Jump to content
SAU Community

Recommended Posts

  • Replies 119
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Bosch HEC-716. I have been using them for about 7 years. I went to get some new ones for the first time last year and the design has changed, not even close to how they were. The pic is of the new rail. The plug leads are cut down to suit, so don't think you can just buy them off the shelf. I want to remake it and should beable to get someone like QLD Ign leads to make me a set. That is if they are long enough to fit their machine.

This is the old style HEC-716 wher I had an even shorter plug lead. While it was compact and neat it was a royal pain to swap a set of pulgs in a hurry between rounds. Disreguard the 3L sticker, stiring the pot for some scrutineers hahahaha.

Picture001.jpg

  • 2 weeks later...
  • 3 weeks later...

Work and life have been getting in the way of being able to spend much time in the shed. Easter has been tagged as car time!!!! Yesterday I stripped back as much as i could out of the engine bay and got stuck into seam welding. I've done this a few times now and find it to be very beneficial if you are going to be doing much track work. Seam sealer is a pain because no matter how I try it is always still down in the join, messing up the first little bit of every weld. Bang some heat in, give it a mo, and plough on. I re-seam sealed it all up so the will be no rust concern in 10 years time. By the time I had given it all a rub over with surface prep, prepsol and had the basic masking done, the sun had gone down and taken the light for my spray boot with it.

Picture023.jpg

Picture021.jpg

Picture022.jpg

Back in the shed I wanted to make sure the Fglass guards ,which have been copied off my my race 33, fit up properly. Some little fixups needed.

Picture024.jpg

Painted this morning, primer on any exposed bits first, then satin black. Now, before anyone says, "Should have primed it all rar rar rar" Its a srteet car that will get flogged with regular and absolute gay abandon on tracks. ITS NOT A SHOW PRINCESS.

Picture032.jpg

Picture033.jpg

Picture034.jpg

Just waiting now for some help to push it back in the shed.... when the paint has set a little more though. Want to get the guards and bumper painted to day as well. Tomorrow I should be able to get the motor box and exhaust back in and stone guard the inner of the front guard area. Monday get the bodywork fitted and anything else that has popped up. I've got tues and wed off and planing to take it to a mates panel shop to roll and flare the rear arches. I don't have cool enough toys for that... Yet.

Its definitely an area that I'll be looking at when I rebuild Gentle's front end but that will not be for a few months yet, deff have some ideas to run through. Need to focus on this beast first.

Sat arvo Sara the fantastic spray painting and panel beating champion girlfriend of mine who I love, got the spray putty on and left it to harden overnight. Had to hang it some where.

Picture035.jpg

and today She put the black GLOSS on. I love her sooooooo much!!!! Thank you.

Picture036.jpg

For the record, my painting is not very good. On the result of my first attempt I was told that the finish looked like I had painted it at the beach on a windy day. Not from Sara I must add, she has more tact than that.

It is soooooo close to going for RWC. first I need to pump the rear guards so I going to a mates panel shop tomorrow and wed for some guided hammer wielding!

the motor n box went in today and got everything in the engine bay pretty much completed. The new turbo sits back about 20mm and has made some issues for the piping. Still need to get the fuel system in the boot sorted, that will happen over the next week or so...... I betting on so. The guards and bumper are on properly too now, that took longer that I expected. Looks good though me thinks. a long easter weekend well spent.

Picture.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...