buy are the usual wear on steering when and pedals, do they match up to the k's on the odo? Also get a breaker bar and check the bottom pully, crank end float is not good. Comp test is must do.

I planned on getting a StateRoads inspector to look if its interstate and a mechanic mate/relative if in Vic. Anyway I plan on taking my time and educating myself and may not buy until late this year to early next year. I definitely need something reliable so am prepared to pay good money for the right example. Probably just go for a later model run of the mill GTR with as low genuine kms as I can get, preferably bone stock or with some basic mods.

Really appreciate the answers and info.

Edited by Barge Ass

a good condition 1994 model is great too, having the r33 gtr engine from the factory

but again you have to get it checked out to be sure its in good mechanical condition, but you would do this with every car u buy :rolleyes:

All of the above :yes: I'm writing an article for HPI about it as we speak. If a "dealer" can sell a freshly imported low km car here in Australia $5K cheaper than what I could import one from Japan at basic cost price, what does that tell you?

Yep, km readings to be taken with a grain of salt. I discovered mine has had 45,000kms wiped off it. The condition is still great, however. So judge each car on its own merits. It also gives R32 GTRs an unfair 'unreliable' tag as people look at the kms travelled when the engine fails.

exactly these days I would only pay a premium for low kms if the car has service records FROM NEW to back it up. otherwise I can almost guarantee it's bullshit. no one who has a 20 year old car that's been through say 5 owners and all those owners only drove it 50km a week would 'lose' the records for it. the only reason people lost service records is to hide a cars true kms.

these days a 32 GTR is worth anything from $15K to $60K and there is a big difference between them. All I can tell you is that the smart buyer gets what they pay for. and that includes the bloke paying the $60K....

Again, bingo. My car is only a neat and relatively cheap (yet expensive LOL) daily so I'm happy as it is. I would recommend doing the same.

Bolded word for truth. Some people pay a premium for a car when it simply isn't worth it. My car was something of a bit of 'mixed bag' and risk, which ended up reflecting its intial purchase price. Very happy though. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around with a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
    • Yep, this bit another local owner. I caught it before putting the transmission back into the car, what I noticed was the pressure plate fingers weren't flat and even. It's more obvious with the pull style clutch because the throwout bearing ring was visibly not flat once everything is put together. Nismo should really update their instructions to call out this specific detail. I'm not even sure the clutch as-shipped orients everything properly.
×
×
  • Create New...