R34 Gtt Power Steering Pump

[SCR34M3R]

Hi guys wasnt sure where to post this

but almost finished putting a rb26 into my car, but gtr power steering pump has 3 connections on it and im pretty sure the r34 one has 2,

Is there a way to make it work or do i need a R34 one?

if i need a r34 one is there ne other pumps which fit?

Cheers

Justin

[Moodles2]

If it's an R32 power steering pump, its likely the extra connection for the hydraulic HICAS

[SCR34M3R]

can i block it off?

[R31Nismoid]

R32 is 2x the size of R33/R34

If this is the case - the rear chamber is just for the HICAS.

[s13_Skyline_inside]

yes you can block it off, but i'd recomend opening it up and taking the fins out of the rear part if your going to block it of, or you could use the rear part of the pump to pump the fluid through a transmission cooler if your planning on doing some track work

[s13_Skyline_inside]

a good way to block it off if you can find a proper blank for the high pressure outlet is to take the hose off, cut the hose off the fitting and weld up the hole in the fitting where the hose connected to.

[SCR34M3R]

thanks guys

[SCR34M3R]

well finally got car running, i blocked off rear port off, and connected the vacuum lines up from the r34 power steering lines.

When i start it up u can hear the pump working, then when u turn car off power steering fluid comes out of the cap on the reservoir.

Any one got some ideas how to fix this?

Cheers

Justin

[R31Nismoid]

You need to remove the vein inside the pump that feeds the rear.

Just disconnecting it isn't enough as internally the R32 pump is still moving the oil

[jase-r34]

Put less fluid in? lol

[MBS206]

Have you bled the power steering system?

[SCR34M3R]

yer forgot to remove the fins in the back of it, forgot all about it untill i re-read this forum.

cheers guys