Jump to content
SAU Community

Recommended Posts

Inline did my rack bushes... Which ended up putting my HICAS way off (weird feeling it coming on in a straight line!). So I had it removed or rather locked with a Tomei kit... I thought it made the steering heavier, particularly at lower speeds, but decided it was in my head LOL. Now I'm not so sure!

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/619/#findComment-5197101
Share on other sites

You need the fins removed from the rear section of your ps pump

Inline did my rack bushes... Which ended up putting my HICAS way off (weird feeling it coming on in a straight line!). So I had it removed or rather locked with a Tomei kit... I thought it made the steering heavier, particularly at lower speeds, but decided it was in my head LOL. Now I'm not so sure!
Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/619/#findComment-5198635
Share on other sites

Spotted a black R33 GTS-T turning into Mitchell from Gungahlin Drive this morning.

And further down spotted what looked like a purple R33 of some description. Couldn't see the whole car with the big grey wall in the middle.

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/619/#findComment-5201014
Share on other sites

not an easy job. best done when the turbos are off (that;s when I did mine). when you are doing it, its best to remove the enitre rear pump wheel that holds the fins, the rear steering lines and the Hicas controller that sits on the chassis rail under the plenum. you'd e surprised the difference this makes when changing an oil filter!

the steering loading up can be caused by the steering wheel not being aligned properly with the locator, or you may need to reset the system (process of reversing a couple of meters, then the same forward - there is a DIY on here somewhere).

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/619/#findComment-5201035
Share on other sites

Spotted the Purple R33 turning into Mitchell! And spotted me driving my Grey / Black R33 in traffic on the GDE!

Spotted a black R33 GTS-T turning into Mitchell from Gungahlin Drive this morning.

And further down spotted what looked like a purple R33 of some description. Couldn't see the whole car with the big grey wall in the middle.

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/619/#findComment-5201130
Share on other sites

Passed a black 34 at the bottom of Coulter Drive on Sunday night ~11.50pm... they pulled off into Weetangera afterwards. Anyone on here? :) Didn't think to look if it was a GTR or not, but I'm curious!

Yeahh, that was me, its a GT-T :D you were the Grey 33 right ?

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/619/#findComment-5204017
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...