Jump to content
SAU Community

Recommended Posts

OK, so time to get ready for the first round of the Sprints next week, thought i better pull thumb out of my bung hole and get a few things done to the R35. I've primarily made an effort to host these pics for the USA guys (who may be a bit aprehensive of playing with their GTR) not to mention pulling bits off / replacing bits etc....

So here we go, let's get some maintenance underway... we need the car up on stands,,, lets get this big bitchola up in the air...

Using trusty "mini-ramps" (thanks Dave) lift the front end...

001.jpg

Once the front end is lifted with the mini-ramps, get your floor jack under the front jack point (right behind the oil train port as per below..

002.jpg

Lift that sucker way up, ready for your stands...

003.jpg

Position your jack stands at the side jack points, left and right (fronts)

004.jpg

You may need to bring the car down slowly to make sure you have the jack stands positioned properly. You want to end up with something like this..

005.jpg

Now with both left and right (front) in the air, get your jack stand positioned under the rear centre jack point (just under the rear transaxle) such:

006.jpg

007.jpg

Lift the GTR up, position the jack stands just like at the front and lower slowly until you have it all positioned correctly on the rear jack points..

008.jpg

You should end up with something like this, ready for some well due maintenance..

009.jpg

010.jpg

I've found this is the best way to go about it, assuming you are doing this in your own garage.

Now.. let the games (and skinned knuckles) begin..

012.jpg

So... moral or the story is, give it a go,, it's just a car after all, and fark the warranty, fark it right in the eye with a blunt dick i say.

(more to follow)

Link to comment
https://www.sau.com.au/forums/topic/303133-my-r35/
Share on other sites

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

good to see . nice plate too

got a list of things your doing to it ? or do we have to wait and see

replacing most fluids (pretty hard to get to front diff!), installing new titanium exhaust (*in pic), some new diffuser blades, some carbon fibre intake snorkels, and a few other things. yep there are heaps of covers under there,took my an hour or more to screw around getting them all off, half the battle. pita. the creeper makes things a LOT easier too.

Link to comment
https://www.sau.com.au/forums/topic/303133-my-r35/#findComment-5025171
Share on other sites

I'm loving the look of that Exhaust.

BTW those mini-ramps are ingenious. Ive never come across them before. Where abouts can you get them? Ive always used a scissor jack behind the wheel to get it high enough to slip the jack under.

Looks like some pretty good design under there regarding aerodynamics. Must be a pain taking it off to do any work though.

Link to comment
https://www.sau.com.au/forums/topic/303133-my-r35/#findComment-5025495
Share on other sites

I'm loving the look of that Exhaust.

BTW those mini-ramps are ingenious. Ive never come across them before. Where abouts can you get them? Ive always used a scissor jack behind the wheel to get it high enough to slip the jack under.

Looks like some pretty good design under there regarding aerodynamics. Must be a pain taking it off to do any work though.

I think you can buy them at most caravan dealerships (the mini-ramps) believe it or not. Otherwise a block of wood might do instead.

Link to comment
https://www.sau.com.au/forums/topic/303133-my-r35/#findComment-5025510
Share on other sites

I think you can buy them at most caravan dealerships (the mini-ramps) believe it or not. Otherwise a block of wood might do instead.

Wow, you learn something new everyday... Who would have thought a caravan shop would have something that is actually usefull?

Can also get them from ebay too for those (like me) that wouldn't know where to begin looking for your local caravan shop :happy:

Link to comment
https://www.sau.com.au/forums/topic/303133-my-r35/#findComment-5025532
Share on other sites

wow good to see someone who is not afraid to give it a go.

also did you start her up without the exhaust??? lol

Good point, but I think they are fine, all I am really worried about is it falling on me whilst working under the car itself (!). It's a good idea to use the floor jack too, under the central jack points (front or rear) if you are working under the car. That way you aren't depending on just one stand/point alone.

Link to comment
https://www.sau.com.au/forums/topic/303133-my-r35/#findComment-5027281
Share on other sites

Great to see you having a go doing everything yourself.

Did you have to take the wheels off to put the exhaust on..? :ermm:

Or you doing a brake upgrade as well?

I am doing brakes too so took the wheels off. I think you could do it with the wheels on if you wanted to.

Link to comment
https://www.sau.com.au/forums/topic/303133-my-r35/#findComment-5027588
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...