Jump to content
SAU Community

Recommended Posts

Are the rotors really worth the extra in shipping? I plan to get slotted ones locally. U got s good price for them? I found eBay UK had cheaper prices.

Id ask Darren Spencer about rotors if there isnt a group buy for RDA's on here at the moment (I think I got into the last one).

OK the calipers arrived today.

A few scratches here and there which doesn't phase me...but THIS does:

See where I circled it...seems like the line was cut/snipped off.

Is this going to be an issue?

post-75595-0-63412400-1300410952_thumb.jpg

Edited by ironpaw

The banjo will work as well....just make sure you use the copper washers....not sure wether you will have restrictors in these but if you do you may have to remove them to get the banjo bolt in......get onto bbenny he'll be able to tell yah.....my brembo's are from an r33 gtr so the might be slightly different.

ok cos im bored and still not back at work yet.........

you guys are talking about a 324mm disc with a width of 30mm and the PCD is 5X114.3 correct ???

according to Dba there are 2 different overall heights that can be used (ie changing offset of the calliper - correct me if im wrong)

these 2 heights are: 49mm and 53.8 - now i cant see what car these 2 disc's come off, but im sure a quick call with the part numbers would sort that out.

actally its just easier to post my findings with a pic............................

post-83704-0-14622600-1300749344_thumb.png

ok cos im bored and still not back at work yet.........

you guys are talking about a 324mm disc with a width of 30mm and the PCD is 5X114.3 correct ???

according to Dba there are 2 different overall heights that can be used (ie changing offset of the calliper - correct me if im wrong)

these 2 heights are: 49mm and 53.8 - now i cant see what car these 2 disc's come off, but im sure a quick call with the part numbers would sort that out.

actally its just easier to post my findings with a pic............................

I'm pretty sure the 350z Brembo disc is the 49mm offset

ok cos im bored and still not back at work yet.........

you guys are talking about a 324mm disc with a width of 30mm and the PCD is 5X114.3 correct ???

according to Dba there are 2 different overall heights that can be used (ie changing offset of the calliper - correct me if im wrong)

these 2 heights are: 49mm and 53.8 - now i cant see what car these 2 disc's come off, but im sure a quick call with the part numbers would sort that out.

actally its just easier to post my findings with a pic............................

they only 30mm thick!!!!...didn't know that....Glad I went with the R33 GTR brembo's and rotors ones.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...