Jump to content
SAU Community

Official NSW Skyline spotted thread


CerealKiller

Recommended Posts

pfft mr2s are too gh3y to mention, if I was going to include non-skylines I'd have to include the 350z with the smoking brakes that went off the scale on the pyrometer......2 laps at a time can be tough.....

Link to comment
Share on other sites

spotted black 32 gts today on epping rd

some old guy driving.......it had what looked like a stock zorst..but damn thing was loud....

and niiice silver r33 gtst at unsw MYR 033.....very clean and nice interior.

Link to comment
Share on other sites

just wondering, is there anyone here with the plates LUVIIT - R33 GTR - beuuuuuuutiful car. see it everyday parked outside a storage yard... strangely, the yard is next to the honda showroom... :D

Yep, thanx dude, the plates say ULUVIT .... close enough though

Link to comment
Share on other sites

yeah i see that car when i go to tafe.... is it the one on pacific highway???

if so yeah i seen it aswell and some old dood drives it i think hehe

the old dude you saw was my old man tucking my baby in for the night

Link to comment
Share on other sites

Yep, thanx dude, the plates say ULUVIT .... close enough though

eh, close nuf... i saw it sitting outside like every morning for about 2 weeks.. nuthing suss is it? nice car. thank you very much for placin it there for my viewing pleasure. good while it lasted

Link to comment
Share on other sites

eh, close nuf... i saw it sitting outside like every morning for about 2 weeks.. nuthing suss is it? nice car. thank you very much for placin it there for my viewing pleasure. good while it lasted

nuthin suss, I run the panelshop in between honda and storage king just spent 4 months rebuilding her inside and out. she is getting a new clutch at the moment plus a few other things done, give it a week or so and your veiwing pleasure (and my baby) will be back she belongs.

Link to comment
Share on other sites

nuthin suss, I run the panelshop in between honda and storage king just spent 4 months rebuilding her inside and out. she is getting a new clutch at the moment plus a few other things done, give it a week or so and your veiwing pleasure (and my baby) will be back she belongs.

Ah, here he is. I had a feeling you would get on here to check out the thread Marty

I will be popping down during the week with the MR2 mate.

Nick

Link to comment
Share on other sites

spotted a few r32s and r33s at Macquarie on saturday, all standard plates :(

and also spotted a r32 with UAS sticker on the back and QLD plates going down windsor rd on saturday around 6:30 or 7pm

Link to comment
Share on other sites

Ah, here he is. I had a feeling you would get on here to check out the thread Marty

I will be popping down during the week with the MR2 mate.

Nick

had to check it out after what you said yesterday

yeah bring the car in when you get the chance and I,ll look after it

its good to see someone who takes pride in their ride (or rides)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Go to SP mufflers and get the muffler of size you want and make a nice mid muffler. It's about that simple! I have 2x 3.5 Magnaflow straight through Mufflers and while it's pretty loud with the Varex open, it's quiet enough with the Varex closed. You can also buy off the shelf Magnaflow straight through mufflers as well. You also have a turbo to quiet the car down too. Don't overthink it. Buy my extra Magnaflow muffler sitting on a shelf doing nothing (buy it new, ignore this part)
    • Centre-offset muffler under the floor, same as stock. Just....3.5". The change from straight pipe there to centre-offset will mean that you need to remake some of the pipe (add a bend or two).
    • Hey guys. So my R34 GTT has a custom 3.5” exhaust (done by previous owner) with a high flowing cat, and then just a Varex cannon muffler on the back. The car does drone alot and is really loud even on highway driving just cruising, as you can imagine due to the Varex muffler basically being a straight through with the valve open. As much as i love a loud RB, it can be a bit much with no other muffling in line and just driving casually. I wanted to lower the volume output on the exhaust a bit, as well as remove the drone (probably a way to do both at once), and was going to do it all myself as I am a fabricator and have done exhaust work in the past, so the fab work isnt my issue, im just not sure on the right product or type of product to use to get the job done, and i doubt an exhaust shop would be wanting to help me as they wont be making any money from helping me, unless they supplied the product? Anyway any help or guidance in best way to approach this would be awesome   Thanks in advance
    • Meh, whilst the Honda is a "really" good car and has potential if you want to drop coin on, it was uninspiring for me to look at, but, it did serve its purpose and is now in the boys hands, his happy, his girl is happy, as she wasn't to keen on the noisy old Patrol, and most importantly, the Minister for War and Finances is extremely happy that her "little baby boy" (6'2 nugget who is currently training to be a copper, which will make 3 coppers in the immediate "circle of trust") has a well sorted reliable car that doesn't guzzle diesel Me, I'm more than happy with the NC MX5 that I replaced it with, it's a fun little car that I like looking at, like driving, and yes..... I do like the fact that the maintenance and modifications that I have done/will do are plentiful and relatively cheap, well........ while staying naturally aspirated slow that is, and that's all I really need for a fun little daily, I can rev the 5hit out of it rowing through the gears and never really break the speed limit  In saying that wicked word, "modifications", I've already ordered something for some noise and an additional "3 ish" horse powers, or whatever it gives, in the form of a header, and, a new set of "cheapo" BC coilovers that are already sitting in the shed waiting to get put in, I had the same BC's in my old NB and found they were fine for the street, hwy, and the occasional track days I did in it, they have 6kg front and 4kg rear springs which is about 10% stiffer than the stock springs which I found worked well for their price  I've also already been in touch with MX5 Mania in Dural, so once the header is on it will get a ECUTek RaceROM tune there (I cannot rev match for 5hit, and I loved the RaceROM rev match and FFS in my old 86 "RIP") In other, maintenance news, I put some new sparkler plugs in it, and have a new set of DBA Street series pads to put in over the next day or so, I'm running the DBA street series in the SS and Honda and really like them, they work great and are not dusty at all I've also booked in a few days leave over this weekend to give me 4 days weekend do some paint correction and give the leather seats some conditioning and interior some Bissell and steam cleaning OCD lovin', the carpet and interior looks clean, but from my experience with the Bissell IRT carpet, and the steam cleaner IRT trim, looks can be deceiving I've also found that finding a detachable hard top is proving problematic, the main reason why I didn't like the NC initially was the power retractable hard top that I seen them with gave the roof line a weird look, the detachable roof though looks good, and is a same shape as a NA/NB hard top, similar, but unfortunately not the same as it has different fixture point on the front, so fitting a easy to get NA/NB detachable hard top is no bueno New Old cars are fun, cleaning, hunting and playing around brings much joy How are your beasties going? Do you still have the Skyline with the LS???, or Barra??? that you were playing with
×
×
  • Create New...