Jump to content
SAU Community

Recommended Posts

I recently took my car into a mechanic to get a very slight coolant leak at the back of the engine checked out only to find out that i have a blown head gasket and the said mechanic didnt want to touch it as he was unfamiliar with the engine. As i have my car up for sale i don't want to sell it as is or do a dodgy on it so who would you recommend around the southern area to fix this. I was thinking Boostworx because i would like it done properly. any other ideas? IS this a common and expensive job? What should i be looking at paying roughly?

Basically the leak is coming from the very back of the engine and dripping down onto the gearbox. I can smell coolant after i have been driving but its such a slow leak that it never reaches the ground. I only notice a slight drop in the coolant level after a week of driving. The engine itself runs perfectly.

Any help would be appreciated.

Dan

Edited by Muges180
Link to comment
https://www.sau.com.au/forums/topic/291454-blown-head-gasket-repair/
Share on other sites

Basically the leak is coming from the very back of the engine and dripping down onto the gearbox. I can smell coolant after i have been driving but its such a slow leak that it never reaches the ground. I only notice a slight drop in the coolant level after a week of driving. The engine itself runs perfectly.

Any help would be appreciated.

Dan

Are you 100% sure its a gasket? Sounds like one of the hoses leading to your heater core has split. I had this same problem earlier in the year. Will cost a bit in labour depending on your engine and how easy it is to get to said hose... If your gasket had deteriorated you'd probably be finding a bad color in your exhaust due to coolant in the cylinder head...

Boostworx or John @ Southern Hitech can help you if you're down south, Gil @ Road & Track can do it if you're up north

-D

You'd know if it was the head gasket... milky shit under the oil cap, bubbles in the radiator when you take off the cap, etc.

Sounds like a hose to me. And head gasket repairs aren't cheap...

Exactly.I found the same thing the other day, just a hose. the oil is fine and the radiator isnt bubbly.

Ive located the fault hose after a bit of searching, jus gotta replace it tomorro

picture the very back of the rb25 between the firewall and the block. thats where its leaking from but i cant see exactly where its coming from because there is no room.

yiap definately sounds like heater core/hose leading to heater core

-D

I would hazard a guess and say its your coolant line from behind the inlet manifold, which runs around the back of the head, to the turbo. If the engine has ever been removed, chances are the pipe might have been crushed by the firewall (and subsequently a leak forming), or its simply the hose section right near the inlet manifold. Either way, its a bitch to get to (read: impossible). Removing the engine might be required.

You'd know if it was the head gasket... milky shit under the oil cap, bubbles in the radiator when you take off the cap, etc.

Sounds like a hose to me. And head gasket repairs aren't cheap...

Not necessarily.

the coolant isnt discoloured at all. The mechanic did a preassure test on it and said it was the gasket but im still not overly convinced. might take it into Shaun for a second opinion.

The facts so far:

Coolant leak at back of head.

Coolant level goes down in a week.

Pressure test confirms coolant loss in system.

You can have coolant leaking from a head gasket without it affecting your oil if the passage of leak is directly from an external water jacket....they don't always track to an oil gallery so oily radiators or milkshakes in cam covers aren't always present with blown head gaskets.

The other thing to check is whether exhaust gasses are entering the coolant system but then again, leaks don't always track between combustion chambers & water jackets either.

I would hazard a guess and say its your coolant line from behind the inlet manifold, which runs around the back of the head, to the turbo. If the engine has ever been removed, chances are the pipe might have been crushed by the firewall (and subsequently a leak forming), or its simply the hose section right near the inlet manifold. Either way, its a bitch to get to (read: impossible). Removing the engine might be required.

im no expert, but had this happen to me twice. no real warning (temp didnt go thru the roof, no milky residues) but a distinct smell of coolant and a lack of coolant after a few days / week

i think flick had the same trouble with her 32 when she had it too. doesnt bring the temps up to higher than normal temps until theres no coolant / water left in the system

thatd be the first (and less expensive) option to get checked. if those hoses are fine then it'll be the gasket

/2c

I would hazard a guess and say its your coolant line from behind the inlet manifold, which runs around the back of the head, to the turbo. If the engine has ever been removed, chances are the pipe might have been crushed by the firewall (and subsequently a leak forming), or its simply the hose section right near the inlet manifold. Either way, its a bitch to get to (read: impossible). Removing the engine might be required.

ive changed that hose twice now once on my sons car and once on my own first time took me a couple of hrs and the second time less than a hr .

the second time i used a pair of pointy nose pliars about 12 inches long and that made the job a shit load easier . still not a pleasant task at the best of times but buggered if i would pull a motor just too do it tho

You can have coolant leaking from a head gasket without it affecting your oil if the passage of leak is directly from an external water jacket....they don't always track to an oil gallery so oily radiators or milkshakes in cam covers aren't always present with blown head gaskets.

The other thing to check is whether exhaust gasses are entering the coolant system but then again, leaks don't always track between combustion chambers & water jackets either.

Just what I was thinking.

Can you get a small inspection mirror down there, like what a dentist would use?

Not necessarily.

The facts so far:

Coolant leak at back of head.

Coolant level goes down in a week.

Pressure test confirms coolant loss in system.

You can have coolant leaking from a head gasket without it affecting your oil if the passage of leak is directly from an external water jacket....they don't always track to an oil gallery so oily radiators or milkshakes in cam covers aren't always present with blown head gaskets.

The other thing to check is whether exhaust gasses are entering the coolant system but then again, leaks don't always track between combustion chambers & water jackets either.

beat me to it. i have a bore scope if you need to use?

55791.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...