Jump to content
SAU Community

Recommended Posts

  • Replies 158
  • Created
  • Last Reply

Top Posters In This Topic

Sounds like this is a common thing with plugs ins.

The computer needs a throttle signal as an input to decide what to do with the diff.

The A-LSD computer probably expects a signal to come to it in a particular way, and if it doesn't come in the correct form, then it faults.

So how should we fix the signal? I've had a mechanic check the wires, and he didn't see any issues... :(

OFENSV - yeah...mine doesn't come on when i first turn on the car...and it goes away if the car is turned off for awhile! The a-lsd light on the dash is not the one that flashes a signal. The flashing signal is on the a-lsd/abs computer in the boot. Don't know how to describe it, but it sits above the battery...you have to lean into the boot and look at the bottom of the computer...there will be a little round light that flashes out a sequence. (mine flashed 7 times slowly, then 5 times fast, indicating a tps prob - i think you need to ask someone what the different sequences mean : )

I definitely think its linked in with the pfc, cause i never had that problem with my stock ecu....

  • 3 months later...

Just chanced to happen on this thread when surfing the forum.

Hope you gels got your problems sorted. I could barely understand much of the discussion. I only bought my car in May 2004, so am still on steep learning curve.

Mine is also an R33 active LSD model, built Feb 1994. I managed to track down an owners handbook in english. Its been helpful for the basics.

It says both activeLSD and slip lights (ABS light as well) come on with the ignition, but go out when engine is started. Slip light also comes on when losing rear traction (eg having fun in the wet, or doughies, or perhaps on ice/snow in Japan). Active LSD light (and ABS light) only comes on when driving if there is a system fault.

My car (now) does it exactly like in the manual. But mine is stock standard. Mucking around with electronic mods seems too scary too me.

Hope this is helpful to some active LSD owners.

cheers :(

Hey I don't have an Active LSD 33 but going back to your original qu Moanie I'm pretty sure that the PowerFC doesn't support the Active LSD - hence the lights coming on when the PowerFC is installed..

Nah. I've recently had a powerfc installed and I don't have any problems with it. My slip light and A-LSD/ABS lights are working fine. Not that I have tested them of course. :angel:

I seem to find that it creates a system fault when you are driving up an uneven driveway and one wheel spins but the other is off the ground? Or on a dyno. It comes up with a system fault. Not quite sure why, but my mechanic said it's fine :rofl:

Moanie/NismoGirl. A Q. if I may? Whats a power fc, or shouldn't I ask?

I used to have an FC holden (1959) in a former incarnation, but you wouldn't call that powerful - by today's standards. And I'm sure it's not the answer to my Q.

Hope you are making progress with problems. I have no further insights, beyond how the lights are supposed to work.

Initially, mine did have a problem. None of the ABS,slip, or active LSD lights ever came on. Under warranty, so dealer had problem for 3 weeks. Turned out it was a broken wire inside a plug somewhere. It was like these systems had been turned off with a switch.

Interesting that both ABS and slip/activeLSD systems both ran thru one wire. Seems to support earlier post that both these systems are run from the one computer??

Gazza49: Before you get flamed for your nOOb question. A PowerFC is a full stand-alone replacement ECU which plugs in where your normal Nissan ECU is which allows you to modify your fuel/ignition maps as well as a few other features, like rev limiter etc.

Obviously if you replace the standard ECU which is supposedly running all these bits and pieces like A-LSD etc, you come up with problems if the new computer (ECU) can't handle it.

You'll notice in my signature that i'm awaiting a PowerFC and this certainly doesn't mean i've got an FC holden on order :)

I've search around, checked all 490 odd pages of the r33 service manual and other sites and google. The diff is the same as the vpec gtr diff. If the problem doesn't occur when you use the stock ecu and it does with the powerfc then it must be something the power fc is doing. Not sure what. The service manaul for the r33 doesnt cover anything on the a-lsd or slip functions, it doesnt even mention them

nissan consult wont prove much help either it doesnt have any a-lsd loopback or realtime tests. Find someone else who has a a-lsd r33 and see if you can swap your "lsd" computer in the boot over as a test, but if that was the problem then youd have the same fault with your stock ecu

no idea

I totally agree!!! With all the trouble shooting we did, that had to be the only explanation!! and i haven't noticed any probs with my lsd.... so i'm trying not to stress too much!! I have an awesome mechanic and tuner... so if there was a problem, they'd have already found it by now!! :mad:

Thanks for everyones input!!!! Its always good to hear it coming from someone else :)

Gazza49: Before you get flamed for your nOOb question. A PowerFC is a full stand-alone replacement ECU which plugs in where your normal Nissan ECU is which allows you to modify your fuel/ignition maps as well as a few other features, like rev limiter etc.

Obviously if you replace the standard ECU which is supposedly running all these bits and pieces like A-LSD etc, you come up with problems if the new computer (ECU) can't handle it.

You'll notice in my signature that i'm awaiting a PowerFC and this certainly doesn't mean i've got an FC holden on order :mad:

What's a nOOb question? But ta for reply anyway.

The FC holden wasn't that bad when I think about it. Mine had a Repco super sports engine (but still a sideplate grey), twin carbs, extractors, 2 inch exhaust, fats (steel wheels), lowered suspension and a top speed of 84 MPH. My mates called it the ROCKET.

Is it to late to change your order?

  • 3 weeks later...

Hi Moanie

I have a series 2 with the slip/a-lsd option on my car also.

i was looking in to getting a PFC, and i did actually pose this question on the forums, as i did think about whether apexi would have thought of adding this option in to the PFC, since only few GTST's came with it (maybe the new model PFC have it???).

the responses i got was that the PFC DIDNT come with the inbuilt function to handle our diff (vspec GTR diff). i didnt end up getting PFC though, as im selling my car now, but if i did, i would have imagined i would of got the same 'problem' as you.

if the diff actually still works though, then you dont have much to worry about..

-Michael

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...