Jump to content
SAU Community

Recommended Posts

Had an awesome time! racing at night really ads a new perspective, i love and i think we should do it more often!

i was stoked with the 1.13.5 i ran with my little stock s2000.

now im just pumped for when i get the GTR back on the road! :)

  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

i was in group 6.

sorry to here about your brake dramas, calder is always pretty hard on them.

did anyone else think that the guy in the black BMW M3 with the load exhaust was a complete wanker? he past me on the freeway on the way home after the event, and it was like he was still on the track! he was driving at full noise, ducking and diving between the traffic. im sorry, but ive got no time in the world for idiots like that! what a looser!

(just my 2c...)

yeah Roy it's back to stock now.. I've sold a lot of parts but kept a few bits for my next track toy... but it's a shame just when the car was all sorted for punching out some quick times I split an oil cooler hose and dumped half my sump oil around philip island.. after that I just had enough and made the decision to sell everything. I'm working on a new project which will be a lot of fun when it's finished later this year :cool:

wow, i know you had a run bad luck with the car, but i cant belive that you can let something as minor as that get to you so much that you sell off the car! you had a real good thing going there. but at the end of the day its your decision and i respect that.

its good to hear youve got another project on the cards. dare i ask, whats the new project? :cool:

bye the way, has anyone got pics from last night? i noticed there were a couple of people on different corners with cameras.

had a great time, luckily no dramas with the car apart from some tired tyres. would have liked to get a few more sessions in but otherwise well organised event.

hanging to check out the night pics.. u keep stalking that forum john hehe :cool:

Had a ball!! :cheers:

Thanks to everyone involved with running the event - considering the amount of entries we were never going to get the amount of track time that I've become used to, but it was run very well.

After not doing an event at Calder for ages it was good to see that some money had actually been spent at the place. I was hoping for a lap time in the 1min 5sec bracket but with the traffic and cobwebs I could only manage a PB of 1:06.02. Considering that was at night I have no doubt that a 1.05 is possible in my car. Sorry to hear about peoples mechanical/electrical issues and I hope that it was nothing too serious.

Hopefully someone with a camera there managed that elusive shot of a black car with glowing brake rotors :D

yeah Roy it's back to stock now.. I've sold a lot of parts but kept a few bits for my next track toy... but it's a shame just when the car was all sorted for punching out some quick times I split an oil cooler hose and dumped half my sump oil around philip island.. after that I just had enough and made the decision to sell everything. I'm working on a new project which will be a lot of fun when it's finished later this year :D

New project...have you gone homo with a GTR? :cheers:

Had an awesome time! racing at night really ads a new perspective, i love and i think we should do it more often!

i was stoked with the 1.13.5 i ran with my little stock s2000.

now im just pumped for when i get the GTR back on the road! :D

I absolutely LOVE the induction noise from those little 2lts. I was flagging at teh end of the front straight in the arvo, and on downshift throttle blips I was in heaven, not to mention between turns 1 and 2 where you were royally up it at one stage. Sounds fantastic @9k rpm :cheers:

Yeah was good fun, my best of a 1:10 was with (what I hope) dodgy coil packs,

started loosing power up high b4 I jsut started missing on heavy acceleration.

oh well new ones here tomorrow, bang em in and see how that goes.

Never seen so many cameras at one track tho.

Other than the mechanical issues. I ahve to say was not overly impressed with the grouping for the night.

granted not many people ahve had a chance to run Calder b4 to give a time estimate, but when there is 20+ sec difference in lap times within a group on a 60sec ish track, made it very hard to put in a clean lap.

that said, I ahve unfinsihed buiness with this track now!

I absolutely LOVE the induction noise from those little 2lts. I was flagging at teh end of the front straight in the arvo, and on downshift throttle blips I was in heaven, not to mention between turns 1 and 2 where you were royally up it at one stage. Sounds fantastic @9k rpm :cheers:

Im glad i could entertain you, i must admit the old Vtec doesnt sound too bad in full song.

i was having a bit of trouble with oversteer throughout the day/night. the back was stepping out constantley! :D

Had an awesome time! racing at night really ads a new perspective, i love and i think we should do it more often!

i was stoked with the 1.13.5 i ran with my little stock s2000.

now im just pumped for when i get the GTR back on the road! :)

Hey mate, I was running in your group and was really impressed with the S2000, was bloody quick for a stock car!

richo, how do you fall under standard RWD? I'm, intrigued! :huh:

the car is standard as per sau vic rules.

engine, inj, fuel pump are stock. turbo is highflow, only coz the damn thing blew at winton. running street tyres.

vssc is allowing r-comp for standard class... :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...