Jump to content
SAU Community

Recommended Posts

i just had my car tuned today and i was a little disappointed with its power figure

it has:

Unopened RB26

Power FC

RB20 AFM x2

Garrett 2860-5 x2

100mm front mount

adj cam sprockets (both)

bosch 044

sard 700cc inj

nismo fpr

CES dump pipes + 3' exhaust

Greddy Profec b spec 2

and it made 375rwhp at 16psi (about 280rwkw)

the tuner said the profec control unit shat itself, hence the single boost level, even tho it is brand new? WTF?

shouldn't these turbos put me around 325-375rwkw (433-500rwhp)???

i'm suspecting that the weakest link is the Afm's, but they should be able to handle more power than that

because i suspect that higher boost alone won't get me to my target power.

can someone offer some opinions on the matter?

other wise the only

Link to comment
https://www.sau.com.au/forums/topic/286087-rb26-2860-5-power-figure/
Share on other sites

he mentioned that this power figure was exactly what he was expecting.

was tuned at brisbane tuning and turbo, and he said after the first hundred GTR's he's tuned, it took the guess work out of the cam gears.

the exhaust is quiet, so that could be an insight.

reading thru the RB26 guide, there are a few cars around this power level with the same turbo's, boost, etc, but this level just doesn't sit well with me

cheers!

anyone else have any ideas?

so much was changed on the car at once

it could be anything

check the basics

ask the mechanic

ask another mechanic

check the dyno chart

check basic engine health and setup - base timing, basic sensors, base compression, base boost check etc

Just curious why you're using that Nismo FPR with the sard 700s, the injectors should be able to support 400kw no problem?

As for power loss, very strange, maybe the timing belt just jumped a tooth.. and what position was/is the CAS set to (the CAS thing shouldnt be an issue if the tuner was familiar with skylines)?

Seem's normal for the boost, slap it on another dyno and you might jump up on the figures. Also, what sort of tune has he done. If it's a stock 26 which is 15 years old that might have to be considered. What the other dudes mentioned might provide some better insight. If it drives well and feels better you should be sweet.

Edited by monga

could be a very tired motor?

i got 214 rwkw out of my RB26 with -5's and running 14psi on stock (ECU, Fuel pump and injectors) with only a full exhaust and pods.

then i had the motor rebuild and now am getting 250rwkw @ 13psi with the same bolt on's, just have had forged pistons put in, full race bearings, R33 crank, head has been recond, block bored, honed and hot washed.

so really it just came down to the fact that the car needed a little bit of a freshen up after 20 years

Brezza

Hey dude, I've got a 1993 R32 that i get tuned at John's, been going to him for a bit now and i think he's always been a straight up guy. He has done a lot of RB's, including his own 240Z conversion putting out 530rwhp with some custom turbos that i've also got on mine. I run a very similar setup to you (plus rebuild) but same afm's and pfc, so if you wanted to swap the afm's over to see if that makes a difference let me know. Can also pressure check you're inlet system for leaks (i found a few after upping the boost). i'm in Brissy (coorparoo) 0403 486 876 if you're interested

Andrew

Seems about right for 16psi through stock cams to me. stick some 260 degree cams and 18-20psi through, and add 100 to that number.

Seems about right, i had HKS 2530s and couldnt get any higher boost then 1.2bar (18psi)

Needed cams, bought tomei 260/260 and made a lot more power and no more boosting problems.. However, im not using RB20 afms, using z32s.

Cheers,

Gordon

You can add 100rwkw on stock cams as well and to make 380rwkw no drama's. Not required.

U'd need at least 22psi and a very aggressive tune to get that on stock cams IMO. Much better to have cams matched to the turbos rather than tryin to push the envelope of one and not the other.

well i'm going to powercruise next weekend, so i'll check it out on their dyno (but is usually really hot there)

i'm looking at a open exhaust for the event and i'll try to turn up the boost a little. hopefully that should give me an idea.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...