Jump to content
SAU Community

Recommended Posts

  • Replies 211
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

and the bay and where ever else i got but any way im still young^^

So I take it you are from Adelaide? since it looks as though it's got SA number plates also.

You say your young, but where abouts have you run an 11 second quater? We haven't had a running 1/4 mile track anywhere near Adelaide for around 5 years. Plus 250kw on a standard turbo (somehow??) in a boat like R33 doesnt really add up to an 11second pass.

I have a book about how to tune i read it and just add some thing else and still runin stock turbo :) took all stuff out of my boot u can do an 11 sec pass with 200rwkw all really need is a good set up

Ok, the "book" you are reffering to is the issue of HPI when they talk about doing an 11 second pass on a RB25 Skyline and how to achieve it.

First thing's first, if you are running the stock turbo with a great tune, good amount of boost and everything else is up to scratch you will be running around 200rwkw if your lucky.

Depending on your mods (ie if your car doesnt have a tune you have no hope) you could be anywhere from 170-200rwkw. So your figure of 250rwkw is WAY out.

Second that HPI issue was a bit missleading (probably possible, but very few cars perfectly setup can do such a thing, way to many variables), most stock turbo

skylines with a tune and good setup crack into 13 second passes. Yours would most likely would be in the 14's, so once again, way off 11 seconds champ.

Not trying to hang shit on you mate, just trying to educate you a bit so you don't go around saying stupid things.

Edited by PM-R33
So I take it you are from Adelaide? since it looks as though it's got SA number plates also.

You say your young, but where abouts have you run an 11 second quater? We haven't had a running 1/4 mile track anywhere near Adelaide for around 5 years. Plus 250kw on a standard turbo (somehow??) in a boat like R33 doesnt really add up to an 11second pass.

1st my mate drove it down 1/4 went to syd for the week whn i 1st got it 11.79 and now its defected all back to stock and wen you strip it seats/boots jack other stuff made 247kw and with boost and as you noe most mods i hve spent over 38ganrd on the car i noe what ican do

1st my mate drove it down 1/4 went to syd for the week whn i 1st got it 11.79 and now its defected all back to stock and wen you strip it seats/boots jack other stuff made 247kw and with boost and as you noe most mods i hve spent over 38ganrd on the car i noe what ican do

:)

1st my mate drove it down 1/4 went to syd for the week whn i 1st got it 11.79 and now its defected all back to stock and wen you strip it seats/boots jack other stuff made 247kw and with boost and as you noe most mods i hve spent over 38ganrd on the car i noe what ican do

oh and maby i said it when we ha 246kw we turned the bosst up and the rev limter so we where killing the motor

1st my mate drove it down 1/4 went to syd for the week whn i 1st got it 11.79 and now its defected all back to stock and wen you strip it seats/boots jack other stuff made 247kw and with boost and as you noe most mods i hve spent over 38ganrd on the car i noe what ican do

There is not 38 grands worth of car there

I also know what a stock turbo'd R33 is capable of and it definently not 250rwkw and most definently not an 11second 1/4

Edited by DR JOSH
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...