Jump to content
SAU Community

Recommended Posts

Hey guys, this is my first post so hello. I thought I'd join up on this site and get some good GTR info as well as post up the bits I have here and there. Moving on then. So here's my little paint project. Originally when I took delivery of the car, the front bumper had some slight damage on it. I was just going to repaint it silver, but somewhere along the way, I was asked by a close friend if they could try their hand at it. I knew this only meant things would get out of hand but I said okay. The artwork is by Allison La Valley of Lost Birds Art Studio (Portland, OR, USA) The car is in Misawa, Japan, where so far about 30 hours have gone into this. The plan is to finish the whole car by the end of February, so that will leave me time to build up the engine, etc before racing starts. I know some are going to hate that I allowed this, but remember it's just a car and as a matter of fact, there are 10s of 1,000s more just like it. Updates as they come!

pictures of the work so far.

Passenger Side Skirt

DSC_0016.jpg

DSC_0019.jpg

Driver Sideskirt Started

DSC_0034.jpg

mirrors

DSC_0038.jpg

DSC_0046.jpg

Rear

DSC_0041.jpg

Front

DSC_0036.jpg

DSC_0044.jpg

DSC_0042.jpg

The work goes on.....

Link to comment
https://www.sau.com.au/forums/topic/306096-lost-birds-r33-gtr/
Share on other sites

i think it doesnt look too bad from a distance, especially the first shot of the front bar

however i myself having a slightly similar car, picturing that shit drawn all over it makes me cringe!

though as said above, each to their own

istdercollen: That is super cool. Not to many people have the balls to take a sharpie to they're car. It's hard to stand out with a skyline these days.... Well done!

I cant wait to see the whole car done.

I've seen the Lambo around Miami... It's very unique, but if you get close- the detail is a little rough.

Looks very different, mate! And she's very talented! Good work.

Although it'd be difficult to get to, doing the roof would look fantastic.

The roof will be last but it will get done for sure! Here's a cell pic of the current state of my living room. Haha.

3fe548ea.jpg

istdercollen: That is super cool. Not to many people have the balls to take a sharpie to they're car. It's hard to stand out with a skyline these days.... Well done!

I cant wait to see the whole car done.

I've seen the Lambo around Miami... It's very unique, but if you get close- the detail is a little rough.

thanks for the props! Most people seem to think it's neat. No one has said it sucked to my face yet. Lol. Honestly the reason I decided to do it was because I didn't want a silver GTR at all. I couldn't get my hands on a Midnight Purple so I settled for what was easy to find set on repainting it from the first moment. I thought that I might as well let Allison do her thing and if it sucks then repaint as originally planned, no harm done. So that's the mindset.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...