Jump to content
SAU Community

Recommended Posts

Euros are more exxy, but that's because of tarded australian dealers.

this.... is why i said:

(when you buy them over here)

;)

it's all just marketing.... if mercs were as expensive as mercedes aust told you i'm sure they wouldn't be used for every taxi in germany... they are just commo's for the jerrys

how many nissans can do 250K+ and still drive like new without engine rebuilds?

lol you said that on a forum with hundreds of people on 250,000 motors that are putting down twice the factory poweroutput... your agrument fails... hard

how many RB30s are still trucking with 350+ on the clock? shitloads

show me the hundreds of people with 250Ks without doing anything to engine other than the usual 10K service :thumbsup:

I have one of these sitting in my garage. My ceffy. RB20DET, regular services, not boosted, pretty much as it rolls out of the factory other than a pod. Still runs fine and smooth. Coilpacks degraded, changed them out, and now runs butter smooth again.

I've also owned an AE86 with a 4AC that had 420,000km on it, and it ran fine (although, that's a carby engine from the 80's) up until I put 6PSI of boost through it and took it to a track day to flog it. Once that blew, I bought another engine for $50 and swapped it in during the lunch break at the event, that engine had 360,000k's on it... and lasted half a day with similar forced induction carby setup.

go on an m3 forum and see how many of em actually get their cars repaired/serviced at mechanics/dealers. just coz its euro doesnt make it any harder to work on than a jap.

I know plenty of people with expensive euro cars... not one would go near them with a spanner (even though a few, like my old man, are mechanically minded)

reason being: some don't know how, or they spent too much on the car to have to worry about that sort of stuff etc

I agree they aren't necessarily harder to work on, that wasn't my point... all i'm saying is fk all people actually do it themselves, and instead pay through the nose to have it done for them

I have met my match.

Home made arak shot (so strong it's flammable)

Ended up spitting it all back thru my nose + nosebleed, drooling for a few mins non stop and a wikid sore throat as well as having everything in my stomach exit via my mouth.

Shit was f**kED

  • Nope 1

euro's are shit till you get mega expensive.... jap cars are always better bang for buck and that's the problem (when you buy them over here)

it's no good saying a 200k car is better than an 100k car

of course a c63 is better than a lexus ... (LSF would be pretty sweet tho)

also everyone i know that owns BM has been hit with major repair bills for things like altinator fails etc

i wasnt comparing 100k diff i mean

c200 to 3 series to IS series to A4 series etc.

the "luxury" brands cars are wayyyyyyyyyyyyyyy better than the local offerings

I agree they aren't necessarily harder to work on, that wasn't my point... all i'm saying is fk all people actually do it themselves, and instead pay through the nose to have it done for them

From experience working on my mate's M5, Citroen C4, etc, diagnosing a Euro is piss easy as the new generation ones have a fully computerised CANBUS system that tells you everything on a laptop. Maintenance on them is also quite easy.

That said, a couple of years ago I'd have worked on my own cars, but now my spare time is worth more to me so I'd rather pay someone to do it for me, Euro or Jap, even though I have all the tools and knowhow to do it all myself. The fact that people don't work on them you'll find boils down to what they can afford and what they prefer to spend their time doing, and nothing to do with what car they own.

show me the hundreds of people with 250Ks without doing anything to engine other than the usual 10K service :thumbsup:

what like modifying it to make MORE power and stress the engine MORE...

2010-09-30-21-13-37463672918.jpg

I have one of these sitting in my garage. My ceffy. RB20DET, regular services, not boosted, pretty much as it rolls out of the factory other than a pod. Still runs fine and smooth. Coilpacks degraded, changed them out, and now runs butter smooth again.

I've also owned an AE86 with a 4AC that had 420,000km on it, and it ran fine (although, that's a carby engine from the 80's) up until I put 6PSI of boost through it and took it to a track day to flog it. Once that blew, I bought another engine for $50 and swapped it in during the lunch break at the event, that engine had 360,000k's on it... and lasted half a day with similar forced induction carby setup.

yours are standard though he's talking about ones with "twice the factory poweroutput" i highly doubt they'd last anywhere near as long as something stock.

anyways didn't mean to start a shit fight lol was just giving Dezz some suggestions other than the usual jap stuff.

I know plenty of people with expensive euro cars... not one would go near them with a spanner (even though a few, like my old man, are mechanically minded)

reason being: some don't know how, or they spent too much on the car to have to worry about that sort of stuff etc

I agree they aren't necessarily harder to work on, that wasn't my point... all i'm saying is fk all people actually do it themselves, and instead pay through the nose to have it done for them

i think they're just worried about resale. a complete service history book adds a decent amount to resale value. im not one who's fussed about that though anyone can make a fake history book and get a mechanic mate to stamp it all..

each to their own

I have met my match.

Home made arak shot (so strong it's flammable)

Ended up spitting it all back thru my nose + nosebleed, drooling for a few mins non stop and a wikid sore throat as well as having everything in my stomach exit via my mouth.

Shit was f**kED

so you are a fag....

every ethnic minority has their own home made alcohol that they think is 90% alcohol cos it's so strong....

it's not a high alcohol content that makes it taste strong, it's just cos it's badly made in nonna's toilet with f**k all skill.

go drink a shot of stroh, (80%) pure polish spirit (82%) or spyritus (95%) and then you'll see what real high alcohol content is

not to mention that all alcohols are flammable

go drink a shot of stroh, (80%) pure polish spirit (82%) or spyritus (95%) and then you'll see what real high alcohol content is

yo dawg, i herd you like high alcohol content. so I got you some methanol. 100% nyukkuh.

But yeah, arrak isn't strong, it's just shithouse homebrew crap that's badly distilled, hence making you feel like you participated in some two guys one cup action. Hell even properly mass manufactured arrak that we get from Sri Lanka (one of the benefits of a cultural history of being an arab trading port in the indian ocean) tastes like ass cos of the raw material content, not the alcohol percentage.

so you are a fag....

every ethnic minority has their own home made alcohol that they think is 90% alcohol cos it's so strong....

it's not a high alcohol content that makes it taste strong, it's just cos it's badly made in nonna's toilet with f**k all skill.

go drink a shot of stroh, (80%) pure polish spirit (82%) or spyritus (95%) and then you'll see what real high alcohol content is

not to mention that all alcohols are flammable

not saying its 90% lol

just saying its unusually strong, its usually a tad stronger than a chartreuse (spelling) shot but this time it was just f**ked up

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...