Jump to content
SAU Community

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Re: Tree-hugging ^^^

Sh-h-h-h-h-h-h-h. VNs are very very smart!

They even recognise wooden telegraph poles as being (former) trees - and hug them too.

They even recognise aluminium light poles as NOT being trees - so they run right over them.

god there is sooooooo much VN hate on this forum!

Yeah they can be a bloody hard car to drive to its limits (I used to own a modified SS), but trust me the Skyline was sooo much easier to drive after it, it takes real skill to throw a VN sideways and not hit things, even with an LSD and lowered suspension! That said there are a lot of horribly loud V6 ones around, but they do do mean skids for what they are, and kids love skids!

VL's are actually a worse handling car FYI, especially the Calais.

god there is sooooooo much VN hate on this forum!

Yeah they can be a bloody hard car to drive to its limits (I used to own a modified SS), but trust me the Skyline was sooo much easier to drive after it, it takes real skill to throw a VN sideways and not hit things, even with an LSD and lowered suspension! That said there are a lot of horribly loud V6 ones around, but they do do mean skids for what they are, and kids love skids!

VL's are actually a worse handling car FYI, especially the Calais.

I see the main hate against them is not actually the car itself, but the general demographic that drive them. Cheap rwd car that pulls a skid, easy to throw lots of power into them with the right engine choice. Lacking handling but once again it was produced to be used as a family car. Nice big barge to cart the family around in. Also, most VN people seem to be into skids and straight line stuff.

I find the same thing with my 1999 VS Statesman. It is good for its designed purpose. Its a bit like a gts and a gtr. It can be made to compare to a much sportier car. But you will always be playing catch up.

seen a VN accident a few months back..in a 60 zone, mid afternoon.. somehow this young VN driver had managed to get airbourne enough hit a van carrying 2 people in the windscreen..

Needless to say they guy from the van was on the side of the road in severe shock after being hit in the face by a VN

The VN was laying about 50 mtrs up the road with the whole rear end, diff and all sheared off from the window back, laying in somebodies front fence... the guy was still sittin in it looking quite dumbfounded as to why the back of his car was so low..

.no doubt he felt cool for a moment.

Was quite a sight,i have no idea how the hell he done it

Also that family that ran into the truck yesterday....nudda VN...VP actually...there fun to drive but id hate to crash one..deadly

god there is sooooooo much VN hate on this forum!

Yeah they can be a bloody hard car to drive to its limits (I used to own a modified SS), but trust me the Skyline was sooo much easier to drive after it, it takes real skill to throw a VN sideways and not hit things, even with an LSD and lowered suspension! That said there are a lot of horribly loud V6 ones around, but they do do mean skids for what they are, and kids love skids!

VL's are actually a worse handling car FYI, especially the Calais.

hmm....Dont know about that. I have had a VL and also a VK as well as 2 VN's...I still think the VN's are more dangerous. VN's seem to have a higher level of grip and then they just totally let go of the road and spin out. VL's and VK's seem to have a lower traction threshold but seem to have a lower centre of gravity and are more progressive when they do let loose....my 2c

Stock for stock VN's are more of a boat IMO, especially with cheesecutter tyres, an oversize steering wheel and a fair amount of low down torque, modified, VL's just seem to feel 'loose' to me, never been in a properly modified full house VL though.

Plenty of info out there about VN/VP 'Clunk' with any problems assoc with rack, bushes, loose struts, bendy arms yaddayadda

I loved the 'look' of the SV5000 in racing green, but 'forewarned = forearmed'

Yeah I always wanted an SV5000, but SS $5k vs $15k for an SV 5000 :rant:

I have seen one, owner used it to transport his dogs and tow a boat :facepalm:

Yeah they can be clunky with worn suspension components, I got all my bushes changed to Nolathane ones for around $300! Wish the Skyline was that cheap haha

the poblem with the VN isn't the car itself, its the price of the car (can be bought for unde $1000) and the type of peson who drives any car bought fo under $1000.

