Jump to content
SAU Community

Recommended Posts

R33 GTR V-Spec's had stiffer suspension + a lower ride height.

An updated ATTESA E-TS Pro all wheel drive system + an Active Limited Slip differential (Active LSD).

Four wheel independent channel anti-lock braking system.

The car weighted an extra 10 kg.

If you're looking to buy an R33, you'll notice many of them are Vspec's anyway. If they're modified (which most of them are to some extent), then the differences between the two models become largely irrelevant.

Are you looking to buy one or is this just a general question?

When purchasing my R33 GTR 8 months ago, I drove both V-Spec and non V-Spec and could not tell the difference, as the non GTR that I ended up buying had Tein Coilovers and there was no difference that i could tell. I presume you might notice a slight difference if you were using it as a track car. that is another reason why I chose the non V-Spec, as it was a little more unlikely to be used as a consistant track car in the past.

I have to say the VSPEC feels a bit stiffer and corners slightly better...besides that, it's just the internal trim and a few other items that are noticable. If it's a huge price difference, I wouldn't bother going Vspec.

I ended up with one as the price was so good for mine. Good luck.

I have to say the VSPEC feels a bit stiffer and corners slightly better...besides that, it's just the internal trim and a few other items that are noticable

Nothing in the interior is different btw the vspec and non-vspec....

R33 GTR V-Spec's had stiffer suspension + a lower ride height.

An updated ATTESA E-TS Pro all wheel drive system + an Active Limited Slip differential (Active LSD).

Four wheel independent channel anti-lock braking system

this man speaks the truth.

Nothing in the interior is different btw the vspec and non-vspec....

this man speaks the truth.

Hey mate...I can only speak from my own vspec GTR...seat trip is better - has purple stitching along the sides and material is different from my mate's GTR. Also, side inserts are different...correct if I'm wrong but from what I've seen those are the differences.

it was just a general question as i had brought a midnight purple r33 gtr v-spec and i was told they had a better diff or something along those lines and a mate was saying there was no difference in them...

yes as posted above the vpsec has the active LSD diff in the rear

if you look underneath your diff will have fins on the cover, normal GTR doesn't have fins

instead of normal viscous LSD its computer controlled LSD

when the computer detects wheel spin (seperate to the AWD computer)

it locks the rear diff and the slip light on the dash will come on

is it better? maybe

mine sucks ass

The main place you will notice the difference is on the track. Last December at Winton I raced both my r33 GTR non Vspec, and also went in an R34 Vspec. The difference in cornering is quite noticable. On hard cornering, my car tends to lock up the inner rear tyre somewhat, but if you set it up right - slow in fast out - it still hauls ass and slingshots out of the corner. In the R34 Vspec it felt like the guy could throw the car into the corner any which way and as long as he kept his foot on the gas the car would just pull itself straight. The Vspec LSDs adjust touque split not only front to back, but also side to side. You can feel the car putting less torque to the inside rear tyre on hard cornering, pulling the car around at warp speed with what appears to be minimum driver effort. I wish I had bought the Vspec, but I still love driving mine.

it was just a general question as i had brought a midnight purple r33 gtr v-spec and i was told they had a better diff or something along those lines and a mate was saying there was no difference in them...

if you plan on chasing power non-Vspec is the way to go... the diff is the strongest of the GTR diffs and can be easily upgraded for more aggressive lock as its mechanical/clutch pack type

The Vspec diff is viscous (fluid) like the GTSt diff and can't really be modified... and as Paul has stated they kinda suck ass;)

ah yeah thats right, i remember ben saying the vspec diff is a bastard to upgrade and its too small to shim inside it or very little room

mine is sometimes the greatest thing ever, other times its hopeless

the only distinct advantage i found with the vspec was it looks like it predicts wheelspin sometimes

i found on the great ocean rd on some of the sweepers if you gave it curry

the slip would come on even though it wasnt actually slipping, almost as if it was predicting wheelspin (from lateral force sensors)

kinda groovey

but otherwise hopeless

i should try and shim it and see what happens

yeah I think for a standard car, or lightly modded they work great... just if your planning to do power upgrades or get serious about track work its best to go for the non Vspec diff

one of the best mods I did for the old car was ditch the standard LSD... it was just unpredictable, made it hard to drive the car fast... but then again it was pretty shagged

must admit I've never driven GTR or GTSt with the active diff so I'm half talking out my arse;)

the seat colour trim is different between series 1,2 and 3

it's not related to vspec or non vspec

the colour purple is series 1 and 2

the colour red is series 3

You are correct paul.

