Jump to content
SAU Community

Recommended Posts

Time to rub it in....

Spotted 2 R35 GTRs at ESP today. Pics will be up shortly. The white one went on the dyno and I was lucky enough to go for a ride in the pink donut king one.... OMG words can't describe the awesomeness!!! :laugh:

Whaaa??? How did you get to go for a ride in the donut king one?! Im so jealous!!! :merli:

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/506/#findComment-4162741
Share on other sites

Yeah but there was one nice BMW there........white with helmets on the roof

Oh! I didn't cya there! :merli: Only walked around for about 15 minutes

Edit: Spotted - me nearly being run over by a P plater in front of the NCC!! Aiee... he wasn't paying attention, locked it up and only stopped 2m short! Farrrrrk.

Edited by sl33py
Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/506/#findComment-4162834
Share on other sites

I saw 4 skylines on the way home from work today,i followed a silver 33 from my driveway at work, a black 32 gtr with a carbon bonnet heading out of fyshwick, a maroon 32 heading up erindale drive who beeped at me(sorry i didnt wave i wasnt sure if you were giving me the finger or waving,if you were giving me the finger disregard my apology lol) and finally a white 33 gtr heading up erindale drive about a minute after the maroon one, very busy day!

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/506/#findComment-4163399
Share on other sites

I saw 4 skylines on the way home from work today,i followed a silver 33 from my driveway at work, a black 32 gtr with a carbon bonnet heading out of fyshwick, a maroon 32 heading up erindale drive who beeped at me(sorry i didnt wave i wasnt sure if you were giving me the finger or waving,if you were giving me the finger disregard my apology lol) and finally a white 33 gtr heading up erindale drive about a minute after the maroon one, very busy day!

I drive to and from fyswick monday to friday at 0700 and home at about 5 ish I wave to every skyline i see and i dont get any respons i guess people do not know what a DR30 rsx looks like I now have a black bonnet and a black rear wing the rest of the car is white and I usually drive on the speed limit so if your going slow its probably me in front not that the old girl is slow it is the fact there is no traction in the first three gears. so what color is your skyline

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/506/#findComment-4163679
Share on other sites

I drive to and from fyswick monday to friday at 0700 and home at about 5 ish I wave to every skyline i see and i dont get any respons i guess people do not know what a DR30 rsx looks like I now have a black bonnet and a black rear wing the rest of the car is white and I usually drive on the speed limit so if your going slow its probably me in front not that the old girl is slow it is the fact there is no traction in the first three gears. so what color is your skyline

its a black 32 gtr with a sau sticker on the back window,i havent seen yours around, where abouts do you work in fyshwick?

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/506/#findComment-4163876
Share on other sites

haha nice work Kat... a bit of sweet talking works wonders hey! :D :D

my friend, the lovely Ms Kel on these forums is driving it tomorrow... and not just round the block... from Syd to Melbs! omg how cool would that be!

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/506/#findComment-4164316
Share on other sites

I drive to and from fyswick monday to friday at 0700 and home at about 5 ish I wave to every skyline i see and i dont get any respons i guess people do not know what a DR30 rsx looks like I now have a black bonnet and a black rear wing the rest of the car is white and I usually drive on the speed limit so if your going slow its probably me in front not that the old girl is slow it is the fact there is no traction in the first three gears. so what color is your skyline

I work down near the fyswick markets in a metal fabrication shop Its called mag welding the driveway is opposite the salvo's up in the back of the complex

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/506/#findComment-4166191
Share on other sites

Thats a nice smooth curve Gus, it must have pretty linear delivery.

Looks like its running a bit rich at high revs (safer than running lean though) and by the looks of the top of the curve you might need to re-gap your spark plugs down to .8mm cos it looks like its blowing out the spark at peak power.

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/506/#findComment-4167841
Share on other sites

Thats a nice smooth curve Gus, it must have pretty linear delivery.

Looks like its running a bit rich at high revs (safer than running lean though) and by the looks of the top of the curve you might need to re-gap your spark plugs down to .8mm cos it looks like its blowing out the spark at peak power.

only mods are exhaust, pod, and ed said it was running around 10 psi (no bleed valve )

the blue line was first...running rich as fark....the second was with a new o2 sensor...runs heaps better now. was ridiculous how rich it was running down low.

only problem was trying to find a new ecu now to give it a tune...ed told me about this nistune thing but i duno...dont want something only 1 tuner can do...would much rather a power fc...but ha trying to find one of them.

unjfortunately the exhaust temp light still comes when its hot on which is annoying...need to take it back to ed and see if its something else thats faulty. makes it non fun to drive.

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/506/#findComment-4168705
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...