Jump to content
SAU Community

Recommended Posts

http://video.google.com.au/videosearch?hl=...950715576962593

Watch the yanks turn on yota after this. The average american still hates anything not red white and blue but the japs begrudgingly won them over with fuel efficient cost effective reliable vehicles.

The litigation fallout will be mega, According to a stateside friend even people who havnt had the problem are already talking to lawyers re putting their family's at risk.

Sucks to be toyota atm.

Link to comment
https://www.sau.com.au/forums/topic/297930-toyota-recall/
Share on other sites

why didnt the idiot turn the car off ? XD LOL instead calling 9-1-1 god !

I remember watching one of those "police chase" video shows, and some woman had the same issue in her SUV. She managed to call 911. They cleared the freeway she was on, sent a fleet of squad cars and a helicopter out, boxed the SUV in, and then the lead squad car let the SUV tap it in the back before hitting the brakes to pull both vehicles up. The other 2 cars were there to hold the vehicle steady.

My only thought was, "after they cleared the freeway etc, why didn't they just get the stupid bint to turn the car off and let it coast to a halt instead of causing thousands of dollars in damage and putting lots of peoples' lives at risk?" The freeway was, in typical American style, dead straight so the loss of power steering would have been no biggie.

It's like the whole "space pen vs pencil" thing all over again.

If I was the insurance company, I would have told both the PD and the woman to get f**ked if they tried to submit a claim for the damage when a collision-free solution was right there. Of course then the woman would have sued the manufacturer, since that's what they do in the US

Also, some person in the UK had a similar issue on the motorway over there in a BMW. Luckily he copped what he deserved. BMW even released a statement that was full of common sense. I can understand that its possible the shifter jams into place and so neutral isn't available, but it'd be a tall order to not be able to turn the key.

Edited by scathing
Link to comment
https://www.sau.com.au/forums/topic/297930-toyota-recall/#findComment-4959545
Share on other sites

Very sad and freaky hearing that 911 call of the family that died, to my understanding the car had a push start ignition system no? So perhaps in the panic they were just pushing the button, not realising you have to hold it down or something? Still, if you had the time to make a phone call, surely you could do something about it. I just can't imagine being in a situation like that and not being able to stop the car. Put it into neutral, or rip the hand brake, or pull some wires out from under the dash or ram it into something from the side to try and slow it down.

Link to comment
https://www.sau.com.au/forums/topic/297930-toyota-recall/#findComment-4959762
Share on other sites

I remember watching one of those "police chase" video shows, and some woman had the same issue in her SUV. She managed to call 911. They cleared the freeway she was on, sent a fleet of squad cars and a helicopter out, boxed the SUV in, and then the lead squad car let the SUV tap it in the back before hitting the brakes to pull both vehicles up. The other 2 cars were there to hold the vehicle steady.

My only thought was, "after they cleared the freeway etc, why didn't they just get the stupid bint to turn the car off and let it coast to a halt instead of causing thousands of dollars in damage and putting lots of peoples' lives at risk?" The freeway was, in typical American style, dead straight so the loss of power steering would have been no biggie.

It's like the whole "space pen vs pencil" thing all over again.

If I was the insurance company, I would have told both the PD and the woman to get f**ked if they tried to submit a claim for the damage when a collision-free solution was right there. Of course then the woman would have sued the manufacturer, since that's what they do in the US

Also, some person in the UK had a similar issue on the motorway over there in a BMW. Luckily he copped what he deserved. BMW even released a statement that was full of common sense. I can understand that its possible the shifter jams into place and so neutral isn't available, but it'd be a tall order to not be able to turn the key.

irony being with those - they are DBW! how the hell do you get a DBW system stuck UNLESS the ECU FCKS UP!

Link to comment
https://www.sau.com.au/forums/topic/297930-toyota-recall/#findComment-4960380
Share on other sites

Last year, Toyota Australia sent my parents a letter telling them to get their Camry checked, coz apparently the model they got had a bug in it where the indicators & headlights will go off randomly...

Never happened yet...

Americans call 911 for anything.

Link to comment
https://www.sau.com.au/forums/topic/297930-toyota-recall/#findComment-4960838
Share on other sites

Or what they could have done is put the gear in Neutral, if it was an auto gear box at least then the car will just cost, then yank the handbrake up.

scando flick instead? see how those stockies hold up..

yea seriously, cant believe they didnt jam it into a wall or something to slow up

Link to comment
https://www.sau.com.au/forums/topic/297930-toyota-recall/#findComment-4969277
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...