As for my vspec diff, it seems to work great both on the road and on the track....too be honest if I'm cornering hard enough to loose grip in the R the last thing I'm looking at is the dash so I can't really say how often the slip light comes on. It seems the only time they suck is when they are being modified or they break.

  • 7 years later...

Hey fella's

Apologies on bringing up a pretty old thread. But I have purchased / rescued a 1995 s1 none v-spec gtr as it was the only original mnp and completely stock gtr within my reach.

And I am curious about the lower/stiffer suspension of the v-spec? Can anyone list the actual differences in the suspension components between an s1 vspec and s1 none vpec?

Thank you!

Congrats on the purchase - these things are only going up in value!

I believe it's a 10mm ride height difference and this should be in the springs themselves. No reason they can't be swapped between the two and any 33R suspension will fit it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wrt the engine, you're very much limited by 'production quality' as to how much extra power you can extract from them (I'm talking i6 red-motor) -- a lot here depends on how 'authentic' or 'period correct' you want the modifications to be... ...I'm too old... <grin>...the first true performance engine Holden made, was in the HD/HR models ~ this was the 'X2' performance pack...it came with twin downdraft strombergs on an otherwise unimproved intake manifold, with a two piece exhaust manifold (reckoned to be as good as extractors)... ....these engines were built upon the '179HP' cylinder block, which included extra webbing in the casting to make it stronger and less susceptible to block distortion... The next performance i6 came out with the HK Monaro (also found it's way into the LJ GTR Torana ... the car I wish I hadn't sold)...it had pretty much the same manifold setup, but was built against the '186S' block...this block retained all the extra webbing of the 179HP block, but added a forged steel crankshaft (instead of the stock cast crankshaft), because it was possible to snap the crank... ...apart from the inherent weaknesses in the stock (cast crank) blocks, the next limiting factor is the cylinder head porting & combustion chamber design, and the actual valve sizes. Back in the day, you could buy a 'yella terra' cylinder head (from stage 1 to stage 5 gradients), and this was the way to get serious power out of them -- with the extra breathing of these heads, you could fit a triple SU or DCOE Weber setup... ...obviously, these mods were a waste of time on a stock cylinder head/camshaft grind. My housemate rebuilt the i6 in his VH dunnydore about 6 months back -- this is a 186S block with the 12port 2850 blue motor head and intake/exhaust manifolds, with a dual throat Weber off an XF Falcon mounted on an adapter plate ; it's not a bad makeup...got more torque & fuel economy just light-footing it about on the first throat, but stand on it and it makes more giddy-up than the standard 2850 blue motor that it replaced. Personal note: I'd just fit an RB30 and be done it it 😃  
    • Thanks for sharing. That's a great video! My buddy is doing the same thing on his build (S chassis struts and towers). He's building an S14 with billet RB30 shooting for 2000whp... a race car with a TH400 just like this video. For a road car I just couldn't go this route as the strut has to be almost vertical and the caster is not going to pivot correctly (let alone camber gain). You think the R32 frontend is bad, wait till you put a MacPherson strut on without modeling it all in Solidworks to check geometry. I'm not saying it's a bad way to do it but I'd be really curious to see how it affects the geometry.
    • Hey Christof and welcome!  Sounds like an awesome project! I'm not sure many of the regular users on here would know much about the HK but I could be wrong.  Looking forward to updates.
    • As long as its NOT a HyperSHITtune, youll be fine.
    • First time visitor and currently getting ready to start work on my HK Premier.  Its all stock, 186 with 3 on the tree.  The only mod i have right now is extractors.  I am hoping to get some guidance on slightly modifying the engine to bring a little more power. Just going for a nice, comfortable cruiser.  The car is very straight, however i have been out of the country for 20 years and its been gathering dust at a family farm.  Will be doing quite a bit of body work to cut out some small rust areas (frnt quarter panels and a few other small bits) and fix up the paint.  Will be redoing the interior (its currently black and the seats are in real need of recovering and respringing the driver side (its front bench seat).  The dash needs a little TLC, but no real damage.  As my heater has degraded I am considering fitting something after-market that will be both heater/AC (recommendations here are always welcome). Wanting something discrete that will allow me to use the same controls and not be obvious once inside the car.   For the engine, i have been told i could consider upgrading my cam (imagine i would need a new head as well) and putting a new carby (currently the original stromberg).  However not sure what is going to be the best route.  Would certainly welcome any comments/suggestions.  As  a final step I am looking at changing the wheels. Current hubcaps are in dire need of refurbishment or replacement (imagine its a bit like hens teeth).  Thinking of some clean/classic looking mags (7-inch should be more than enough - not going for a large change in look).  Welcome any comments/advice and of course any questions. 
×
×
  • Create New...