Jump to content
SAU Community

Recommended Posts

I might drop around on the weekend if I see your home and im out, dontk now how much driving ill be doing though, I have less than half a tank and $15 in the account.. haha.. I think I might driving the lancer the rest of the week

thanks mate, ur car sounds nice... man i want a GTR... did u see that ute LOL... what turbo's u running?

Hey mate

Runnin the garret gt2560R's

Just put out 315rwkw on a dynolog dyno @ 1.3 bar. Only been running on actuator boost pressure @ 0.8 bar, but thats still plenty

Hey mate

Runnin the garret gt2560R's

Just put out 315rwkw on a dynolog dyno @ 1.3 bar. Only been running on actuator boost pressure @ 0.8 bar, but thats still plenty

You dont by any chance have a greenish GTR? think i saw you @ bels once?

Hey mate

Runnin the garret gt2560R's

Just put out 315rwkw on a dynolog dyno @ 1.3 bar. Only been running on actuator boost pressure @ 0.8 bar, but thats still plenty

nice nice, car sounds awesome from behind. all it needs is a nice set of wheels mate... well done good result. i only managed 245rwkw on 1.3bar with standard internals, so hopefully when i can get some work done to my engine ill pump that up to near 300...

You dont by any chance have a greenish GTR? think i saw you @ bels once?

My car is a black 33 gtr. It looks greenish when its dirty. and at the moment its absolutely filthy :)

mass_iv - cheers :) Wish i could hear what it sounds like. Never had the opportunity

My car is a black 33 gtr. It looks greenish when its dirty. and at the moment its absolutely filthy :)

mass_iv - cheers :) Wish i could hear what it sounds like. Never had the opportunity

LOL just get someone to drive ur car past you, thats what i do, just hear my car from outside and behind....

SPOTTED JEZ!!!!

was off in my own little world this morning saw a flash of white and checked the rear view mirror!

Heheheheh... Was that you stuck in Traffic around the Chatswood area.??

I was heading back home.

last 1 hr spotted..

Black R33 sexy blond chick driving out near seven hills

Silver R33 with a big FMIC on kissing point rd got a wave gave a wave

few seconds after that I passed a gun metal grey 32 GTR

spotted mass with a bunch of ppl standing around his car

I think thats it. .

saw an R33 GTSt on Epping road then beecroft then penno road.

No spoiler on it, sounds very nice though, a young lady driving!

I was in the green magna sports :)

last 1 hr spotted..

Black R33 sexy blond chick driving out near seven hills

Silver R33  with a big FMIC on kissing point rd got a wave gave a wave

few seconds after that I passed a gun metal grey 32 GTR

spotted mass with a bunch of ppl standing around his car

I think thats it. .

LOL sam yeh that was my mate, he came round to give me a price on a new re-spray, im thinking of spraying it blue pearl!!!!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...