Jump to content
SAU Community

Recommended Posts

spotted what i think was a defect station at the bottom of athlon drive, outside the electric station turning left onto erindale drive

one lane was blocked off, about 10+ cops, and 3-4 cars left on the side of the road. definately wasn't an RBT station, so my good money is on defect station, careful eh

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/179/#findComment-1423471
Share on other sites

spotted what i think was a defect station at the bottom of athlon drive, outside the electric station turning left onto erindale drive

one lane was blocked off, about 10+ cops, and 3-4 cars left on the side of the road.  definately wasn't an RBT station, so my good money is on defect station, careful eh

well i dont think mum's sss that i have today will get defected :) i am safe

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/179/#findComment-1423534
Share on other sites

yep saw that as well, as i was heading towards woden...

hmmm i know i have some pickonable stuff.

yeah i'd be done hard methinks. mind you, there are other members of this fraternity (who might own r32 gtrs.. might be white...) who may as well just keep the KY in the glovebox... :confused: i don't even want to know how much out of pocket this person might be!!! haha

d

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/179/#findComment-1423856
Share on other sites

spotted my mate telling me a R33 rolled yesterday at the Round about near lanyon. he said it was white, tried to drift around a corner, hit a gutter and then flipped. when i drove past today, all i could see was a big black mark on the gutter on the outside of the roundabout as if you were heading towards gordon (turn right towards tuggas, left toards lanyon or u-turn back towards calwell) i dont know if he was lying or not, anyone car to shed some light????

also spotted a gun grey R32 GTR on the same road, gave thumbs up and then a grey R33 gtst in tugags

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/179/#findComment-1424302
Share on other sites

spotted what i think was a defect station at the bottom of athlon drive, outside the electric station turning left onto erindale drive

one lane was blocked off, about 10+ cops, and 3-4 cars left on the side of the road.  definately wasn't an RBT station, so my good money is on defect station, careful eh

probably defects too...but mostly, they are checking for out of date rego..

I got done on Hindmarsh Dr a few weeks ago....same set up as what you described.

my rego was a few days overdue, I had to leave the car on the side of the road. All the other cars sitting there were for the same thing.

Anguss...that doesn't sound good ;)

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/179/#findComment-1424626
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...