Jump to content
SAU Community

Recommended Posts

Hi, recently bought a N/A r33. Didn't come with an owners manual.

Just wondering if its ok to run the car with standard unleaded (91 Octane) or will this damage the car?

Filled it with premium (98 Octane) the first few fills and it drank a tank in less than 3 days, and i don't drive like a maniac at high revs either.

Its drinking the standard unleaded much more slowly which is good for the everyday driving i do and cheaper, but i just wanna know if this is ok for the car?

Thanks Justin

Link to comment
https://www.sau.com.au/forums/topic/286403-the-correct-fuel/
Share on other sites

Your car is built for a higher octane (100?). I would use at least 95

E10 is good, its cheap and should hold off those nasty noises - until you start winding up the timing that is. Even better, E85

Do a search for fuel consumption, plenty on here about possible causes i.e. sensors, filters etc.

one of my mates used 91 octane fuel on his skyline and the engine went bang later. higher octane fuel reduces the chances of detonation which is why i only use BP Ultimate 98RON( WA doesnt have Shell optimax grrr :P ) more expensive fuel but better than expensive repairs.

Edited by R33_NICK

I read somewhere that NA skylines were able to run on regular japanese fuel while the turbocharged versions ran on premium. Im pretty sure regular japanese fuel is 89 AKI which equates to around 94 octane so maybe try 95 octane? Keep in mind I know next to nothing about skylines so this may not be true

technically you shouldn't get any real difference in economy from regular to premium. the ecu reads how much air is going into the engine and puts in the set amount of fuel for that afm voltage and tps position. other things will affect economy much greater than the type of fuel. you don't just take into account what revs you are doing, but how far you push the accelerator down. someone flooring it but only reving to 3000rpm will use more fuel than someone who revs to 4000rpm but uses half the throttle percentage. also the O2 sensor controls the fuel economy at light throttle loads, so if that dies your economy goes bad. also if the thermostat is shot and your car takes for ever to come up to operating temp then you will get poor economy as well. or you could simply have a slightly dicky fuel gauge. then there is your driving environment. if you have to stop at traffic lights often then you will get poor economy compared to someone who drove the same trip but got a green light every time.

finally, you said that a tank was lasting you 3 days, but the more important information is: how many kms were you doing in those 3 days, and how many litres are you calling "a tank"? i have used a full tank of fuel in a day, but i also drove 600km on that tank.

finally, you said that a tank was lasting you 3 days, but the more important information is: how many kms were you doing in those 3 days, and how many litres are you calling "a tank"? i have used a full tank of fuel in a day, but i also drove 600km on that tank.

agreed, you could say you used 2 tanks in one day - but if u were driving from brisbane to sydney that would be understandable..

so more info pls?

i would however stick to bp ultimate or mobile 8000 buddy

98ftw :woot:

Edited by astrotristan2

to me if you can afford to own an import / modified car, you can afford to put 98 octane fuel in it at least! It just never ceases to piss me off that though the price for unleaded can vary up to 20cpl, ultimate etc hovers around the 1.38-1.45 mark constantly!

When I had my NA 33, I always put V-Power in it for about 1.5years and I went to sell it, after the buyer has put a deposit down, I just put in cheap normal unleaded.

And straight away, I could notice the difference, the car's responce is so much more laggy.

As for mileage, I find putting 98 in, can get me more k's than normal unleaded.

  • 3 months later...
to me if you can afford to own an import / modified car, you can afford to put 98 octane fuel in it at least! It just never ceases to piss me off that though the price for unleaded can vary up to 20cpl, ultimate etc hovers around the 1.38-1.45 mark constantly!

Like he said, if you can afford modified car u can afford 98 octane fuel

Shell V-Power ftw

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea that's a fair assumption. I'm presuming they call them solid lifters as they have no moving parts like hydro lifters. 
    • I believe you're confusing WMI with water injection. Looking at that graph, the 93aki+WMI car is making more power than C16 race gas. Boost juice, which is what I also run, is Snow Performances 50/50 premix. 
    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
×
×
  • Create New...