Jump to content
SAU Community

Recommended Posts

Hi guys, I have been considering an aftermarket mechanical LSD, probably a Kaaz 1.5 -way and was wondering if anyone has experience / an opinion on the durability of these.

My car is an R33 GTST with some basic mods and is my daily driver. I want the diff for the odd track day here and there and for the occasional traffic-light grand prix.

I have read plenty of positive reviews here about the aftermarket LSDs but ultimately I want something that is also going to last. If the Kaaz unit isn't going to give me more than say 20,000km then maybe I would be better off shimming up the standard diff every so often?

Any advice appreciated

is your concern based on anything ? and what exactly are you woried will wear out ?

Just worried about how quickly the friction plates might wear out.

I guess my concern was that while I had read a lot of positive information about these diffs, I couldn't seem to find any info about how long they last.

I just don't really want to spend $1300 or thereabouts on a new diff and then have to replace it after 18months of mainly street driving.

If anyone has any experience with these things on a daily driver and has got a decent amount of kms out of it, be it the Kaaz, Nismo, Tomei, I would be interested to know.

My shimmed/rebuild stock diff is mechanical, it was the first thing done really, and that was about 10,000-15,000 ago now. Still going strong without a hint of issues.

A Kaaz would be the same, as with all other diff's. Nothing will last however if you abuse it every day of its life

It's the length of a piece of string mate. There's no exact km a diff or gearbox will last, there's not even an approximate. Even on the known weak gearboxes I deal with there can be 80,000km difference between two cars when the "factory faults" begin to show.

A diff, even mechanical LSD, can outlast the engine if you drive it with that as your goal...it can last you 10 minutes if that is not your goal. Don't expect to get away with treating mechanical items harshly and being able to use mileage as some sort of wear indicator, because something can go on you at any minute.

The worst mistake people make is not running in a new or freshly rebuilt/reconditioned drivetrain component. I've sent out diffs that come back for warranty a week later and the customer was stupid/honest enough to leave their bald tyres on the car and worn down crown/pinion inside the diff housing.

  • 4 weeks later...

Mine is extremely noisy. Pedestrians will definitely hear it. When cold its fine, drives like a viscous. Its when its warm that it gets savage.

But u wont be sorry with a kaaz, on a track car, on a daily....................not so much

KAAZ FTW.

Question for Bubba how was the nismo as a daily was it noisy like the Kaaz are?.

Cheers,

Dave

It is noisy, more so when cold (it's really, really tight when cold so it skips and clunks). Once warm it slips when it should but you get a kind of dull grinding sort of noise.

Really, it's about how you drive these things.. hold constant throttle round a corner and it's fine. Go round the corner on decel and it will clunk and skip (I have the 2-way), go round the corner with a little bit of gas and it will clunk and skip.. go round the corner with lots of gas and it's super fun happy slide time :D

Personally, I love it and wouldn't want any other diff.. not putting one in the Stag though :P

Thanks Hamish & Bubba I might look into the 1.5way Nismo that's Seems ok not to noisy is what I'm after thanks for the input people if anyone else has an OS giken to compare with that would close the circle of info that I would need to choose for my GTR.

Cheers,

Dave.

I have the Nismo GT LSD Pro 1.5way in my 32 gtr.

A touch chattery when turning and cold but hardly much chatter when warmed up.

Will chatter slightly though when doing a u turn and warm.

Note: it chatters and cluncks a lot more with the run in oil that comes with it (for obvious reasons) and has quitened down since putting in some castrol diff oil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did you panel beat the dents or have you tried to repair this only using filler?  Is your sanding block soft/flexible and is following the shape of the panel rather then just knocking down the high points? 
    • I haven't knocked them down yet. I think I made the repair more complex than it should have been. I had rock chips combined with waviness and dents and I tackled it all in one because it was near each other and just end up wasting a bunch of bog lol. I'll knock down those areas and see how I go. And yep what you are saying at the end is correct. I think I might be sanding the top of a steep hill then my sanding block falls into the dent and gets rid of the guidecoat if that makes sense. Though shouldnt unless I'm covering too big of an area with not a long enough block. I'll try something new and provide some updates. Getting there though! Thanks as always.  
    • Yeah makes sense, hard to comment on your situation without seeing what your doing. I was talking generally before, I would not be looking to randomly create low spots with a hammer to then have to fill them.  It's hard without seeing what your doing, it sounds like you are using the guide coat to identify low spots, as you're saying the panel is still wavy. I don't see how you're not ending up with patches of guide coat remaining in a wavy panel? Once the high spots are knocked down to the correct level, surely to have a wavy panel you need low spots. And those low spots would have guide coat still in them?
    • So I'll put filler past the repair area a bit to make sure I don't miss anything. Then I'll block it until it's almost level, put the guidecoat, then keep blocking until it's gone. Then it's still wavy.  In regards to hitting the panel, I saw this video might give more context - Skip to 0:47 he knocks it down. But yeah I'm sanding until the guidecoat is gone then checking because otherwise my filler is still well above the bodyline. Unless what you're saying is I should put guidecoat around it early, surrounding the filler then stip once it's gone?
    • I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
×
×
  • Create New...