Jump to content
SAU Community

Recommended Posts

At least people know where hes from :)

the police have pulled him over and he simply handed them his NSW licence, rego papers and passport. Due to the fact they probably cannot read english they let him go.

the police have pulled him over and he simply handed them his NSW licence, rego papers and passport. Due to the fact they probably cannot read english they let him go.

That's awesome :D I do the same thing all the time over here all the time. They see the round eye driving and figure it's to much hassle for them to get a translator and stuff so they just let most things slide.

I did get a ticket recently though for "parking" even though I was in the car with the engine running (along with a 2.8L GTR waiting behind me :P ) at 1am in the middle of nowhere on a long striaght road. I heard him say in japanese he was giving me a ticket over the radio, then he asked me if I spoke japanese in japanese. I just looked at him confused like and said "huh?". After 1.5hrs of waiting, the translator finally shows up and I start answering his questions in japanese. Boy was the original cop PISSED. I made him work for that ticket :D

This needed to be posted in Forced Induction why?

ill drop the penny for you Shane...the car has a turbo and is performing...so id say thats forced induction performance. Feel free to suggest what section is more fitting.

Guilt-Toy bought a Dyno Dynamics dyno, packed it and his car into a container and moved to Georgia to set up the countries only dyno tuning and performance workshop. Its a little known that he used to tune cars via the mobile phone network over there while in Aust. Linking into the cars ecu using two laptops linked via a mobile broadband connection. He has tuned circuit cars one of them went on to take out the national series over there. I think his business is called European Motorsport Engineering and has just finished tuning a WRX that is competing in the European Rally Championship.

Edited by DiRTgarage
ill drop the penny for you Shane...the car has a turbo and is performing...so id say thats forced induction performance. Feel free to suggest what section is more fitting.

Guilt-Toy bought a Dyno Dynamics dyno, packed it and his car into a container and moved to Georgia to set up the countries only dyno tuning and performance workshop. Its a little known that he used to tune cars via the mobile phone network over there while in Aust. Linking into the cars ecu using two laptops linked via a mobile broadband connection. He has tuned circuit cars one of them went on to take out the national series over there. I think his business is called European Motorsport Engineering and has just finished tuning a WRX that is competing in the European Rally Championship.

I dunno, maybe The Wasteland?

Why did he feel it was necessary to jump abroad and setup a tuning shop, if he is as good as he's made out to be he's expertise should have been muchly appreciated here in Aus and he would have done well.

Bodyform now guilt-toy, ur wanking hand must be pretty sore by now paul :P

I dunno, maybe The Wasteland?

Why did he feel it was necessary to jump abroad and setup a tuning shop, if he is as good as he's made out to be he's expertise should have been muchly appreciated here in Aus and he would have done well.

Bodyform now guilt-toy, ur wanking hand must be pretty sore by now paul :P

Because over there he doesnt have to put up with tools like you. Snap!

mods feel free to move to the appropriate section so Shane will stop sooking.

Edited by DiRTgarage

Its good to know the latest and I think its fine here, sorry ShaneFcan't understand why you'd whinge about something if you don't have or want anything to do with it, Guilt Toy took the time to help me out before and it was appreciated.

That's awesome :) I do the same thing all the time over here all the time. They see the round eye driving and figure it's to much hassle for them to get a translator and stuff so they just let most things slide.

I did get a ticket recently though for "parking" even though I was in the car with the engine running (along with a 2.8L GTR waiting behind me :D ) at 1am in the middle of nowhere on a long striaght road. I heard him say in japanese he was giving me a ticket over the radio, then he asked me if I spoke japanese in japanese. I just looked at him confused like and said "huh?". After 1.5hrs of waiting, the translator finally shows up and I start answering his questions in japanese. Boy was the original cop PISSED. I made him work for that ticket :)

lol Classic. Over here they'd probably try to find something else to make the ticket worse.

Guilt-Toy bought a Dyno Dynamics dyno, packed it and his car into a container and moved to Georgia to set up the countries only dyno tuning and performance workshop. Its a little known that he used to tune cars via the mobile phone network over there while in Aust. Linking into the cars ecu using two laptops linked via a mobile broadband connection. He has tuned circuit cars one of them went on to take out the national series over there. I think his business is called European Motorsport Engineering and has just finished tuning a WRX that is competing in the European Rally Championship.

haha thats mad!!!

Its good to know the latest and I think its fine here, sorry ShaneFcan't understand why you'd whinge about something if you don't have or want anything to do with it, Guilt Toy took the time to help me out before and it was appreciated.

its called taking the piss :D

Go the fanboys!

I better shut my mouth though, i dont want uncle nick giving me a kick in the butt again :D

next time he said he's going to gaff tape and take you analy...maybe its the best offer you have had all year. You refered to my wanking, but Shane considering your entry was denied in the Ipswich Bachelor of the Year id say its something you have a masters degree in.

please move to the wasteland so this can turn into another boob appreciation thread...and Guilt-Toy i wasnt refering to your man rack.

Edited by DiRTgarage
next time he said he's going to gaff tape and take you analy...maybe its the best offer you have had all year. You refered to my wanking, but Shane considering your entry was denied in the Ipswich Bachelor of the Year id say its something you have a masters degree in.

please move to the wasteland so this can turn into another boob appreciation thread...and Guilt-Toy i wasnt refering to your man rack.

im gonna take a punt and say u went to an all boys school hey pauly.

ur as bad as a $2 hooker, all they talk about is dicks dicks and dicks (so i've been told)

Bring on the boobs! :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...