Jump to content
SAU Community

Recommended Posts

Hi guys, I have been considering an aftermarket mechanical LSD, probably a Kaaz 1.5 -way and was wondering if anyone has experience / an opinion on the durability of these.

My car is an R33 GTST with some basic mods and is my daily driver. I want the diff for the odd track day here and there and for the occasional traffic-light grand prix.

I have read plenty of positive reviews here about the aftermarket LSDs but ultimately I want something that is also going to last. If the Kaaz unit isn't going to give me more than say 20,000km then maybe I would be better off shimming up the standard diff every so often?

Any advice appreciated

is your concern based on anything ? and what exactly are you woried will wear out ?

Just worried about how quickly the friction plates might wear out.

I guess my concern was that while I had read a lot of positive information about these diffs, I couldn't seem to find any info about how long they last.

I just don't really want to spend $1300 or thereabouts on a new diff and then have to replace it after 18months of mainly street driving.

If anyone has any experience with these things on a daily driver and has got a decent amount of kms out of it, be it the Kaaz, Nismo, Tomei, I would be interested to know.

My shimmed/rebuild stock diff is mechanical, it was the first thing done really, and that was about 10,000-15,000 ago now. Still going strong without a hint of issues.

A Kaaz would be the same, as with all other diff's. Nothing will last however if you abuse it every day of its life

It's the length of a piece of string mate. There's no exact km a diff or gearbox will last, there's not even an approximate. Even on the known weak gearboxes I deal with there can be 80,000km difference between two cars when the "factory faults" begin to show.

A diff, even mechanical LSD, can outlast the engine if you drive it with that as your goal...it can last you 10 minutes if that is not your goal. Don't expect to get away with treating mechanical items harshly and being able to use mileage as some sort of wear indicator, because something can go on you at any minute.

The worst mistake people make is not running in a new or freshly rebuilt/reconditioned drivetrain component. I've sent out diffs that come back for warranty a week later and the customer was stupid/honest enough to leave their bald tyres on the car and worn down crown/pinion inside the diff housing.

  • 4 weeks later...

Mine is extremely noisy. Pedestrians will definitely hear it. When cold its fine, drives like a viscous. Its when its warm that it gets savage.

But u wont be sorry with a kaaz, on a track car, on a daily....................not so much

KAAZ FTW.

Question for Bubba how was the nismo as a daily was it noisy like the Kaaz are?.

Cheers,

Dave

It is noisy, more so when cold (it's really, really tight when cold so it skips and clunks). Once warm it slips when it should but you get a kind of dull grinding sort of noise.

Really, it's about how you drive these things.. hold constant throttle round a corner and it's fine. Go round the corner on decel and it will clunk and skip (I have the 2-way), go round the corner with a little bit of gas and it will clunk and skip.. go round the corner with lots of gas and it's super fun happy slide time :D

Personally, I love it and wouldn't want any other diff.. not putting one in the Stag though :P

Thanks Hamish & Bubba I might look into the 1.5way Nismo that's Seems ok not to noisy is what I'm after thanks for the input people if anyone else has an OS giken to compare with that would close the circle of info that I would need to choose for my GTR.

Cheers,

Dave.

I have the Nismo GT LSD Pro 1.5way in my 32 gtr.

A touch chattery when turning and cold but hardly much chatter when warmed up.

Will chatter slightly though when doing a u turn and warm.

Note: it chatters and cluncks a lot more with the run in oil that comes with it (for obvious reasons) and has quitened down since putting in some castrol diff oil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...