Jump to content
SAU Community

Recommended Posts

You guys work at CF ? The big IT company with the three letters, starting with I ??

I used to work there (but at St Leonards) - Have got a few good friends that work there.

hmmm...i might start looking up peoples names in Blue Pages !!

:jump:

Apologies to the two skylines (R33 and R32 i think) that were on the side of the road (80km/hr zone) of the F3 yesterday about 17:30...

I was on the phone (handsfree car kit, of course !!) and before i knew it i was past you !!

Hope you werent broken down or anything..

:flower:

LOL Moanie!

Spotted a black r33 GTS-T this morning on New Line Road Cherrybrook near the Purchase Road intersection. I waved and flashed, his look was one of, "huh? do I know you?" hehe ;)

Hey guys =)

Just wanna give a shout out to the white r33 with gold wheels and EL dash who i saw on Epping road tonight heading towards Epping a couple of lights after the M2 turnoff. I didnt really catch your plates but im sure you did when you were driving behind me ;)

Im the guy in the blue series 2 r33. I saw your passenger checking out my front bar heheh ;)

I wanted to play but double demerits and traffic wasnt so good...

Anyway, the EL looks great at night! I want them!

Spotted R33 series 1, 2 tone 4 door on Princess hwy out the front of Tynan motors.

Plates: MIZ 25T with green p's

CAR: Has 18's, backs are dished and aftermarket BOV & Exhaust...

Was a very sleek 4 door....

Oh, was also missing a passenger side mirror... :rolleyes:

I am going to have to join the not spotted list also

out of the hundreds of people on this site one of you would have seen a balck r33 skyline series 1 with QLD number plates SLIDE

come on

south west sydney area

car must be that dark that it gets camoflaged in the night

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...