Jump to content
SAU Community

Recommended Posts

hey all

just sold the 260 today... looking to get an rs4 for a tow rig...

ive found one im semi into... it nas xanavi witch neither of my stags have had b4... ive never actualy played with it...

is it all im japanese?

does it control audio also? (theres a single din tape player under it i believe)

how had is it to get the tv working while driving?

would i need to get a headunit in there??

the lower headunit said 'cd change' is the xanavi unit a stacker also?

ill have more of a play tomorrow when i actualy properly see the car...

cheers!

Link to comment
https://www.sau.com.au/forums/topic/297100-xanavi-help/
Share on other sites

is it all in japanese? yes

does it control audio also? to a small degree

how had is it to get the tv working while driving? easy, plenty written about this over the years, you will need a digital tv tuner that outputs in NTSC and a unit which allows screen to be viewed whilst car is in motion.

would i need to get a headunit in there?? no, depends on where you want to go with setup.

the lower headunit said 'cd change' is the xanavi unit a stacker also? stacker in back

Basically your xanavi (in oz) is just a screen for operating the air con and an input for any NTSC video signal (tv, dvd, sat nav etc) you put through it. The inbuilt Jap Navigation and Jap TV are unusable.

Link to comment
https://www.sau.com.au/forums/topic/297100-xanavi-help/#findComment-4948195
Share on other sites

You can just get a DVD head unit to replace the tape player and run all the sound etc out of it. Then just hook the screen up for displaying the picture. This is what i have done. If you go this option get a dvd-mp3 player. You can fit so many mp3s on a DVD. My player also displays the song and artist information on the xanavi screen.

The video input is in the back behind the left hand strut tower (from memory) you will have to remove the interior panel.

There is a jack in the front of the stock unit that allows you plug an ipod etc. in. Then you just have to figure out the menus to select the right source. If you do put in another head unit you will loose this function as all the sound will be through the new unit.

To have the screen on while driving you will need to get your hands on a device that plugs in between the screen and the main loom. I have no idea what they call them, basically it just intercepts the signals and allows the screen to stay on. Unfortunately there is not a simple wire around solution. The car may have one in it already, mine did.

Link to comment
https://www.sau.com.au/forums/topic/297100-xanavi-help/#findComment-4948334
Share on other sites

Sorry car is at the workshop without an engine atm so I don't have pic's... if I come across one I'll post... but yeah I think aftermarket headunits can be made to mount just as flush as the OEM unit (the single-DIN one at the bottom of the xanavi setup)... if that's what you mean. Mine did. I just left the outer plastic surround/frame thing that comes with the headunit off.

I recommend getting one with at least a USB port, 'cause 16-32GB USB keys are pretty cheap these days and a (* load easier to manage (IMHO ;)) than cds/dvds etc. Also recommend bluetooth capability for your phone...

I think nobody's mentioned yet that the xanavi screen folds down (has an "eject" button) and behind it there is a slot-load CD player. Plus when it's folded down it doubles as a drink shelf :D

There are two 3.5mm phono sockets (the kind usually found on headphones etc) on the front of the xanavi unit; top is for video and bottom for audio (99% sure could be the other way round!)

To use as an input you press the TV button (is marked in English) and select "VR2" input on the touch-screen.

The climate control is also handled by the touchscreen; very cool. The two Jap "buttons" (on-screen) below the image of the air source are for manual selection of air source (left button) and outside temperature (right button). Temperature display etc are in English.

If you install an aftermarket headunit, you can wire the output from the Xanavi unit into its auxilary input. This is how I have mine setup. That leaves me with the front panel audio/video inputs on the Xanavi still working, the NTSC sound output and the internal CD player output, all working through my aftermarket headunit. You'll need a 5-pin DIN plug to do this (easily available). If you need the pinouts just let me know but pretty easily found by testing.

Link to comment
https://www.sau.com.au/forums/topic/297100-xanavi-help/#findComment-4949270
Share on other sites

ok thanx guys

will i be putting my cd's into my headunit or xanavi tho?

so i need a headunit that does the following:

usb

direct ipod

dvd with video output (to then plug into the xanavi imput??)

sound imput (for when i use the tv?)

and a digital tv reciver with ntsc output, witch plugs into where?? the xanavi or a plug ive heard about in the rear passanger boot area

another unit witch hooks in **dont no where???** that lets it play while driving?? what are these called where from?

ive gota nokia carkit ill use anyway

am i missing anything??

dave im not quite getting you on this 5 pin thingo??

after this what will my xanavi unit be doing audio wise?

thanx for all your help guys.

Edited by chef_stagea
Link to comment
https://www.sau.com.au/forums/topic/297100-xanavi-help/#findComment-4949477
Share on other sites

No need to have an aftermarket head unit unless you plan on running amps, subs etc.

edit: sorry for shit photo's- iphone @ night lol

- My iphone plugs direct in the system and doubles as a incar phone kit too- just plug into phone. When someone calls the phone thinks you have earphones in- all audio goes through sound system:

IMG_0805.jpg

IMG_0812.jpg

- Standard headunit is linked to a 6 stacker in boot:

IMG_0816.jpg

- You can also put 1 CD at a time into the Xanavi unit (screen pops down):

IMG_0811.jpg

- My Xanavi has a digital TV tuner installed (thanks to chook! Oh and the blue thing is just a power inverter i use to power the DVD player- plugs into power socket in boot, but could easily be hardwired).

IMG_0235.jpg

IMG_0804.jpg

IMG_0803.jpg

IMG_0813.jpg

- DVD player sits in pouch behind passenger seat with small slit in seat covers- small enough to put underneath passenger seat also:

IMG_0814.jpg

If your looking for a stagea with xanavi and can tow you know mine is for sale :P

Edited by EvoMitchy
Link to comment
https://www.sau.com.au/forums/topic/297100-xanavi-help/#findComment-4950064
Share on other sites

  • 3 weeks later...
so you have a dealer fitted reverse cam?

theres a way to make that thing switch by itself you know. ( I need the OEM TV box to do it.)

I'm sure you can :3some:

The factory one comes with a little relay as per diagram (KK6383)

post-37588-1261042840_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/297100-xanavi-help/#findComment-4992462
Share on other sites

I'm sure you can :cheers:

The factory one comes with a little relay as per diagram (KK6383)

post-37588-1261042840_thumb.jpg

yep thats the full version of it. I toss a miniture one in the TV box and use my own camera :(

Link to comment
https://www.sau.com.au/forums/topic/297100-xanavi-help/#findComment-4992654
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...