as for suspension issues, what do you expect for a 20 year old car than on average has driven atleast twice as far, on worse roads that it's jap equivilant, the r32. come and look at some of the s13's and r32's getting round gympie and you'll start to think that some of the vn's you see are clean. i saw a s13 the other day at my mates workshop that had coilovers in it with both front camber tops adjust fully to the left and the camber was still out (needed more adjustment to the left), had play in both front wheels, had a rust hole under the drivers side door sill you could nearly fit your hand through, headlights held in by zip ties, same with the front bar, radiator and cooler, front left 1/4 panel also had some zip ties tolding it on at the bottom, miss matched wheels, half melted rear bar from the exhausts (twin 2.5" that stuck out about 25cm past the back bar, also had no mufflers at all), painted dodgey in matt camo colours with a spray can, and an oil leak and radiator leak. needless to say that it had been defected the night before and was in to get a bit of work done (although all i think he was getting my mate to do was to change the exhaust and wheels).

as for the sv5000, there used to be one getting round town here. also a sv3800 and both a VL and VN formula. the VL got written off by the guys brother though when he rolled it about 6 times into a paddock

if there was no VNs, people would find another car similar to do similar things in. now, you claim speed bumps would help, might reduce it a bit however VNs aint imports, you dont go over a speed bump @ 5kph in a VN. since i still drive a VN (only a week to go before s14), speeds bumps @ 50kph isn't too bad, tried 70kph before, that was a bit of a bump and yeh, suspension wouldn't last doing that either.

clearly in this story the car isn't to blame, the drive had been drinking and the driver was 15 so i doubt the car would have mad much for a difference.

VNs are commonly totaled for a few reasons. 1) common. 2) the worst security ever (crime stats put VNs as the most stolen car of 2008 in vic). 3) cheap, can be had running for $500-$1000 4) somewhat light for the cars size (tare 1.4t) with v6 and rwd. no supercar but powerful enough to do stupid stuff with.

the suspension isn't the worst in the world, driven my friends old excel (mid 90s) and that car is unbelievably bad. also, the driver should know how to drive, how the car handles and not attempt to follow a skyline or pretend it is and take the corner at double the limit. the car handles poorly but it's not like you wont notice as soon as you start driving it, thus the drive should take corners slower etc. cant blame the car for driver error. you wouldn't attempt to go fast around corners in a van or truck, neither should you in crappy old cars.

in the end, be thankful it was a VN and not a skyline or another import cuz the media would have blamed the car no doubt.

edit: forgot to add, vn brakes are shocking.

Edited by Peter89

the other thing to remember is that a majority of vn's etc have usually done well over 300,000kms by now and for the last 150,000kms probably haven't had anywhere near the amount of servicing they actually require. that is why they all seem to noisey, etc. most of them are probably still running stock/factory fitted suspension, etc, so you can't expect them to still be like new.

Most R32's I've seen are still running original engines and suspensions with god knows how many k's as well marc :ermm:

When I sold mine it had done 380k, 80k since engine rebuild, the paint was starting to peel for the second time (had been resprayed before I bought it), lasted well in fact.

mine is coming up to needing bushes replaced which is fair after 20 years of use lol.

but how many kms has the average 32 done compared to the average vn, and what sort of road condition have they been diven on. the average australian road would be much worse than the average japanese road, plus the fact that the commodores and falcons cost less to buy in the first place.

its a case of anybody's guess marc since nearly all have had odometers wound back. Also the mechanical side of a VN is hugely simplified compared to the R32, its like comparing a Model T Ford to say a 60's Cadillac with all the fruit. Simple = easier to maintain.

The wife and I were out there today considering putting in a hedgey garden out the front with the plants hiding Metal Bollards in concrete for a bit of extra protection. (She been scared this would happen for over a year now.)

That's a very good idea Luke! :ermm:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • New CAS just turned up from NZ Wiring. Looks like a nice bit of gear.  So, yeah. Triggered, bro. Realised I may as well do the cam belt while mucking about with it so will order one of them.
    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
×
×
  • Create New...