Jump to content
SAU Community

Recommended Posts

Spotted a black R35 @ Pyrmont on Monday, had flowers in the passenger seat, number plate was "R35 God"

Sexy sexy car

Saw this car today also pulling out of Broadway Shell servo. Very nice.

Spotted White R35 with numberplates "JOE.35R"

No worries I know the owner of this car, it's an import that is for sale ATM, this time saw it in a car yard

  • 2 weeks later...

NICE CAR!!!

SPotted a Black R35 at the carwash on Pennant Hills road @ Carligford (Next to BP) as I drove past, I don't know if it was from only glancing at it for a split second as I drove by or not but it seemed to have an ugly body kit on it???? MAybe my eyes deceive me???

  • Silver in Noojee
  • Silver on Eastern Freeway going toward a Eastlink tunnels
  • Red on Lygon St
  • Black in Port Melbourne
  • Titanium on Kings way
  • Titanium in Ringwood
  • Black on Centerbury Rd Bayswater
  • Titanium with personalised rego GGRRTT or something like that on Canterbury Rd Vermont

Various motoring media report that 260 were sold in 2009, and another 60-70 in 2010 so far, not sure how many JDM's are floating around, but I'm guessing not many.

Edited by rehab2010

Are you kidding? That is why you need the warranty, not when you are posing at the golf club!

I'm talking out of my ass as I am just going off what I have heard from other people, but I thought the ECU logs everything and Nissan voids warranty if it is driven too hard???? Or was that just for LC?

  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...