Jump to content
SAU Community

Recommended Posts

see two posts back. if its a NATS key there will be a blue or red area at the base of it. have seen both used locally in the patrol. GTR was usually a separate fob

I have the red area at the base of the key, but I'm not sure if coding a new key would work as the car has an aftermarket alarm and I only have the remote for that alarm - so unsure if coding a new key would work with this??

if the car starts with that key then its coded to it. car WILL NOT start with an uncoded key. alarm will make no difference to that.

I meant more for coding a new key, with the steps outlined earlier

"1.get in the car and manually lock the door

2.insert the key in and out of the ignition switch 6 times,the doors will unlock by themselves

3.Insert the key without losing rythme and turn to acc,and relock dors manually,then push the button on the remote.

presto,you have a coded remote"

The only remote is the alarm remote, so would that be used to code the new key or is there meant to be some OEM remote for the car?

  • 7 months later...

I only got 1 r34gtr factory key and 1 remote when i bought my gtr. I wanted some spare keys so went to my local nissan and asked for the process of getting new keys and sold me 2 uncut new factory keys, that arrived a week later. I had to have them cut and brought it back to be programmed. When i brought the car in , they told me these cannot be programmed because it is an import, not even looking at the car. I then went to other nissan dealers who tried it in their consult but with no success.

Today I've started to ring a few automotive locksmiths, and only 1 guy said he might be able to do it, but will have to ring him at 5 pm and book an appointment.

How are you guys doing your spare keys?

Edited by M'ck'y
  • 1 month later...

Talking to Nissan Australia, they said that Nissan Capalaba can do this.

I called them and they seemed to think that they can.

I havent got a spare key cut yet or coded.

Just thought I would add this update.

Hope it helps people.

Here's a hot tip, do NOT go to Nissan at Lutwyche.

I gave them my car with a working NATS ecu and key ready to be programmed. I got the car back 2 days later, no consultation with there response that the NATS ECU was fried (They'd fried it) which was going to be $550 for a new item and a 2 week wait + 2 hours labor to change on top of the 7 hours labour @ $120 an hour they'd already done to diagnose this. When I declined they said I would need to pay the full $820 before they gave my car back.

A quick call to fair trading set them straight, but yeah... Don't ever go there!!!

  • 4 weeks later...

goodmorning guys.. i have a quick query regarding the key. you see.. my remote key buttons have been teared apart already due to wear and tear. would you happen to know where i can source the rubber button inside the remote key? or if the situation is worse than i expected then maybe the whole remote key case with the rubber button? im desperate. i cant seem to find that rubber anywhere here in the philippines.

  • 2 months later...

I put an untuned Power Fc in to make sure it works (and it does) and then wanted to put my standard one back in as the standard one felt a bit quicker.

It unmatched my key so I tried the procedure and it does at you say..6 times and the hazard light blinks but when I go to ACC and press lock...nothing.

Do you have to do the lot in 10s?

My hazards don't blink when I press lock in ACC.

Is there a set amount of time to code enable?

I put an untuned Power Fc in to make sure it works (and it does) and then wanted to put my standard one back in as the standard one felt a bit quicker.

It unmatched my key so I tried the procedure and it does at you say..6 times and the hazard light blinks but when I go to ACC and press lock...nothing.

Do you have to do the lot in 10s?

My hazards don't blink when I press lock in ACC.

Is there a set amount of time to code enable?

For anyone who wants a key cut and programmed the locksmith in Brisbane that i get to do all mine can do what ever key you have. Even NATS5. No need for an expensive nissan key and BCM code. PM me if you want his details, one key is $170-$180 or something and if you want more than one done or a group of you want them done then he may be able to offer cheaper prices. They wont have the central locking or boot release but will start ur car and having a backup is always best...

  • 1 year later...

Sorry to dig up an old post,

But does anyone know if any lock smiths or Nissan dealers in NSW that can program a NATS key?

From the above posts it seems some dealers won't do it.

Cheers,

Will

any nissan dealer that says they cant code the key needs a bloody bullet. Its a simple process and CAN be done via consult, provided you have a working key. You just clone the thing. I had to show the techs at nissan how to do it in gladstone because they are all 17 year old tradesmen with no clue. You can do it on some newer model scan tools as well such as the carman scan 5. If they say they cant do it, i wouldnt even trust them doing a service.

any nissan dealer that says they cant code the key needs a bloody bullet. Its a simple process and CAN be done via consult, provided you have a working key. You just clone the thing. I had to show the techs at nissan how to do it in gladstone because they are all 17 year old tradesmen with no clue. You can do it on some newer model scan tools as well such as the carman scan 5. If they say they cant do it, i wouldnt even trust them doing a service.

Thanks for your reply, i'll check a few nissan dealers out

  • 1 year later...

Once again i know its an old thread.

Just an update for those that are in NSW and would like to get a key cut and coded for the R34 GTR with out going to the dealers.

Mister Minit in Livepool Westfield can do this, they use another key made by SLCA.

Got mine done this afternoon and it works perfectly.

Not sure if most people will be happy on price but they charge $179.95 for supply of key, cut and coded.

The way i see it, its a small price to pay to have an extra key for a car worth 40k plus.

Hope this helps, pic of key attached

post-32402-0-50589400-1365839195_thumb.jpg

  • 3 weeks later...

Hi Guys,


Best guy in NSW is Daniel at Ultimate Locksmiths very very experienced.


He has a mobile service.


Terrible webpage but he is awesome with the key side ;D

http://www.ultimatelocksmiths.com

Kind Regards,

Daniel Gardener

Carbon Car Systems

  • 2 years later...
  • 4 months later...

Does this work for the r33 series 2 as I have a new remote key but can't program it to the car...(can't get the car into program mode for some stupid reason) and yes it has the black box behind the door panel (Receiver) it also has a cheap arse RHINO alarm fitted could this be the cause of my problem??? any help is greatly appreciated ...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...