Jump to content
SAU Community

Recommended Posts

So is this the recognised best product for external use?

My R34 4-door's passenger side B-pillar factory carbon vinyl is very sun-damaged, and needs to be replaced, but I'm not sure what is the best UV/weather resistant product to use?

I'm in Adelaide, so any supplier references would be good also.

  • Replies 477
  • Created
  • Last Reply

Top Posters In This Topic

So is this the recognised best product for external use?

My R34 4-door's passenger side B-pillar factory carbon vinyl is very sun-damaged, and needs to be replaced, but I'm not sure what is the best UV/weather resistant product to use?

I'm in Adelaide, so any supplier references would be good also.

Well, if you want, you could send your b pillar to me and I can wrap it for you :P

OR I could send you 2 strips of vinyl and you can wrap it urself :D

So is this the recognised best product for external use?

My R34 4-door's passenger side B-pillar factory carbon vinyl is very sun-damaged, and needs to be replaced, but I'm not sure what is the best UV/weather resistant product to use?

I'm in Adelaide, so any supplier references would be good also.

I'm in Adelaide with an R34 4-door with the exact same issue (sun-damaged factory carbon vinyls)... I've been recently in contact with a local seller of DI-NOC, but I'm still waiting a call-back from them.

I'm honestly not really looking forward to tackling fixing it - I don't know whether the pillars remove like in coupes - and I'm gonna have to try and remove the factory wind deflectors too (without destroying them!).

I'll let you know if they get back to me (they were a reference from the 3M DI-NOC website for retailers in SA).

I'm in Adelaide with an R34 4-door with the exact same issue (sun-damaged factory carbon vinyls)... I've been recently in contact with a local seller of DI-NOC, but I'm still waiting a call-back from them.

I'm honestly not really looking forward to tackling fixing it - I don't know whether the pillars remove like in coupes - and I'm gonna have to try and remove the factory wind deflectors too (without destroying them!).

I'll let you know if they get back to me (they were a reference from the 3M DI-NOC website for retailers in SA).

Well if you just need the vinyl to fix your pillars, then I'm sure I can sell you some cheaper than they can ;)

Lemme know how much they wanna charge you.

using any printed vinyl like those B-pillar nismo stickers will always fade badly if you leave the car in daylight alot...

If this stuff has a texture to it I can imagine using it externally it could collect dirt and grime and be annoying to when washing the car...

real carbon fibre items are the only way to have a long lasting trouble free reality...

I'm in Adelaide with an R34 4-door with the exact same issue (sun-damaged factory carbon vinyls)... I've been recently in contact with a local seller of DI-NOC, but I'm still waiting a call-back from them.

I'm honestly not really looking forward to tackling fixing it - I don't know whether the pillars remove like in coupes - and I'm gonna have to try and remove the factory wind deflectors too (without destroying them!).

I'll let you know if they get back to me (they were a reference from the 3M DI-NOC website for retailers in SA).

Well if you just need the vinyl to fix your pillars, then I'm sure I can sell you some cheaper than they can :D

Lemme know how much they wanna charge you.

JRM: I'll be very interested in the results of your research :P could you send me a PM when they get back in contact with you, in case I forget to check this thread, lol.

I don't expect the actual process to be especially difficult. I've had a look, and the factory vinyl is directly applied to the steel door frame. I believe that a careful approach with a heat gun (hair dryer if you need) to avoid damaging the adjacent rubber seals will allow the old vinyl to be peeled off. A new piece can then be applied, and trimmed 'in-situ' to perfection, ensuring that it wraps around a little.

-Heat gun

-Solvent (metho) & rag

-Trimming knife

-Soapy water for application & another rag.

:huh:

Charles: Sorry mate, I'm not prepared to send my two passenger side doors to Victoria for you to do them :lol: Once jrm has this quote he can compare that to your price though ;)

using any printed vinyl like those B-pillar nismo stickers will always fade badly if you leave the car in daylight alot...

If this stuff has a texture to it I can imagine using it externally it could collect dirt and grime and be annoying to when washing the car...

real carbon fibre items are the only way to have a long lasting trouble free reality...

You are quite wrong, I left my car outside for the last few days, since its Melbourne, the vinyl went through some crazy weather, heavy rain and 38c days and it is still spotless :down:

The only time it will collect dirt and grime is when someone runs their hand on my vinyl over and over and over and over lol, and even then, a bit of water and a wipe, it's clean again.

I'd like to see how it looks with a clear coat. If it's nice and dark/glossy then I'll get you to attack my MR2's interior for me :P

I'm thinking of doing a custom thing to go over my auto box (the bit where it says P, R, N, D, 2, 1) coz it's become faded. Would that be hard?

Edited by jezza boii
I'd like to see how it looks with a clear coat. If it's nice and dark/glossy then I'll get you to attack my MR2's interior for me :thumbsup:

I'm thinking of doing a custom thing to go over my auto box (the bit where it says P, R, N, D, 2, 1) coz it's become faded. Would that be hard?

PM sent :P

Im liking it quite alot.. except the sides of the wing.. a little too bland for me..

I really need to get some for my B pillars

For B-pillars, if you want, you can send your pillars to me and I'll wrap them for you for $40 (20 each)+postage back to you :D

Or I can send you 2 pieces of CF vinyl, enough to wrap both pillars for $40 ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...