Jump to content
SAU Community

Recommended Posts

Food, Beer, Talks, People, Cars, Beer and laughs!

These social meetings are divided into two parts, the first if your hungry is a meal from the bistro and a chance to have a chat with other members then the second is a short informal meeting.

We use these meetings to give quick rundowns on past events with video's, pictures and stories etc, to address pressing matters, tell members what's happening behind the scenes and for discussion on upcoming events. It's all pretty relaxed and fun. This is a great opportunity for those of you who don't know too many members to come down and mix as new faces are always welcomed.

Time - 8.00pm start, dinner from 6.30 ish

Date - Tuesday 16 March 2010

Location - Bell's Hotel, 157 Moray St, South Melbourne (Cnr Moray St & Coventry

St Melways Ref - 57, G1)

Note - This Pub is family friendly with an area set aside for us. There is plenty of seating (tables and chairs) and meals for all.

Who is welcome - Everyone!

UPDATE:

GUEST SPEAKER

Will Day will be guest speaking (thanks Pat for organising).

Here is a bit of a run-down of what he will be chatting to us about, he spent a lot of time with Nissan in the Test & Dev in the era of the R32 GTR :D

1. In production – We were still building R31 Skylines (including SVD) together with Pulsars and Pintaras when I was in manufacturing.

2. In development – I was in the test group for the whole development program of the N14 Pulsar. We also did the local certification of the R32 GTR and can explain the local mods that were made.

3. Spare parts support – Some of the horror stories for ongoing supply of spares, particularly on low volume specials like the GTR and SVD Skyline GTS.

MERCHANDISE

- Let me know if there is anything you would like me to bring along for you to look at.

Hope to see you all there.

:down:

Link to comment
https://www.sau.com.au/forums/topic/310433-general-meeting-tuesday-16-march/
Share on other sites

Im expecting to see a lot of new faces at this meeting.

I will run a pre meet in the SE if someone will put there hand up to put a pre meet together in the West

and we will meet up at South Melbourne at the Meeting.

This would be a great way for all you people that want to go but not keen on turning up alone.

I will post tread in Events section.

Cheers

spose i could come.. although i dont know there is many paid members from west? so wouldnt be much of a premeet or can anyone attend this stuff?

Yep, anyone and everyone is welcome.

Alot of people aren't aware of this...Bec does write it in the subtitle and body of the original post, but maybe we need to promote it more?

UPDATE:

GUEST SPEAKER

Will Day will be guest speaking (thanks Pat for organising).

Here is a bit of a run-down of what he will be chatting to us about, he spent a lot of time with Nissan in the Test & Dev in the era of the R32 GTR :laugh:

1. In production – We were still building R31 Skylines (including SVD) together with Pulsars and Pintaras when I was in manufacturing. I could speak a little about how good (or bad) these cars were to build.

2. In development – I was in the test group for the whole development program of the N14 Pulsar. We also did the local certification of the R32 GTR and can explain the local mods that were made.

3. Spare parts support – Some of the horror stories for ongoing supply of spares, particularly on low volume specials like the GTR and SVD Skyline GTS.

I think this will be quite interesting - make sure you come along!

Ive managed to pull a fair bit of strings at work and have managed to talk my boss into coming down to the meet as a guest speaker.

He used to be a test engineer at the nissan manufacturing plant in Victoria and then became Engineering Manager, National Parts Division.

This was during the late 80's to early 90's and includes developing and building the R31 SVD, R32 GTR and N14 Pulsar SSS

He has a load of stories about the build quality of these cars, r32 gtr certification (including test drives and its thrash-ability :laugh: ) and souring spare parts when they broke back in the 90's.

I would like everyone to come as Ive put in a lot of effort to get him!!!!!!!!

Giving you a chance to ask about the R32 GTR when it was released in Australia in mint condition! Dont waste this opportunity!!!!

Back to you Ash :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...