Jump to content
SAU Community

Recommended Posts

gave a wave to a black series 1 at the lights of warrungah rd and pittwater rd

you wouldnt of recised me i was in the truck lol

also spotted a gun metal gray R35 gtr at belrose

spotted a bayside blue R34 GTR on the spit bridge

spotted a white R34 GTR at middleton grang this morring

and too many others in sydney that i lost track of sorry guys lol

That 33 looks nice... very clean :bunny:

Thanks mate :laugh:

ATM it's got a slight black mark on the front-left from an accident I had, other than that, it's pretty top nick.

I wasn't going to buy an R33, was looking at 34s, but I decided to go check this one out as a bit of experience.

Was one of the only skylines I'd seen (that weren't sitting at TSI) that was as clean as it is.

71560_1571740047972_1069621960_1644039_3125791_n.jpg

:)

Also;

SPOTTED: ALX46Y or something, out on Cumberland Highway last night.

Are the Tommy Karia badges legit?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...