Jump to content
SAU Community

Where To Buy A Turbo From?

usmair

By usmair,
in Engines & Forced Induction

 Share

Recommended Posts

usmair Mentor

usmair

Posted
Posted

Hey guys

so ive been informed by my tuner that my GT3071R is on its way out... and he has highly recommended that I buy another turbo because my current one will not last longer than a few weeks... He doesnt believe (and I agree) that we should rebuild the current one as it will not be feasible

So I'm now after an internally gated GT3076 (figured might aswell try to get some more power if im gonna spend all that money)

tried to do a search on here but im getting like 24 pages of results so yeah

since I bought my turbo 2nd hand off a guy on SAU, I have no clue where to shop for turbos

besides nengun and ebay the only place I've found is www.tweakit.net

I could ring around turbo shops like GCG and all that, but does any one have any websites that I can go to compare prices?

Cheers

U

Link to comment
https://www.sau.com.au/forums/topic/304595-where-to-buy-a-turbo-from/
Share on other sites
hypergear Grand Master

hypergear

Posted
Posted

If your turbos is still making boost without too much noise its lot cheaper to just get it rebuild with a new set of Garrett bearing kit which will cost only $660 assume your stock wheels and housings are in ok condition.

We will email you a inspection report before starting any work. So you know what you will be paying and why your turbo has failed.

Parag0n Mentor

Parag0n

Posted
Posted

Can vouch for Horsepowerinabox http://www.horsepowerinabox.com/, established company been around for ages, plenty of their turbos in some great machines.

I prefer to buy from a company thats been around for a while, last thing you want is something with an ebay knockoff in it.

If you want to rebuild your turbo I also reccomend GCG http://gcg.com.au/

Ruff Ryda Contributor

Ruff Ryda

Posted
Posted (edited)

Rebuilds are expensive unless it's just bearings is that right? I was under the impression ball bearing turbos weren't worth doing anything to once they start to get play. It's usually cheaper to just buy another one.

Also a GT3076R internally gated can be done. To open it up properly an exernal gate on a high mount would be better though. What turbo manifold you running? What's the size of the engine? RB20 I would recommend the 0.63 A/R @ 21 PSI but an RB25 could take the 0.82 A/R @ 24 PSI with the extra displacement.

As for turbo purchases these sites listed already are the ones I know of unless you go on another forum hunt.

Edited by Ruff Ryda
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

^ Nope.

It's 100% cheaper to rebuild. The Garrett cartridge itself is around $1000.

Add in balancing and refit, you're saving at least $500. You get to use toye housings, and wheels again.

Send it to GCG for the rebuild, they have the best equipment in the country.

They will also be able to provide reasons why the turbo has become tired/worn in the first place - and IMO this is the [/b]most important thing to know.[/b]

There is no reason a ball bearing turbo should fail without a ridiculous amount of KM's on it, or extremely poor car servicing routine.

usmair Mentor

usmair

Posted
  • Author
Posted

wow thanks for the reply guys, will definately enquire about rebuilding the turbo...

when i gave it to the tuner, it was making boost just fine, but was just taking forever to hit full boost (was getting full bost at like 5500RPM, something to do with a leak near the wastegate) so when he took it out to get it bushed, he got a "turbo expert" to look at it and he said it was about to go...

so Im gonna have to stop by and see whats actually wrong it it.

its a GT3071R, and it made 260rwkw

stupid question, but can I hiflow it or getting bigger internals for the turbo...

wanted to hit my goal of 275rwkw (i know its only a number but I feel like I didnt meet my objective)... might as well give it a crack while the turbo is out

GCG are probably the best ppl to talk to about this right...

Ruff Ryda Contributor

Ruff Ryda

Posted
Posted (edited)

I'll assume it's an RB25DET according to your pic. If so you sohuld be able to hit over that figure with step 1 cams (290 RWKW or so?). The GT3071R is a great turbo for response and power and work better with cams. Get some step 1 cams so you keep VCT too :P. Get a set like these:

http://www.nengun.com/hks/camshafts-nissan

They drop right in, keeping VCT and no need to upgrade valve springs unlike the larger step 1s such as JUN or Tomei. Get a Rocker Arm Stopper kit just in case for another $80 and you're set.

Good luck.

Edited by Ruff Ryda
R31Nismoid Grand Master

R31Nismoid

Posted
Posted
wow thanks for the reply guys, will definately enquire about rebuilding the turbo...

when i gave it to the tuner, it was making boost just fine, but was just taking forever to hit full boost (was getting full bost at like 5500RPM, something to do with a leak near the wastegate) so when he took it out to get it bushed, he got a "turbo expert" to look at it and he said it was about to go...

so Im gonna have to stop by and see whats actually wrong it it.

its a GT3071R, and it made 260rwkw

stupid question, but can I hiflow it or getting bigger internals for the turbo...

wanted to hit my goal of 275rwkw (i know its only a number but I feel like I didnt meet my objective)... might as well give it a crack while the turbo is out

GCG are probably the best ppl to talk to about this right...

get a dyno sheet to read 275rwkw mate, same thing. As honestly to get hung up on a number is stupid.

One dyno will say 260, the next will say 275. So who cares?

Rebuild it as is, or be prepared to hurt response by going to something bigger.

As for CAMS - they will not magically get you to 290rwkw, so i totally disagree with the post above this.

I made 370rwkw through factory RB25 CAMS. Same as Guilt-Toy has done with a 25/30 and a GT35.

They are not a problem.

wolverine Grand Master

wolverine

Posted
Posted

Cam haters. ;)

I'm not sure who thinks they magically add power........ :D

I reckon there is about 10-15kw going to 256 deg poncams but whether it is worth it is an entirely different question.

I would rebuild the turbo, re-tune and be happy or spend the extra money on buying a GT3076 if you want a bigger number.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Yet another RB Neo misfiring thread after reading all the others.

      By Dose Pipe Sutututu · Posted

      Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • GTSBoy
      Yet another RB Neo misfiring thread after reading all the others.

      By GTSBoy · Posted

      Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      House of Fatz dry dock needs a clean sadly one of the long time stables is leaving this weekend   see ya mr purple
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Hence why I've only modified my car into a pure daily. Everything has to remain reliable & roadworthy, while providing value and grin factor. It also must not be handcrafted to the extent that the car will be immovable if something breaks because you cannot get or make a replacement to at least limp around with.
×
×
  • Create New...