Jump to content
SAU Community

Recommended Posts

Hi

Need to size a turbo and injectors for my RB25 R33

i want to use it for drifting so it should be responsive

car already has :

- Hybrid FMI

- Full 3" zorst

- splitfire coils

- pod and CAI

- tomei fuel pump

- nismo FPR

- HKS EVC5 boost controller

have just brought a Power FC and am going to get this fitted along with Z32, new turbo and injectors.

would like to keep standard turbo manifold and use the 3" dump pipe already fitted

would like about 350hp @ wheels or more

have budgeted about $1000 for injectors and $1000 secondhand to $2000 new for the turbo

so my questions are:

- What turbo

- what injectors

- also can i keep the cold start function with a Power FC

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

if you want to keep the dump you have with the standard turbo then your best bet is a highflow, which should also be sufficient for your 350hp goal.

injectors, different people have different opinions but i'm using nismo 555s and they're great

and yes power fc's have cold start functions

if you want to keep the dump you have with the standard turbo then your best bet is a highflow, which should also be sufficient for your 350hp goal.

i thought alot of aftermarket turbo fit in place of the standard one without changing anything

for $1800 we can make you a Garrett GT3071R BB CHRA in a .63 Bolton housing in .60 A/R Comp with 14psi internal gated actuator. that would be pretty responsive for your power goal with good torque.

GCG highflow, Nismo 740cc injectors to give you breathing room for future upgrades(same price as the 555cc), 480cc SR20 injectors are the budget option.

a GT3071 or 76 kit is ~3k

for $1800 we can make you a Garrett GT3071R BB CHRA in a .63 Bolton housing in .60 A/R Comp with 14psi internal gated actuator. that would be pretty responsive for your power goal with good torque.

Sounds like a good option, but have heard many times of the potential boost control issues with these combos, do your setups have this issue?

i thought alot of aftermarket turbo fit in place of the standard one without changing anything

some of the hks ones do but they cost a small fortune

all the others i can think of are a highflow of some sort

if you want 350hp u may run into boost control issues as said above, when running the stock manifold, your going to have decide as to how serious you want to be about your up grade, do you either get the bolt on and run into a wall when ur after more, or spend the extra couple of grand and go external gate, 6boost manifold, and a decent garret turbo. why not get some cams and timing gears as well.....etc

its a pretty hard choice and decent investment what ever you decide on think about what your going to do with the car spend the extra now and save the head ache latter

......

Sounds like a good option, but have heard many times of the potential boost control issues with these combos, do your setups have this issue?

Nope. Depends on how your engineer the internal wastegate port and size of the wastegating flap. We've done quite a few. No problem with boost creeping at all.

if you want 350hp u may run into boost control issues as said above, when running the stock manifold, your going to have decide as to how serious you want to be about your up grade, do you either get the bolt on and run into a wall when ur after more, or spend the extra couple of grand and go external gate, 6boost manifold, and a decent garret turbo. why not get some cams and timing gears as well.....etc

am not gonna have the extra money external gate and cams

I see heaps of people with 350rwhp using the standard manifold and think i should be able to do it

hks2835...shits on standard boost response...no response...full boost and 250rkw at 19psi at 3200rpm...drift that bitch!

how does this turbo compare to the Garrett GT3071R BB mentioned by hypergear

i also believe a gt30 is the way to go.

even better if you spend an extra 1k for a rb30....youll make the turbo kick in earlier, with less boost and more power.

hopefully your not running a rb20....

engine is an RB25 and don't think ill be putting in an RB30

just looking for a new turbo

Any 450hp core (or close enough will do what you want, each with its pro's and con's.

So GT3071, HKS GT-RS, HKS 2835ProS, GCG hiflow or Hypergear's recommendation.

You seem to want a low cost direct bolt on option so something from Hypergear or GCG will meet the target and for the lowest cost.

550cc injectors will do the job.

i'd go a second hand HKS GTRS if i were looking for something that bolts up....

slightly more responsive than a highflow and very bolt on..... 2835 is a better turbo for a 25 but more $$$ and needs a custom dump.

hks2835...shits on standard boost response...no response...full boost and 250rkw at 19psi at 3200rpm...drift that bitch!

is that all you ended up with? i thought you sorted all that out

mine makes 285 @ 19 psi

thanks for everyones answers

think im gonna go the Garrett GT3071R BB recommended by hypergear along with sard injectors

can i keep the cold start function ?

You'll need additional collars for the sard injectors whereas Nismo don't for similar price new.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...