Jump to content
SAU Community

Recommended Posts

Hey guys, i've got a S2 R33 skyline here in Sydney thats being wrecked. It's a late series 2 with approx 97,xxx k's on the clock. Whole car is being wrecked so if youre after any small bit, chuck me a PM!

I can post pretty much everything except the seats & bootlid

Rb25det engine, good compression across all cylinders; 150-155psi. - $950 ono for the bare motor (no injectors, coils, turbo, accesories)

5sp Manual gearbox. Great condition box, shifted well and no crunching. Includes slave cyl, crossmember, shifter and tailshaft - $1350ono

I can sell this as a whole manual conversion kit if anyone is interested

Greddy Profec B Spec II boost controller - $350

post-35556-1256802157_thumb.jpg

Z32 AFM + plug - $200

post-35556-1256802174_thumb.jpg

S15 480cc injectors, will drop straight into rb25 rail - $400

post-35556-1256802195_thumb.jpg

Apexi PowerFC r33/rb25det, no controller - $1100

post-35556-1256802295_thumb.jpg

GCG Hiflow R33 turbo, good condition, no smoke. minimal/negligible shaft play - $1100

post-35556-1256802279_thumb.jpg post-35556-1256802246_thumb.jpg post-35556-1256802226_thumb.jpg

Splitfire SF-DIS-005 coilpacks to suit s1.5/S2 ECR33/rb25det and BNR34/rb26dett - $400

post-35556-1256802310_thumb.jpg

R33 GTR front seats, few small ciggie burns/marks on the drivers seat. Comes with rails - $750

post-35556-1256802338_thumb.jpg

HKS turbo timer + nissan harness - $65

post-35556-1256802389_thumb.jpg

GTR wing + bootlid (white) - $250 - pickup only!

post-35556-1256802415_thumb.jpg

2x 18x9.5" 5x114.3 +38 Starcorp wheels and tyres, big dish! - $500/pair

post-35556-1256802494_thumb.jpg

Also have pretty much all the stock parts for sale:

Engine bay:

3" dump & front pipe suit r33/r32 - $80

S2 Rb25det engine loom - $200

R33 aircon compressor - $100

R33 power steering pump - $100

R33 alternator - $100

Engine Mounts - $80

Fuse box lid - $20

Washer bottle - $20

Radiator overflow bottle - $20

Charcoal canister - $30

S2 ABS unit/pump - $100

Bm-44 ABS brake master cylinder - $75

Stock BOV + crossover pipe - $50

post-35556-1256802614_thumb.jpg

Exterior/suspension/driveline:

Front + Rear calipers SOLD

Rear SKYLINE garnish (white) - $50

Castor rods with aftermarket bushes - $90/pair

Front lower control arm (left side only) - $70

Front upper control arms - $50/pair

Front hubs - $80 ea

Rear lower control arms - $50 each

Rear 5 stud hubs - $160 pair

Handbrake assembly & cables - $160 pair

Manaual (4.11) ABS diff - $250

Driveshafts $50 pair

Rear upper arms - $50

post-35556-1256802642_thumb.jpg

Interior:

Floormats - $100

Drivers side window switch - $75

Drivers door motor - $90

Passenger door motor - $50

S2 door trims, full set (front+rear) good condition - $100

post-35556-1256802695_thumb.jpg post-35556-1256802677_thumb.jpg post-35556-1256802725_thumb.jpg

Instrument cluster with approx 97,000ks - $120

dash + gearstick surround - SOLD

Glovebox - $40

S2 dash pad (with passenger airbag & panel) - $250

S2 Steering wheel with airbag - $250

Centre console - $50

S2 Rear seats, good condition - $50

Seatbelts, full set - $80 (will seperate)

Ignition barrel + door barrels + key - $100

PM me if youre after anything! Cheers

Link to comment
https://www.sau.com.au/forums/topic/294109-wrecking-s2-r33-skyline-whole-car/
Share on other sites

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

well i couldnt send a pm, guessin ur inbox is full?

im after the front inner guard liners with all bolts n clips (both left and right side) pm me price please :(

i can pick up

cheers

you have pm

wing and boot lid is mine :thumbsup:

Pm sent!

sent pm

Replied

hey mate im interested in your boost controller, but i cant pm u without 10 posts first ..

anyway man if u could pm me then that would be great ..

cheers mate,

pon

PM sent

pm sent

PM replied

well i couldnt send a pm, guessin ur inbox is full?

im after the front inner guard liners with all bolts n clips (both left and right side) pm me price please :)

i can pick up

cheers

Sorry mate I don't have any of the guard liners

Splitfire SF-DIS-005 coilpacks to suit s1.5/S2 ECR33/rb25det and BNR34/rb26dett - $400

post-35556-1256802310_thumb.jpg

um i thought that all rb26 coil packs were the same??? and there fore not the same as s1.5/s2, instead, the same as s1

is the turbo still available !

Yep still for sale, PM me if interested

interedted in the Z32 afm

where r u located

can u email ur phone number or call me on 04036399649

PM sent!

PM sent

Pm replied

is the z32 still available am interested. if it us PM me and we can work something out.

Yep it's still for sale, Pm me if interested

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...